summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* toolchain/glibc: update to latest 2.26 commitmasterHans Dedecker2018-09-131-2/+2
| | | | | | | c5c90b480e Fix segfault in maybe_script_execute. 174709d879 pthread_cond_broadcast: Fix waiters-after-spinning case [BZ #23538] Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcpd: enable ipv6 server mode only when it is supportedRosy Song2018-09-122-2/+2
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* iproute2: q_cake: Add printing of no-split-gso optionKevin Darbyshire-Bryant2018-09-122-2/+4
| | | | | | | | When the GSO splitting was turned into dual split-gso/no-split-gso options, the printing of the latter was left out. Add that, so output is consistent with the options passed Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mac80211: brcmfmac: backport CYW89342 support & fixes from 4.20Rafał Miłecki2018-09-124-0/+208
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kmod-sched-cake: fix 6in4/gso performance issueKevin Darbyshire-Bryant2018-09-121-3/+3
| | | | | | | | Bump to latest upstream cake: Add workaround for wrong skb->mac_len values after splitting GSO Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* netifd: update to latest HEADFlorian Fainelli2018-09-111-3/+3
| | | | | | 0059335c5b60 CMakeList: Check that compiler supports -Wimplicit-fallthrough Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* tools/expat: fix docbook2man error on some systemsMarko Ratkaj2018-09-111-0/+3
| | | | | | | | On some systems (Gentoo) configure stage fails because of docbook2man working with SGML rather than with XML. We don't need xmlwf man pages so we disable this. Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
* wireguard: bump to 0.0.20180910Jason A. Donenfeld2018-09-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | * curve25519: arm: do not modify sp directly * compat: support neon.h on old kernels * compat: arch-namespace certain includes * compat: move simd.h from crypto to compat since it's going upstream This fixes a decent amount of compat breakage and thumb2-mode breakage introduced by our move to Zinc. * crypto: use CRYPTOGAMS license Rather than using code from OpenSSL, use code directly from AndyP. * poly1305: rewrite self tests from scratch * poly1305: switch to donna This makes our C Poly1305 implementation a bit more intensely tested and also faster, especially on 64-bit systems. It also sets the stage for moving to a HACL* implementation when that's ready. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* kernel: add missing symbolJohn Crispin2018-09-101-0/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* base-files: /etc/services: add missing 'rpcbind' aliasAndy Walsh2018-09-101-2/+2
| | | | | | | | * add missing 'rpcbind' alias to /etc/services Allows rpcbind to open its 111 port and be reachable via lan, this is the default behaviour. Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
* ramips: Fix early memory calculation for certain MIPS platformsTobias Wolf2018-09-101-0/+45
| | | | | | | | | Kernel upstream commit 67a3ba25aa95 ("MIPS: Fix incorrect mem=X@Y handling") introduced a new issue for rt288x where "PHYS_OFFSET" is 0x0 but the calculated "ramstart" is not. As the prerequisite of custom memory map has been removed, this results in the full memory range of 0x0 - 0x8000000 to be marked as reserved for this platform. This patch adds the originally intended prerequisite again. Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
* ar71xx: Skip more hashed blocks for OM2P(-HS) 64k variantSven Eckelmann2018-09-101-1/+1
| | | | | | | | | | | | | | | | | | The OM2P(-HS)v4 got a variant which uses a slightly different flash. The standard versions used a flash with 256KB blocks which is no longer available. The replacement flash uses a flash with 64K blocks. The padding for the image rootfs is already for 64K and 256K and thus can be flashed on the device without any problems. Unfortunately, the bootloader will check $rootfs_size (rounded down to the nearest 64k block) minus 1x 64k. But it is now possible that the new JFFS2 rootfs_data starts even earlier and modifies the checked region. The check will then fail and the backup image (when available) will be booted. Just setting it to the same number of skipped blocks as other 64K models avoids this problem. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* tools/expat: Update to 2.2.6Daniel Engberg2018-09-101-2/+2
| | | | | | Update (lib)expat to 2.2.6 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/e2fsprogs: Update to 1.44.4Daniel Engberg2018-09-101-2/+2
