summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* generic: b53: fix reverted error check in probeJonas Gorski2013-02-101-1/+1
| | | | | | | | | | | | b53_switch_detect returns value returned by b53_read8, which is 0 for success. So fail (and return error) only if b53_switch_detect returned something else than 0. This fixes supported and advertising being zeros for MDIO access. Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35534
* bcm63xx: handle huawei nvram layoutJonas Gorski2013-02-108-10/+108
| | | | | | | | | Use a different length for calculating the nvram checksum on hauwei boards. Fixes boot on HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35533
* generic: ar8216: move sleep out of the loopGabor Juhos2013-02-091-1/+2
| | | | | | | | | | It is enough to sleep once after ANEG is enabled on all PHYs. This reduces boot time on boards with AR8316 switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35532
* polarssl: security update (1.2.5) addressing CBC TLS issueTim Yardley2013-02-082-15/+15
| | | | | | Signed-off-by: Tim Yardley <yardley@gmail.com> SVN-Revision: 35525
* openssl: security update to 1.0.1d to address CBC TLS issueTim Yardley2013-02-086-79/+15
| | | | | | | | | addressing CVE-2013-0169: 4th February 2013 Signed-off-by: Tim Yardley <yardley@gmail.com> SVN-Revision: 35524
* ar71xx: Routerboard 751 Mac Address Offset FixGabor Juhos2013-02-081-2/+10
| | | | | | | | | | | | | | | We utilize many Routerboard 751's and discovered that our latest batch of RB751's would not initialize the wireless radio. We have determined Mikrotik has changed where the mac address was located inside hardconfig. As such we utilize "routerboot_find_tag" to find the location of the mac address. We should remove "RB751_MAC_ADDRESS_OFFSET" as it is ambiguous by machine manufacturing date. The newer batch of RB751's that we received had a RB751_MAC_ADDRESS_OFFSET 0x10. Signed-off-by: Davey Hutchison <dhutchison@bluemesh.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35519
* generic: ar8216: simplify phy features setupGabor Juhos2013-02-081-11/+6
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35518
* generic: ar8216: don't use mdio bus specific functions in ar8216_id_chipGabor Juhos2013-02-081-8/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35517
* toolchain/eglibc: add support for 2.17Florian Fainelli2013-02-073-0/+11
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35515
* generic: ar8216: use inline function to convert swdev to ar8216Gabor Juhos2013-02-071-15/+19
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35514
* generic: ar8216: add mii_bus field to struct ar8216_privGabor Juhos2013-02-071-11/+12
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35513
* generic: mvswitch: add detach callbackGabor Juhos2013-02-071-1/+12
| | | | | | | | | | | Use the detach callback to disable packet mangling to avoid possible NULL pointer dereference. Compile tested only. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35512
* generic: ar8216: add detach callbackGabor Juhos2013-02-071-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code uses the 'remove' callback to disable packet mangle on the underlying ethernet device. However the attached_dev is always NULL when the 'remove' callback is called by phylib, and this causes NULL pointer dereference, like this: [ 475.300000] CPU 0 Unable to handle kernel paging request at virtual address 000000f0, epc == 801cdcf0, ra == 801c7eac [ 475.310000] Oops[#1]: [ 475.310000] Cpu 0 [ 475.310000] $ 0 : 00000000 00000000 00000000 00000001 [ 475.310000] $ 4 : 828dde00 00000005 828dde08 ffffffff [ 475.310000] $ 8 : 00380081 00380081 82902a40 00000001 [ 475.310000] $12 : 00000037 00370081 00000001 00000000 [ 475.310000] $16 : 82865000 828dde08 