summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add support for Compex WPJ342John Crispin2016-04-0913-0/+218
| | | | | | | | | | | | OpenWrt can be flashed with following uboot commands: tftpboot 0x80500000 openwrt-ar71xx-generic-wpj342-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 49157
* ar71xx: fix nondeterministic hangs during bootconsole/console handoverJohn Crispin2016-04-092-0/+108
| | | | | | | | | | | | | | | | | Reconfiguring the UART when the FIFO is not empty may cause the boot to hang. This hang is extremely suspectible to timing differences; recompiling the kernel with the same configuration, but different UTS_VERSION timestamps can yield images that hang more or less often. Sometimes images are produced that hang reproducibly. This patch should also make it into one of the next linux-stable releases, but it's better to get this fixed as soon as possible. Fixes #21773, #21857. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 49156
* ar71xx: add OM5P-ACv2 to the OM5P-AC profileJohn Crispin2016-04-091-2/+2
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49155
* ar71xx: extract ath10k wifi board.bin for the OpenMesh OM5P-ACv2 boardJohn Crispin2016-04-091-1/+2
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49154
* uboot-envtools: add OpenMesh OM5P-ACv2 supportJohn Crispin2016-04-091-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49153
* om-watchdog: add OpenMesh OM5P-ACv2 supportJohn Crispin2016-04-091-1/+2
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49152
* ar71xx: enable sysupgrade for the OpenMesh OM5P-ACv2John Crispin2016-04-092-2/+5
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49151
* ar71xx: add user-space support for the OpenMesh OM5P-ACv2John Crispin2016-04-092-1/+5
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49150
* ar71xx: add kernel support for the OpenMesh OM5P-ACv2 boardJohn Crispin2016-04-096-0/+230
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49149
* ar71xx: create profile and build image for the OpenMesh OM5P-AC boardJohn Crispin2016-04-092-1/+13
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49148
* ar71xx: extract ath10k wifi board.bin for the OpenMesh OM5P-AC boardJohn Crispin2016-04-091-0/+4
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49147
* uboot-envtools: add OpenMesh OM5P-AC supportJohn Crispin2016-04-091-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49146
* om-watchdog: add OpenMesh OM5P-AC supportJohn Crispin2016-04-091-0/+3
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49145
* ar71xx: enable sysupgrade for the OpenMesh OM5P-ACJohn Crispin2016-04-092-3/+10
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49144
* scripts/om-fwupgradecfg-gen.sh: add support for the OM5P-ACJohn Crispin2016-04-091-2/+2
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49143
* ar71xx: add user-space support for the OpenMesh OM5P-ACJohn Crispin2016-04-093-0/+11
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49142
* ar71xx: add kernel support for the OpenMesh OM5P-AC boardJohn Crispin2016-04-096-0/+206
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49141
* scripts/om-fwupgradecfg-gen.sh: Generate sha256sum for uboot verificationJohn Crispin2016-04-091-0/+4
| | | | | | | | | | Future Open Mesh u-boot versions are changing the check of the image files (vmlinux, rootfs) from md5 to sha256. Having both in them should be enough to ensure backward and forward compatibility. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49140
* brcmfmac43430-firmware: switch to @GITHUB download aliasJohn Crispin2016-04-091-1/+1
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 49139
* download: add @GITHUB download facilityJohn Crispin2016-04-092-1/+6
| | | | | | | | Define a new alias (@GITHUB) for downloading raw github repository files Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 49138
* lantiq-dsl: add missing blank in dsl outputJohn Crispin2016-04-091-1/+1
| | | | | | | | blank inserted before ACTATP Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> SVN-Revision: 49137
* lantiq-dsl: bugfix latency values swapped for lucistatJohn Crispin2016-04-091-2/+2
| | | | | | | | swapped wrong latency output Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> SVN-Revision: 49136
* lantiq-dsl: bugfix db negative sign after commaJohn Crispin2016-04-091-1/+1
| | | | | | | | If db is negative minus sign was shown after comma Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> SVN-Revision: 49135
* arc770: enable unaligned access handling simulation in softwareJohn Crispin2016-04-092-2/+34
| | | | | | | | | | | | This enables misaligned access handling by software in Linux kernel. With some wireless drivers (ath9k-htc and mt7601u for example) we see misaligned accesses here and there and to cope with that without fixing stuff in the drivers we're just gracefully handling it on ARC. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 49134
* arc770: build kmod-ath9k-htc wpad-mini by defaultJohn Crispin2016-04-092-2/+2
| | | | | | | | | | | | | | | | AXS101 beind a development board lacks built-in wireles inerfaces. So we have to use external USB dongles to turn the board into wireless router. The best USB Wi-Fi dongles to work in AP-mode seem to be based on ath9k-htc chipset. And so with that change we add support of mentioned dongles in default and axs101 builds. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 49133
* mediatek: update patchesJohn Crispin2016-04-0978-4145/+72
| | | | | | | | adds a few ethernet fixes Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 49132
* ramips: Disable the SD driver by default on MT7621John Crispin2016-04-094-4/+4