| | | | | | Update e2fsprogs to 1.44.4 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ath79: ubnt-xm: add rssileds packageLech Perczak2018-09-101-1/+1
| | | | | | | | In order to make RSSI indicator on the device work out of box, include "rssileds" package in per-device rootfs image by default for Ubiquiti XM family. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: ubnt-xm: create RSSI monitor on wlan0Lech Perczak2018-09-101-0/+1
| | | | | | | | | When mapping for RSSI LEDs was defined for interface wlan0 on Ubiquiti XM family, the mapping for rssileds monitor was omitted by mistake. Therefore create the mapping, so RSSI LEDs work without additional configuration, after starting rssileds service. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* ath79: add support for Buffalo WZR-HP-AG300HBernhard Frauendienst2018-09-107-27/+336
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffalo WZR-HP-AG300H is a dual band router based on Qualcom Atheros AR7161 rev 2 Specification: - 680 MHz CPU (Qualcomm Atheros AR7161) - 128 MiB RAM (2x Samsung K4H511638G-LCCC) - 32 MiB Flash (2x Winbond 25Q128BVFG) - WiFi 5 GHz a/n (Atheros AR9220) - WiFi 2.4 GHz b/g/n (Atheros AR9223) - 1000Base-T WAN (Atheros AR7161) - 4x 1000Base-T Switch (Atheros AR8316) - 1x USB 2.0 - 3 Buttons (AOSS/WPS, Reset, USB Eject) - 2 Slide switches (Router (on/off/auto), Movie Engine (on/off)) - 9 LEDs (Power green, WLAN 2GHz green, WLAN 2GHz amber, WLAN 5GHz green, WLAN 5GHz LED amber, Router green, Diag red, Movie Engine blue, USB green) It is already supported by the ar71xx target. For more information on the device visit the wiki: <https://openwrt.org/toh/buffalo/wzr-hp-ag300h> Serial console: - The UART Header is next to Movie Engine Switch. - Pinout is RX - TX - GND - 3.3V (Square Pad is 3.3V) - The Serial setting is 115200-8-N-1. Installation of OpenWRT from vendor firmware: - Connect to the Web-interface at http://192.168.11.1 - Go to “Administration” → “Firmware Upgrade” - Upload the OpenWrt factory image Tested: - Ethernet (LAN, WAN) - WiFi - Installation - via TFTP rescue - via factory image - on firmware v1.77 (28-05-2012) - on pro firmware v24SP2 r30356 (26-03-2018) - via sysupgrade from ar71xx (wlan devices don't work because of new names) - via sysupgrade from itself - Buttons - LEDS - USB (Power control and device recognition) Signed-off-by: Bernhard Frauendienst <openwrt@nospam.obeliks.de>
* kernel: add driver for virtual mtd_concat devicesBernhard Frauendienst2018-09-103-0/+372
| | | | | | | | | | | | | | | | | | | | | | | | | | Some systems require multiple flash chips to be concatenated and read as a single mtd device. The ar71xx target provides custom code to create such mtdconcat devices. When porting devices to ath79, however, there is no way to create such devices from within the device tree. This commit adds a driver for creating virtual mtd-concat devices to the ath79 target. Nodes must have a compatible = "virtual,mtd-concat" line, and define a list of devices to concat in the 'devices' property, for example: flash { compatible = "virtual,mtd-concat"; devices = <&flash0 &flash1>; }; The driver is added to the very end of the mtd Makefile to increase the likelyhood of all child devices already being loaded at the time of probing, preventing unnecessary deferred probes which might in turn cause other problems (like failure to load MAC addresses from art because the partitions are not loaded yet). Signed-off-by: Bernhard Frauendienst <openwrt@nospam.obeliks.de>
* ath79: add support for ELECOM WRC-300GHBK2-IINAGAKI Hiroshi2018-09-103-0/+202
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELECOM WRC-300GHBK2-I is a 2.4 GHz wireless router, based on Qualcomm Atheros QCA9563. Specification: - Qualcomm Atheros QCA9563 - 64 MB of RAM (DDR2) - 8 MB of Flash (SPI-NOR) - 2T2R 2.4 GHz wifi - SoC internal - 5x 10/100/1000 Mbps Ethernet - 3x LEDs, 4x keys(connected to GPIO: 3x) - UART header on PCB - TX, GND, RX, Vcc from ethernet port side - 115200n8 Flash instruction using factory image: 1. Boot the WRC-300GHBK2-I normaly and connect the computer to its LAN port 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新 手動更新（アップデート）") 3. Select the OpenWrt factory image and click apply ("適用") button to perform firmware update 4. On the (initramfs) factory image, execute "mtd erase firmware" to erase stock firmware and execute sysupgrade with squashfs-sysupgrade image for WRC-300GHBK2-I 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* firmware-utils: mkedimaximg: add "big-endianness mode" optionINAGAKI Hiroshi2018-09-101-8/+35