828dde00 00000001 [ 475.310000] $20 : 00000080 00460000 00000002 77151448 [ 475.310000] $24 : 00000000 801abfd4 [ 475.310000] $28 : 82cc2000 82cc3d58 0053c3c4 801c7eac [ 475.310000] Hi : 00000007 [ 475.310000] Lo : 00000004 [ 475.310000] epc : 801cdcf0 ar8216_remove+0x1c/0x94 [ 475.310000] Tainted: G O [ 475.310000] ra : 801c7eac phy_remove+0x4c/0x6c [ 475.310000] Status: 1000cc03 KERNEL EXL IE [ 475.310000] Cause : 00800008 [ 475.310000] BadVA : 000000f0 [ 475.310000] PrId : 00019750 (MIPS 74Kc) [ 475.310000] Modules linked in: ath79_wdt ledtrig_usbdev ledtrig_netdev ag71xx(-) nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ft p ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoext_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_co nntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpu dp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80 211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 475.310000] Process rmmod (pid: 1160, threadinfo=82cc2000, task=83969920, tls=7747c440) [ 475.310000] Stack : 828dde08 802f5004 802f4680 00000001 828ddf70 801c7eac 802f4680 801ad6d8 82902940 00000000 828dde08 802f5004 802f4680 801ad770 00000002 80269d94 00000000 00000001 00000080 828dde08 828dde3c 801ad7fc 82902940 00000000 83859100 00000000 8384dd2c 8384dd2c 828dde08 801ad230 82902800 00000000 00000000 001a0041 828dde08 828dde08 802e80e8 801aac44 00000080 00460000 ... [ 475.310000] Call Trace: [ 475.310000] [<801cdcf0>] ar8216_remove+0x1c/0x94 [ 475.310000] [<801c7eac>] phy_remove+0x4c/0x6c [ 475.310000] [<801ad770>] __device_release_driver+0x6c/0xd0 [ 475.310000] [<801ad7fc>] device_release_driver+0x28/0x40 [ 475.310000] [<801ad230>] bus_remove_device+0xd8/0x10c [ 475.310000] [<801aac44>] device_del+0x110/0x170 [ 475.310000] [<801aacb8>] device_unregister+0x14/0x28 [ 475.310000] [<801c92b0>] mdiobus_unregister+0x4c/0x70 [ 475.310000] [<82913060>] ag71xx_remove_ar8216_header+0xdc/0x5a8 [ag71xx] [ 475.310000] [ 475.310000] Code: 1200001c 8c82017c ac800128 <8c4500f0> 3c03ffdf 3463ffff 00a31824 ac4300f0 ac4000e0 Add a detach callback and disable packet mangling in that to fix the problem. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35511
* generic: add detach callback to struct phy_driverGabor Juhos2013-02-078-4/+112
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35510
* brcm47xx: fix name of kmod-ocf-ubsec-ssbHauke Mehrtens2013-02-061-1/+1
| | | | | | | | This also removes kmod-ocf, because kmod-crypto-ocf is automatically selected by kmod-ocf-ubsec-ssb. Thank you Manuel Munz <freifunk@somakoma.de> for the patch. SVN-Revision: 35509
* openvpn-easy-rsa: fix typo in version (#12958)Felix Fietkau2013-02-061-1/+1
| | | | SVN-Revision: 35508
* brcm47xx: bgmac: make it possible to set the devices into promisc mode when ↵Hauke Mehrtens2013-02-062-0/+206
| | | | | | | | it is already up This fixes #12927. SVN-Revision: 35507
* remove support for 3.6 kernelFlorian Fainelli2013-02-05117-14251/+0
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35506
* make default version 3.7.6Florian Fainelli2013-02-051-1/+1
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35505
* remove superfluous calls to /lib/brcm63xx.shFlorian Fainelli2013-02-053-6/+1
| | | | | | | | | | The first preinit script 03_do_brcm63xx.sh does the right job of exporting variables for the other subsequent preinit scripts to use them. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35504
* remove references to the old switch driverFlorian Fainelli2013-02-051-15/+0
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35503
* fix trx checksum after first boot and add led/button definitions for boards ↵Mirko Vogt2013-02-052-0/+12
| | | | | | RTA770BW and RTA770W SVN-Revision: 35501
* add support for board named RTA770WMirko Vogt2013-02-054-1/+215