| | | | | | | | | | | | | | | | The SD driver has been a long and dragging issue on the MT7621 platforms as it hasn't worked for months resulting in unbootable devices. Until it's fixed, disable it in the default profiles. Reports / Discussed here: https://dev.openwrt.org/ticket/21392 https://dev.openwrt.org/ticket/21834 https://dev.openwrt.org/ticket/21995 https://forum.openwrt.org/viewtopic.php?id=59092 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> SVN-Revision: 49131
* ramips: Fixes for LinkIt 7688John Crispin2016-04-094-2/+79
| | | | | | | | | | | | | Misc fixes for LinkIt 7688 board: - Copy the right wireless firmware for the mt7688 - Add back '0065-mt7688-fixes.patch', left out after the move to Linux 4.4. - Remove SPI_DEV from linux config which otherwise causes a massive warning - Add wmac to LINKIT7688.dts so wireless works Signed-off-by: Adam Kent <adam@semicircular.net> SVN-Revision: 49130
* ramips: Adjust image size limit for the D-Link DIR-860L B1John Crispin2016-04-092-0/+96
| | | | | | | | | | Currently the maximum image size defaults to 8Mbyte even though this model has 16Mbyte of flash memory. Tested and works on my device. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> SVN-Revision: 49129
* ramips: fix for Planex MZK-WDPR (lcd control gpio).John Crispin2016-04-091-0/+10
| | | | | | | | | add lcd control gpio pin for Planex MZK-WDPR. LCD board initial timming is GPIO control. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> SVN-Revision: 49128
* ramips: mt7621: fix Ubiquiti EdgeRouter X profileJohn Crispin2016-04-091-1/+2
| | | | | | | | Remove unnecessary packages to reduce image size so it fits in initramfs (to enable upgrading from factory firmware). Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49127
* ramips: mt7621: sync MQmaker WiTi profile name to dts nameJohn Crispin2016-04-091-3/+3
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49126
* ramips: enable device profiling by dtsJohn Crispin2016-04-091-0/+1
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49125
* ramips: mt7621: add a device to TARGET_DEVICES after it's definitionJohn Crispin2016-04-091-4/+12
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49124
* ramips: mt7621: fix initramfs image for ubnt-erxJohn Crispin2016-04-091-46/+20
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49123
* bcm53xx: add basic support for Netgear R7900Rafał Miłecki2016-04-097-13/+87
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49122
* bcm53xx: add PCI iproc patch adding abort handlerRafał Miłecki2016-04-081-0/+42
| | | | | | | | This prevents die() during PCI bus probe. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49121
* Revert "bcm53xx: revert patch removing imprecise abort workaround"Rafał Miłecki2016-04-081-66/+0
| | | | | | | | | This reverts commit r48961. It didn't fix PCIe host driver issue as there are more aborts triggered by it. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49120
* mwlwifi: upgrade to 10.3.0.17-20160324Imre Kaloz2016-04-061-2/+2
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 49119
* bcm53xx: use the final fix for iproc bcma regressionRafał Miłecki2016-04-014-65/+190
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49114
* bcm53xx: drop unneeded 4.3 SPROM patchRafał Miłecki2016-04-011-69/+0
| | | | | | | | | | | | | 4.3 isn't oficially used anymore but it may be useful for debugging PCI host driver regression. SPROM driver doesn't seem to work correctly with 4.3: [ 2.336686] bcma: bus0: Using fallback SPROM failed (err -2) [ 2.342366] bcma: bus0: No SPROM available but it at least compiles now. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49113
* package/utils/usbutils: Update USB IDs list to snapshot 2015-12-17John Crispin2016-04-011-5/+5
| | | | | | | | | Updates USB IDs list to snapshot 2015-12-17 and changes copyright to 2016. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> SVN-Revision: 49112
* package/libs/libusb: Update to 1.0.20John Crispin2016-04-011-3/+3
| | | | | | | | Updates libusb to version 1.0.20 and changes copyright to 2016. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> SVN-Revision: 49111
* package/libs/lzo: update version to 2.09John Crispin2016-04-011-3/+3
| | | | | | | | Updates lzo to version 2.09 and changes copyright to 2016. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> SVN-Revision: 49110
* ar71xx: WPN824N: enable buttonsJohn Crispin2016-04-011-5/+33
| | | | | | | | Enable buttons connected to the GPIOs of the AR9285. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> SVN-Revision: 49109
* ar71xx: WPN824N: set WLAN LED nameJohn Crispin2016-04-011-5/+2
| | | | | | | | | Make use of ap9x_pci_setup_wmac_led_name() to set the name of the WLAN LED. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> SVN-Revision: 49108
* ar71xx: fix the revision of a few TP-LINK devices in AR71XX_MODEL to match ↵John Crispin2016-04-011-0/+8
| | | | | | | | | | | | | labels/image names Let's not confuse users about the revisions of their devices when we can easily avoid it. Not tested on real hardware. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 49107
* ar71xx: avoid AR71XX_MODEL ending with a space on some TP-LINK-like devicesJohn Crispin2016-04-011-4/+4
| | | | | | | | | | Instead of adding the space when combining $model and $hwver, add the space to the beginning of $hwver, so the resulting string won't end with a space when $hwver is set to the empty string. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 49106
* ar71xx: check both HWID and HWREV on upgrades of TP-LINK devicesJohn Crispin2016-04-011-4/+12
| | | | | | | | | There's no reason for us to be more lenient than the stock firmware, so better check the HWREV as well to avoid bricked devices. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 49105
* ramips: move different subtarget image generation to separate makefiles to ↵John Crispin2016-04-018-935/+865
| | | | | | | | | | | | | | improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
generated by cgit v1.1 at 2024-12-04 05:40:16 +0000