| | | | | | | | | In addition to the default little-endianness format, I added a mode so that we can generate firmware with big-endianness format. example: ELECOM WRC-300GHBK2-I (QCA9563) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: backport i2c-gpio working over slow can_sleep GPIOsMartin Schiller2018-09-102-0/+168
| | | | Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* kernel: backport rtc ds1308 support to 4.9Martin Schiller2018-09-101-0/+51
| | | | Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* libpcap: patch to add limits.h to pcap-usb-linux.cEneas U de Queiroz2018-09-101-0/+22
| | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. This is an upstream-applied patch that fixes 'PATH_MAX' and 'NAME_MAX' undeclared when compiling on musl with CONFIG_PCAP_HAS_USB. [aafa351] pcap-usb-linux.c: add missing limits.h for musl systems. Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
* mvebu: Replace RTC initialization patch with upstreamed versionRosen Penev2018-09-103-74/+78
| | | | | | | | | While we're at it, rename the patches to their proper git format-patch name. Tested on a Turris Omnia. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* usbutils: Update usb.ids to 0.315Rosen Penev2018-09-101-5/+5
| | | | | | | | Referencing the version instead of revision should fix uscan. Tested on Turria Omnia. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ath79: add support for WD My Net Wi-Fi Range ExtenderChristian Lamparter2018-09-105-1/+221
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch ports over support for the device from ar71xx. SOC: AR7370 (Wasp - AR9344 rev2 0001974c) RAM: Winbond W9725G6KB-25 32MiB FLASH: Winbond 25Q64FVSIG 8MiB WLAN: AR9380 Dual-Band 802.11abgn 3x3:3 INPUT: WPS, RESET button (hardware on/off toggle button) LED: Power, LAN, WiFi, 3 RSSI-Leds (low, medium, high) Serial: Header Next to the winbond flash chip (labeld JP1) Pinout is GND - NC - RX - TX - 3V3 (JP1) The Serial setting is 115200-8-N-1. - Installation via uboot's upgrade command 0. attach serial cable 1. interrupt uboot and enter "upgrade code.bin" into the u-boot prompt ar7240> upgrade code.bin 2. rename openwrt...sysupgrade.bin to code.bin on PC 3. run a tftp-client on the PC (shell)$ tftp 192.168.1.230 binary put code.bin 4. wait for the device to finish [...] Copy buff to Flash from 0x9f040000 length 0x79f000 Copy to Flash... write addr: 9f040000 done 5. enter "go" in the u-boot prompt ar7240> go - TFTP ramdisk image boot from the uboot prompt (tftp server defaults to serverip 192.168.1.254) => tftpboot 81000000 initramfs.bin => bootm Tested and working: - LEDs - Buttons - Ethernet - Wi-Fi - OpenWRT sysupgrade For flashing and debricking information see: <https://openwrt.org/toh/wd/rext> Users coming from ar71xx can use sysupgrade too. But I highly advise to no save the old configuration and start from a clean state. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: port cybertan_part from ar71xxChristian Lamparter2018-09-103-0/+183
| | | | | | | | | | | | | This patch ports the cybertan_part code from ar71xx and converts the driver to a DT-supported mtd parser. As a result, it will no longer add the u-boot, nvram and art partitions, which were never part of the special Cybertan header. Instead these partitions have to be specified in the DT, which has the upside of making it possible to add properties (i.e.: read-only), labels and references to these important partitions. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: add iw command wrapper with error loggingRafał Miłecki2018-09-101-0/+4
| | | | | | | | | | | | | | | | | | | | | Currently it's close to impossible to tell what part of mac80211 setup went wrong. Errors logged into system log look like this: radio0 (6155): command failed: No error information (-524) radio0 (6155): command failed: Not supported (-95) radio0 (6155): command failed: I/O error (-5) radio0 (6155): command failed: Too many open files in system (-23) With this commit change it's getting clear: command failed: No error information (-524) Failed command: iw dev wlan0 del command failed: Not supported (-95) Failed command: iw phy phy0 set antenna_gain 0 command failed: I/O error (-5) Failed command: iw phy phy0 set distance 0 command failed: Too many open files in system (-23) Failed command: iw phy phy0 interface add wlan0 type __ap Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* hostapd: Fix compile with OpenSSL 1.1.0 + no deprecated APIsRosen Penev2018-09-101-0/+40
| | | | | | | | Patch was accepted upsteam: https://w1.fi/cgit/hostap/commit/?id=373c796948599a509bad71695b5b72eef003f661 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* zynq: rename zedboard with correct manufacturerLuis Araneda2018-09-103-9/+51
