summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* Removed Alix.mk profile which was accidently left as an empty file applying ↵Daniel Dickinson2011-05-131-0/+0
| | | | | | the patch during r26879 and r26880. SVN-Revision: 26882
* Add missed files from previous commit: This patch provides an image suitable ↵Daniel Dickinson2011-05-132-0/+72
| | | | | | | | | | | | | | | | | | | for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's. Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker. GPIO 1 : SIM select (Alix6) GPIO 6 : LED1 GPIO 25 : LED2 GPIO 27 : LED3 or RFKILL (Alix6) GPIO 24 : Soft switch 1 No kernel version bump. Added i2c-scx200-acb for lm-sensors support. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 26880
* This patch provides an image suitable for the alix2*, alix3, and alix6 ↵Daniel Dickinson2011-05-133-17/+2
| | | | | | | | | | | | | | | | | | | headless (non-VGA equipped) SBC's. Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker. GPIO 1 : SIM select (Alix6) GPIO 6 : LED1 GPIO 25 : LED2 GPIO 27 : LED3 or RFKILL (Alix6) GPIO 24 : Soft switch 1 No kernel version bump. Added i2c-scx200-acb for lm-sensors support. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 26879
* bcm63xx: Add support for the T-Home Speedport W 303VFlorian Fainelli2011-05-114-0/+120
| | | | | | | | | Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26878
* bcm63xx: Add firmware helpers for T-Home Speedport W 303VFlorian Fainelli2011-05-113-0/+379
| | | | | | | | | Add two helpers for generating correctly tagged images for the T-Home Speedport W 303V Typ B as well as xor'd ones as required by CFE. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26877
* bcm63xx: Update support for the DSL-274xB revision CFlorian Fainelli2011-05-114-24/+31
| | | | | | | | | | | | | Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used for the rev C3 (same hardware) and add a fixup for C2. Also generate images for C3. While we are at it, rename the LEDs to conform to the Linux LED naming conventions. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26876
* bcm63xx: Accept any led with power in its name as power ledFlorian Fainelli2011-05-111-1/+1
| | | | | | Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26875
* bcm63xx: Decouple Board ID and image name for fixupFlorian Fainelli2011-05-111-9/+9
| | | | | | | | | Make the fixup board ID independent from the image name to allow using the same board ID for similar devices. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26874
* switch to 2.6.38Florian Fainelli2011-05-116-1/+1590
| | | | SVN-Revision: 26873
* add missing 2.6.38 touchscreen config symbolsFlorian Fainelli2011-05-111-0/+2
| | | | SVN-Revision: 26872
* package/kernel/modules/other.mk is getting big enough that putting the LEDs ↵John Crispin2011-05-092-207/+216
| | | | | | | | stuff into its own file makes sense. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 26868
* (respin) 802.1Q VLAN support for ADM6996M/ADM6996FCJohn Crispin2011-05-0910-44/+791
| | | | | | | | | | | | | | | | | | | This patch adds 802.1Q VLAN support for the ADM6996M chip. The driver is loaded for both the FC and M model. It will detect which of the two chips is connected. The FC model is initialised, but no further functionality is offered. The PHY driver will always report "100 Mbit/s, link up", for both the M and FC models. This reflects the fact that the link between switch chip and Ethernet MAC is always on[1]. Further documentation can be found in the kernel's Documentation/networking/adm6996.txt Signed-of-By: Peter Lebbing <peter@digitalbrains.com> SVN-Revision: 26865