| | | | | | | | | | Actually this board is the very same as the rta770bw, where the additional 'b' within the name just indicates 'Annex B'. The ADSL Modem itself is able to handle both, Annex A as well as Annex B - the loaded firmware makes the only difference SVN-Revision: 35500
* openvpn: remove the stale PKG_REV variableFelix Fietkau2013-02-051-1/+0
| | | | SVN-Revision: 35499
* openvpn: split easy-rsa into a separate package, it is no longer bundled ↵Felix Fietkau2013-02-054-25/+60
| | | | | | with the release tarball SVN-Revision: 35498
* generic: ar8216: clear driver specific data pointer in phy_deviceGabor Juhos2013-02-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is needed to avoid a NULL pointer dereference: [ 19.525270] Unable to handle kernel paging request for data at address 0x00000018 [ 19.532750] Faulting instruction address: 0xc016e104 [ 19.537714] Oops: Kernel access of bad area, sig: 11 [#1] [ 19.543102] P1010 RDB [ 19.545365] Modules linked in: booke_wdt nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat xt_nat d [ 19.590725] NIP: c016e104 LR: c0171490 CTR: 00000000 [ 19.595681] REGS: c4bc3c10 TRAP: 0300 Tainted: G W O (3.7.6) [ 19.602284] MSR: 00029000 <CE,EE,ME> CR: 82002022 XER: 20000000 [ 19.608381] DEAR: 00000018, ESR: 00000000 [ 19.612382] TASK = c4cd9c80[2070] 'ifconfig' THREAD: c4bc2000 GPR00: 00000001 c4bc3cc0 c4cd9c80 00000000 c7811000 00000000 00000000 0000e8ec GPR08: 0000e8eb 00000000 00029000 00000001 00000000 100801f8 1005c51c 1005c514 GPR16: 1005c468 1005c54c 1005c258 1005c530 10060000 00000000 c7811000 ffff8914 GPR24: c7815030 c793e400 10063adb 00000000 c7811000 c045594c c78ca600 c7815000 [ 19.646352] NIP [c016e104] register_switch+0x98/0x2d0 [ 19.651397] LR [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.656697] Call Trace: [ 19.659138] [c4bc3cc0] [c0170490] ar8216_mii_read+0x64/0xc4 (unreliable) [ 19.665835] [c4bc3d00] [c0171490] ar8216_config_init+0x2d8/0x3f4 [ 19.671835] [c4bc3d20] [c016cf8c] phy_init_hw+0x50/0x6c [ 19.677053] [c4bc3d30] [c016d078] phy_attach_direct+0xd0/0xf8 [ 19.682793] [c4bc3d50] [c016d154] phy_connect_direct+0x24/0x68 [ 19.688621] [c4bc3d70] [c0183b70] of_phy_connect+0x48/0x6c [ 19.694102] [c4bc3d90] [c0175aac] gfar_enet_open+0x254/0x3d8 [ 19.699755] [c4bc3db0] [c019acc4] __dev_open+0xc0/0x120 [ 19.704975] [c4bc3dd0] [c019af98] __dev_change_flags+0xd4/0x15c [ 19.710888] [c4bc3df0] [c019b0d4] dev_change_flags+0x1c/0x60 [ 19.716544] [c4bc3e10] [c01ebb94] devinet_ioctl+0x290/0x690 [ 19.722111] [c4bc3e70] [c01ec8d4] inet_ioctl+0x88/0xbc [ 19.727245] [c4bc3e80] [c0186b98] sock_ioctl+0x258/0x294 [ 19.732551] [c4bc3ea0] [c009c00c] do_vfs_ioctl+0x6a4/0x728 [ 19.738031] [c4bc3f10] [c009c0d4] sys_ioctl+0x44/0x70 [ 19.743077] [c4bc3f40] [c000c74c] ret_from_syscall+0x0/0x3c [ 19.748646] --- Exception: c01 at 0x48091b34 [ 19.748646] LR = 0x480e4b64 [ 19.756033] Instruction dump: [ 19.758991] 2f830000 907f0050 3860fff4 419e021c 837f0000 38000000 901f0038 901f0040 [ 19.766744] 901f003c 7f600034 5400d97e 0f000000 <801b0018> 2f800000 40be0010 801b001c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35497
* generic: ar8216: unregister switch on error pathGabor Juhos2013-02-051-4/+6
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35496
* mpc85xx: enable GPIO sysfs interfaceGabor Juhos2013-02-051-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35495
* mpc85xx: enable Freescale eSPI driver and m25p80 supportGabor Juhos2013-02-051-1/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35494
* mpc85xx: sync kernel configGabor Juhos2013-02-051-2/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35493
* brcm47xx: fix detection of Asus RT-N16Hauke Mehrtens2013-02-041-3/+4
| | | | | | This fixes #12936. SVN-Revision: 35492