| | | | | | | | | The board is made by Avnet, so rename it accordingly as upstream has done it Also move the device to maintain alphabetic order Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: add sdcard image supportLuis Araneda2018-09-103-2/+48
| | | | | | | | | | | | | | | Implement the generation of sdcard images with ext4 or squashfs + f2fs overlay, but only enable the latter automatically Additionally, add mkf2fs and e2fsprogs to default packages to manipulate ext4 and f2fs filesystems Finally, disable the automatic generation of initramfs and rootfs.tar.gz images, as they are no longer required (they can still be selected in menuconfig) Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: enable kernel overlay and f2fs supportLuis Araneda2018-09-101-1/+6
| | | | | | | Select configs to enable build-in F2FS support and use the overlayfs provided by generic config Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: remove bootargs from kernel configLuis Araneda2018-09-101-2/+0
| | | | | | | | Use options from generic instead of target-specific, as the bootargs are now passed by the bootloader and can be device-specific Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* uboot-zynq: use a file to modify the default environmentLuis Araneda2018-09-102-0/+3
| | | | | | | | | Follow the strategy of other targets and create a default environment file, uEnv.txt, to configure the behavior of U-Boot. For now, use it to pass bootargs to the kernel Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* uboot-zynq: copy U-Boot images to STAGING_DIRLuis Araneda2018-09-101-0/+9
| | | | | | | | | | | Create a directory inside STAGING_DIR and copy U-Boot output images, so they can be used later when creating the sdcard image Additionally, like others targets, override the default install method to avoid copying the images to bin directory Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* uboot-zynq: automatically select the appropriate variantLuis Araneda2018-09-101-0/+5
| | | | | | | | Select the U-Boot variant automatically based on the current selected device, and hide the package from menuconfig Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* uboot-zynq: remove ZC706 boardLuis Araneda2018-09-101-4/+0
| | | | | | | The board was added when creating the target, but the corresponding device was never defined inside the target Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* dnsmasq: bump to dnsmasq 2.80test6Hans Dedecker2018-09-092-4/+4
| | | | | | | | | | | | | | | | Refresh patches Changes since latest bump: af3bd07 Man page typo. d682099 Picky changes to 47b45b2967c931fed3c89a2e6a8df9f9183a5789 47b45b2 Fix lengths of interface names 2b38e38 Minor improvements in lease-tools 282eab7 Mark die function as never returning c346f61 Handle ANY queries in context of da8b6517decdac593e7ce24bde2824dd841725c8 03212e5 Manpage typo. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* tools/cmake: Update to 3.12.2Daniel Engberg2018-09-091-2/+2
| | | | | | Update CMake to 3.12.2 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* curl: Update to 7.61.1Daniel Engberg2018-09-091-3/+3
| | | | | | Update curl to 7.61.1 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* scripts/ipkg-build: quash error messages when conffiles.resolved is emptyYousong Zhou2018-09-091-2/+4
| | | | | | | | | | | | | | | When Package/xx/conffiles only contains directories that are empty at package time, conffiles.resolved will be missing and the following error messages will appear in the build log. /home/yousong/git-repo/openwrt/openwrt/scripts/ipkg-build -c -o 0 -g 0 /home/yousong/git-repo/openwrt/openwrt/build_dir/target-mips_24kc_musl/linux-malta_be/openvswitch-2.10.0/ipkg-mips_24kc/openvswitch-common /home/yousong/git-repo/openwrt/openwrt/bin/packages/mips_24kc/packages mv: cannot stat 'CONTROL/conffiles.resolved': No such file or directory chmod: cannot access 'CONTROL/conffiles': No such file or directory It will not break the ipkg-build process. The change is merely cosmetic to not cause confusion when reading logs Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* scripts/metadata.pm: avoid adding dup names in provides listYousong Zhou2018-09-091-0/+1
| | | | | | | | | | | | The need arises from building Open vSwitch kernel datapath modules, e.g. - kmod-openvswitch from Linux upstream - kmod-openvswitch-intree from openvswitch source code where both provides virtual package "kmod-openvswitch" for userspace packages to select and depend on Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* odhcp6c: add client fqdn and reconfigure optionspacien2018-09-082-3/+9