* ar71xx: populate LED3 on the JA76PF boardGabor Juhos2011-05-081-0/+5
| | | | | | Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> SVN-Revision: 26862
* ar71xx: add uci config for the WLAN LED on the WRT160NLGabor Juhos2011-05-081-0/+11
| | | | | | Based on a patch by Magyar Szabolcs <mszabi@freemail.hu> SVN-Revision: 26861
* ar71xx: use phy0tpt trigger for the WLAN LEDsGabor Juhos2011-05-082-2/+2
| | | | SVN-Revision: 26860
* ar71xx: remove superfluous fifo_cfg overridesGabor Juhos2011-05-081-6/+0
| | | | SVN-Revision: 26859
* ipv6: restore correct ECN handling on TCP xmit Thanks Dave TahtTravis Kemen2011-05-082-0/+50
| | | | SVN-Revision: 26858
* Deployment of IPv6 has opened up many more prefixes than just the 2000::/3 ↵Travis Kemen2011-05-081-2/+2
| | | | | | space, so a default route of ::/0 is more correct. Thanks Dave Taht SVN-Revision: 26857
* ar71xx: ag71xx: make switch register access atomicGabor Juhos2011-05-081-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reading of the PHY registers occasionally returns with bogus values under heavy load. This misleads the PHY driver and thus causes false link/speed change notifications which leads to performance loss. This is easily noticable during an iperf session: ... [ 3] 52.0-53.0 sec 11.3 MBytes 94.4 Mbits/sec [ 3] 53.0-54.0 sec 11.4 MBytes 95.4 Mbits/sec eth1: link down br-lan: port 2(eth1) entering forwarding state eth1: link up (100Mbps/Full duplex) br-lan: port 2(eth1) entering forwarding state br-lan: port 2(eth1) entering forwarding state [ 3] 54.0-55.0 sec 6.75 MBytes 56.6 Mbits/sec [ 3] 55.0-56.0 sec 0.00 Bytes 0.00 bits/sec [ 3] 56.0-57.0 sec 10.5 MBytes 88.1 Mbits/sec ... [ 3] 169.0-170.0 sec 11.4 MBytes 95.4 Mbits/sec [ 3] 170.0-171.0 sec 11.4 MBytes 95.4 Mbits/sec eth1: link up (10Mbps/Half duplex) [ 3] 171.0-172.0 sec 7.63 MBytes 64.0 Mbits/sec [ 3] 172.0-173.0 sec 9.38 MBytes 78.6 Mbits/sec eth1: link up (100Mbps/Full duplex) [ 3] 173.0-174.0 sec 11.3 MBytes 94.4 Mbits/sec [ 3] 174.0-175.0 sec 11.4 MBytes 95.4 Mbits/sec SVN-Revision: 26856
* ar71xx: ag71xx: fix section mismatch warningsGabor Juhos2011-05-082-2/+2
| | | | | | | | | | | | | | | | | | The function __devinit ag71xx_probe() references a function __devexit ag71xx_phy_disconnect(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of ag71xx_phy_disconnect() so it may be used outside an exit section. The function ag71xx_phy_disconnect() references a function in an exit section. Often the function ag71xx_ar7240_cleanup() has valid usage outside the exit section and the fix is to remove the __devexit annotation of ag71xx_ar7240_cleanup. SVN-Revision: 26855
* ar71xx: ag71xx: fix build error if debugfs is enabledGabor Juhos2011-05-081-2/+3
| | | | SVN-Revision: 26854
* base-files: retrigger usb coldplug after module loading, solves ↵Jo-Philipp Wich2011-05-082-1/+6
| | | | | | usb_modeswitch on boot and possibly others (#9352) SVN-Revision: 26848
* brcm47xx: update patchesHauke Mehrtens2011-05-0714-36/+74
| | | | SVN-Revision: 26846
* ar71xx: ag71xx: add debugfs entry for [rt]x_ringGabor Juhos2011-05-071-0/+92
| | | | SVN-Revision: 26845
* ar71xx: ag71xx: add timestamps to ag71xx_bufGabor Juhos2011-05-072-1/+2
| | | | SVN-Revision: 26844
* ar71xx: ag71xx: use dynamically allocated buffer for napi_statsGabor Juhos2011-05-071-9/+19
| | | | SVN-Revision: 26843
* ar71xx: ag71xx: use debugfs_remove_recursiveGabor Juhos2011-05-072-28/+7
| | | | SVN-Revision: 26842
* base-files: fix a typo in etc/bannerGabor Juhos2011-05-071-1/+1
| | | | SVN-Revision: 26841
* ar71xx: override wmac device name for the AR934x SoCsGabor Juhos2011-05-071-0/+1