* Add Failsafe support for Linksys E3000V1 / WRT610NV2Hauke Mehrtens2013-02-041-0/+1
| | | | | | | | | | | | | Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2 in /lib/preinit/05_init_interfaces_brcm. The list of devices will need to be expanded. Is there a way to determine the correct cpu_port to use in a generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if "/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists? Could a similar method be used in "/etc/init.d/netconfig"? Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> SVN-Revision: 35491
* brcm47xx: Fix switch config on 4716/53115 devicesHauke Mehrtens2013-02-041-1/+1
| | | | | | Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> SVN-Revision: 35490
* coldfire: R.I.P.Gabor Juhos2013-02-0459-91649/+0
| | | | | | | | | The target still uses 2.6.38. The support of that kernel version has been removed ~9 months ago. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35489
* leon: R.I.P.Gabor Juhos2013-02-0430-2249/+0
| | | | | | | | It is broken since ~9 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35488
* imx21: R.I.P.Gabor Juhos2013-02-048-626/+0
| | | | | | | | It is broken since ~22 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35487
* octeon: R.I.P.Gabor Juhos2013-02-0410-487/+0
| | | | | | | | It is broken since ~8 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35486
* omap35xx: R.I.P.Gabor Juhos2013-02-0434-35336/+0
| | | | | | | | It is broken since ~22 months and nobody takes care of that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35485
* firewall: various enhancementsJo-Philipp Wich2013-02-047-97/+133
| | | | | | | | | | | | - reduce mssfix related log spam (#10681) - separate src and dest terminal chains (#11453, #12945) - disable per-zone custom chains by default, they're rarely used Additionally introduce options "device", "subnet", "extra", "extra_src" and "extra_dest" to allow defining zones not related to uci interfaces, e.g. to match "ppp+" or any tcp traffic to and from a specific port. SVN-Revision: 35484
* bcm63xx: add support for linux 3.8Jonas Gorski2013-02-04112-0/+13610
| | | | | | | | Based on 3.8-rc6 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35482
* bcm63xx: add support for linux 3.7Jonas Gorski2013-02-04117-0/+14502
| | | | | | | | Based on 3.7.6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35481
* kernel: generic: update the ehci overcurrent patch to upstream submissionJonas Gorski2013-02-041-0/+40
| | | | | | | | Adds support for setting this in the generic platform driver's platform_data. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35480
* kernel: generic: add back the patch exporting bcm63xx tag headerJonas Gorski2013-02-046-4/+456
| | | | | | | | It went missing when adding linux 3.7 support. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35479
* kernel: generic: update to 3.8-rc6Jonas Gorski2013-02-0425-286/+200
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35478
* bcm63xx: refresh 3.6 patchesJonas Gorski2013-02-0439-84/+84
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35477
* kernel: update linux 3.7 to 3.7.6Gabor Juhos2013-02-0417-19/+19
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35476
* package/kernel: xt_NOTRACK has been removed in 3.7-rc1Gabor Juhos2013-02-041-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35475
* include/image.mk: export ubifs image from mkfs.ubifsLuka Perkov2013-02-031-0/+1
| | | | SVN-Revision: 35473
* odhcp6c: Fix timing issuesSteven Barth2013-02-031-2/+2
| | | | SVN-Revision: 35472
* libiwinfo: reset ioctl_socket fd in iwinfo_close(), fixes random failures ↵Jo-Philipp Wich2013-02-032-7/+9
| | | | | | with multiple cycles of iwinfo_finish() / iwinfo_backend() SVN-Revision: 35471
generated by cgit v1.1 at 2024-12-01 04:27:24 +0000