| | | | | | | | Allowing DHCPV6_CLIENT_FQDN and DHCPV6_ACCEPT_RECONFIGURE to be turned off. Defaulting to false, former behavior remains unchanged. Signed-off-by: pacien <pacien.trangirard@pacien.net> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* ar71xx: fix switch probing on kernel 4.14Koen Vandeputte2018-09-071-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bump to 4.14 changed the way mdio probes behind switches. While the board_info is added to the list, the code that actually inserted the list info into the phydev structure was missing. This resulted in non-working ethernet ports. Re-add it to fix switch probing. This mimics the exact behaviour as it was in kernel 4.9. Before: [ 1.066007] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0 [ 1.073409] Atheros AR8216/AR8236/AR8316: probe of ag71xx-mdio.0:00 failed with error -22 [ 1.102455] libphy: ag71xx_mdio: probed [ 1.737938] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Generic PHY] [ 1.747994] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII [ 2.377642] ag71xx-mdio.1: Found an AR934X built-in switch [ 2.429938] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII After: [ 11.163357] libphy: Fixed MDIO Bus: probed [ 11.319898] libphy: ag71xx_mdio: probed [ 11.360844] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0 [ 12.447398] libphy: ag71xx_mdio: probed [ 13.077402] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316] [ 13.088989] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII [ 13.717716] ag71xx-mdio.1: Found an AR934X built-in switch [ 13.769990] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* gdb: bump to 8.2Koen Vandeputte2018-09-073-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | *** Changes in GDB 8.2 Support for the following target has been added: RiscV ELF (riscv*-*-elf) Support for following targets and native configurations has been removed: m88k running OpenBSD (m88*-*-openbsd*) SH-5/SH64 ELF (sh64-*-elf*) SH-5/SH64 (sh*) SH-5/SH64 running GNU/Linux (sh*-*-linux*) SH-5/SH64 running OpenBSD (sh*-*-openbsd*) Various Python API enhancements Aarch64/Linux enhancements: SVE support. Hardware watchpoints improvements for entities stored at unaligned addresses. New "c" response to disable the pager for the rest of the current command. C expressions can now use _Alignof, and C++ expressions can now use alignof. Improved flexibility for loading symbol files. The 'info proc' command nows works on running processes on FreeBSD systems as well as core files created on FreeBSD systems. A new --enable-codesign=CERT configure option to automatically codesign GDB after build (useful on MacOS X). Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* toolchain/gdb: bump to 8.2Koen Vandeputte2018-09-073-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | *** Changes in GDB 8.2 Support for the following target has been added: RiscV ELF (riscv*-*-elf) Support for following targets and native configurations has been removed: m88k running OpenBSD (m88*-*-openbsd*) SH-5/SH64 ELF (sh64-*-elf*) SH-5/SH64 (sh*) SH-5/SH64 running GNU/Linux (sh*-*-linux*) SH-5/SH64 running OpenBSD (sh*-*-openbsd*) Various Python API enhancements Aarch64/Linux enhancements: SVE support. Hardware watchpoints improvements for entities stored at unaligned addresses. New "c" response to disable the pager for the rest of the current command. C expressions can now use _Alignof, and C++ expressions can now use alignof. Improved flexibility for loading symbol files. The 'info proc' command nows works on running processes on FreeBSD systems as well as core files created on FreeBSD systems. A new --enable-codesign=CERT configure option to automatically codesign GDB after build (useful on MacOS X). Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: backport upstream fixesKoen Vandeputte2018-09-0714-8/+679
| | | | | | | | | | Backport most significant upstream fixes (excl. hwsim fixes) Refreshed all patches. Contains important fixes for CSA (Channel Switch Announcement) and A-MSDU frames. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.68Koen Vandeputte2018-09-0725-241/+164
| | | | | | | | | | | | | | | | Refreshed all patches. Remove upstream accepted: - 330-Revert-MIPS-BCM47XX-Enable-74K-Core-ExternalSync-for.patch Altered: - 303-v4.16-netfilter-nf_tables-remove-multihook-chains-and-fami.patch - 308-mips32r2_tune.patch Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.125Koen Vandeputte2018-09-074-6/+6
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 3.18 to 3.18.121Koen Vandeputte2018-09-072-3/+3
| | | | | | | | | Refreshed all patches. Compile-tested on: adm5120 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
generated by cgit v1.1 at 2024-11-21 21:38:06 +0000