| | | | SVN-Revision: 26840
* remove useless patchesFlorian Fainelli2011-05-062-29/+0
| | | | SVN-Revision: 26837
* fill maintainer infos for a couple of targetsFlorian Fainelli2011-05-0611-0/+11
| | | | SVN-Revision: 26836
* update to 2.6.38.2Florian Fainelli2011-05-053-193/+47
| | | | SVN-Revision: 26833
* add missing 2.6.38 symbolsFlorian Fainelli2011-05-051-0/+4
| | | | SVN-Revision: 26832
* brcm47xx: when detecting a ssb pci device without an own sprom write the ↵Hauke Mehrtens2011-05-056-50/+38
| | | | | | sprom data from the platform device to the correct pointer. SVN-Revision: 26829
* brcm47xx: fix typo in patchHauke Mehrtens2011-05-052-2/+2
| | | | SVN-Revision: 26828
* linux/ar71xx: add some missing symbols for nand/yaffs targetsAlexandros C. Couloumbis2011-05-051-0/+5
| | | | SVN-Revision: 26827
* lua: remove posix from Lua core, almost nothing uses it - saves 9k compressedJo-Philipp Wich2011-05-043-1476/+2
| | | | SVN-Revision: 26822
* ath9k: add noise floor calibration fix that should improve stabilityFelix Fietkau2011-05-041-0/+52
| | | | SVN-Revision: 26819
* linux/generic: port yaffs to 2.6.39Alexandros C. Couloumbis2011-05-041-0/+147
| | | | SVN-Revision: 26818
* linux/rb532: use kernel and initramfs tags on image generationAlexandros C. Couloumbis2011-05-041-4/+6
| | | | SVN-Revision: 26817
* comgt: add tty hotplug remove handling, only iterate each tty once (#9211)Jo-Philipp Wich2011-05-042-21/+20
| | | | SVN-Revision: 26816
* kernel: revert r26814Jo-Philipp Wich2011-05-031-16/+0
| | | | SVN-Revision: 26815
* kernel: add kmod-crypto-ipsec kmod-crypto-ipsec bundles some otherwise ↵Jo-Philipp Wich2011-05-031-0/+16
| | | | | | | | unprovided kernel crypto modules that are useful for IPSEC. This is an alternative to breaking these modules out into kmod-crypto-wq (crypto_wq.ko), kmod-crypto-rng (rng.ko and krng.ko), and kmod-crypto-iv (eseqiv.ko and chainiv.ko). Signed-off-by: Lars Hjersted <lars@hjersted.com> SVN-Revision: 26814
* kernel: add kmod-crypto-{wq,rng,iv} Add kmod-crypto-iv as a dependency for ↵Jo-Philipp Wich2011-05-031-1/+1
| | | | | | | | kmod-ipsec. Also remove the extraneous kmod-crypto-core dependency to eliminate recursion. Signed-off-by: Lars Hjersted <lars@hjersted.com> SVN-Revision: 26813
* kernel: add kmod-crypto-{wq,rng,iv} This patch adds kmod-crypto-wq, ↵Jo-Philipp Wich2011-05-031-0/+32
| | | | | | | | | | | | kmod-crypto-rng, and kmod-crypto-iv packages. These packages provide some missing kernel crypto modules which are required for IPSEC. The strongswan4, ipsec-tools, and possibly other IPSEC packages do not work properly without these modules. NOTE: The KCONFIG associated with each of these modules gets selected whenever CRYPTO_MANAGER (kmod-crypto-manager) is selected so these modules are already being built. Signed-off-by: Lars Hjersted <lars@hjersted.com> SVN-Revision: 26812
* geos: remove unneeded modules The via-sata and gpio-nsc modules are both ↵Jo-Philipp Wich2011-05-031-2/+2
| | | | | | unneeded on the Geos platform. SVN-Revision: 26811
* comgt: move ifup invocation back into background subshell to prevent hotplug ↵Jo-Philipp Wich2011-05-031-6/+3
| | | | | | deadlocks SVN-Revision: 26810
* comgt: move 3g hotplug handling to tty subsystem, fixes race on coldplug (#9211)Jo-Philipp Wich2011-05-032-7/+10
| | | | SVN-Revision: 26809
* base-files: cleanup permissions of device files in common hotplug rules (#9211)Jo-Philipp Wich2011-05-031-6/+15
| | | | SVN-Revision: 26808
* hotplug2: introduce tty subsystem events (#9211)Jo-Philipp Wich2011-05-031-1/+1
| | | | SVN-Revision: 26807
generated by cgit v1.1 at 2024-12-27 02:47:19 +0000