summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* atheros: add support for linux kernel v3.8Gabor Juhos2013-02-2113-0/+6528
| | | | | | | | | | | | | | | | | | | | | This builds and boots. Because of the function pointer indirection (e.g. mtd_info's read function pointer is assigned to spiflash_read), it is difficult for me to understand where the calls are coming from (could be anywhere, conditionally pointing at spiflash versions), so I punted and used the renamed function pointers (_erase, _read, _write). If someone knows better what to do, please fix. Cleaned up other sundry kernel tracking issues like get_phy_id and __devinit,etc. [juhosg: don't switch to that yet] Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35727
* linux/3.8: add missing config symbolsGabor Juhos2013-02-211-0/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35726
* bcm63xx: Fix sysupgrade for tag-version 7 and 8Jonas Gorski2013-02-211-1/+1
| | | | | | | | Fix sysupgrade for tag-version 7 and 8. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35724
* generic: b53: clear SM_SW_FWD_MODE unconditionally when enabling VLANJonas Gorski2013-02-211-4/+2
| | | | | | | | | | Setting this bit stops BCM53125 (bgmac actually) from receiving any packets. This bit is cleared conditionally in b53_switch_reset and it seems the same is done in bcmrobo.c which never sets that bit again. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35723
* generic: b53: remove empty spacesJonas Gorski2013-02-211-2/+2
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 35722
* ramips: print image build warnings/errors to stderrJonas Gorski2013-02-211-6/+6
| | | | | | | | Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35721
* cns21xx: print image build warnings/errors to stderrJonas Gorski2013-02-211-4/+4
| | | | | | | | Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35720
* ar71xx: print image build warnings/errors to stderrJonas Gorski2013-02-211-5/+5
| | | | | | | | Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35719
* scripts/symlink-tree.sh: print warnings/errors to stderrJonas Gorski2013-02-211-3/+3
| | | | | | | | Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35718
* scripts/ipkg: print warnings/errors to stderrJonas Gorski2013-02-211-16/+16
| | | | | | | | Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35717
* include/toplevel.mk: print warnings/errors to stderrJonas Gorski2013-02-211-1/+1
| | | | | | | | Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35716
* include/package-ipkg.mk: print warnings/errors to stderrJonas Gorski2013-02-211-1/+1
| | | | | | | | Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35715
* include/package-bin: print warnings/errors to stderrJonas Gorski2013-02-211-1/+1
| | | | | | | | Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35714
* include/kernel.mk: print warnings/errors to stderrJonas Gorski2013-02-211-3/+3
| | | | | | | | Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35713
* base-files: make firstboot ask for confirmationJonas Gorski2013-02-211-8/+16
| | | | | | | | To prevent accidential resets ask for confirmation (and default to n). Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35712
* mac80211: add missing DRIVER_11N_SUPPORT selectsJonas Gorski2013-02-211-3/+3
| | | | | | | | | Multiple drivers were missing their DRIVER_11N_SUPPORT despite supporting 11N capable cards. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35711
* busybox: remove two obsolete patchesJonas Gorski2013-02-218-91/+13
| | | | | | | | | | | They either work around missing implementations in uClibc 0.9.30 and earlier and add already present functionality. Closes #11210, #11211. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35710
* toolchain: uclibc: fix typo in uclibc common configJonas Gorski2013-02-211-1/+1
| | | | | | | | | | Based on a patch from Oliver Metz. Closes #10735. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35709
* mpc85xx: add kmod-leds-gpio to the default packagesGabor Juhos2013-02-211-1/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35708
* mpc85xx: disable a bunch of unused device nodes on the TL-WDR4900Gabor Juhos2013-02-211-1/+33
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35707
* package/kernel: add package for the Gianfar PTP driverGabor Juhos2013-02-201-0/+17
| | | | | | | | | | | | PTP for gianfar can be built as a module. Create a package for it. [juhosg: remove the mp85xx specific patch] Patchwork: http://patchwork.openwrt.org/patch/3344/ Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35706
* package/kernel: add package for the Freescale Gianfar driverGabor Juhos2013-02-201-0/+46
| | | | | | | | | | [juhosg: move the fsl-pq-mdio driver into a separate package] Patchwork: http://patchwork.openwrt.org/patch/3345/ Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35705
* brcm47xx: do not use vlan0 any more.Hauke Mehrtens2013-02-203-43/+43
| | | | | | | | The Broadcom switch driver says that vlan0 should not be used with any switch other than bcm5325. This makes OpenWrt always use vlan1 and vlan2 instead. SVN-Revision: 35704
* buildroot: allow specifying libc personality for external toolchainsJo-Philipp Wich2013-02-203-1/+16
| | | | SVN-Revision: 35703
* package/kernel: remove trailing whitespaces from *.mk filesGabor Juhos2013-02-207-9/+9
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35691
* mpc85xx: add kernel support for the TL-WDR4900 v1 boardGabor Juhos2013-02-202-0/+571
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35690
* mpc85xx: use a foreach loop to copy boot imagesGabor Juhos2013-02-201-1/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35689
* fix ARCH_SUFFIX for mips64{,el}r2Gabor Juhos2013-02-201-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35688
* ar71xx: remove __dev{init,exit} annotations from kernel filesGabor Juhos2013-02-1913-34/+34
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35687
* linux/3.8: add missing Kconfig symbolsGabor Juhos2013-02-191-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35686
* dante: fix broken configure script not using CFLAGS for conftestFlorian Fainelli2013-02-191-0/+3
| | | | | | | | Spotted by doing an ARM hard float build. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35685
* openssl: remove now obsolete cris/etrax patchFlorian Fainelli2013-02-191-13/+0
| | | | | | | | The etrax target has been removed in r34768. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35684
* libiconv: compile iconv stub with TARGET_CFLAGSFlorian Fainelli2013-02-191-1/+1
| | | | | | | | | Fixes spurious build issues when changing target CFLAGS for specific ABI options (such as ARM's floating point ABI). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35683
* mpc85xx: add default profileGabor Juhos2013-02-191-0/+16
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35677
* mpc85xx: add gpio-keys to OF match tableGabor Juhos2013-02-191-0/+10
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35676
* mpc85xx: enable squashfs featureGabor Juhos2013-02-192-1/+6
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35675
* mpc85xx: add swconfig to default packagesGabor Juhos2013-02-191-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35674
* 6relayd: Fix possible memory corruption issueSteven Barth2013-02-191-2/+2
| | | | SVN-Revision: 35673
* kernel: update linux 3.8-rcX to 3.8Gabor Juhos2013-02-1910-11/+15
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35672
* mac80211: b43: Increase number of RX DMA slotsHauke Mehrtens2013-02-181-0/+11
| | | | | | | | | | | | | | Bastian Bittorf reported that some of the silent freezes on a Linksys WRT54G were due to overflow of the RX DMA ring buffer, which was created with 64 slots. That finding reminded me that I was seeing similar crashed on a netbook, which also has a relatively slow processor. After increasing the number of slots to 128, runs on the netbook that previously failed now worked; however, I found that 109 slots had been used in one test. For that reason, the number of slots is being increased to 256. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> SVN-Revision: 35671
* 6relayd: Workaround potential signal handling issueSteven Barth2013-02-181-2/+2
| | | | SVN-Revision: 35665
* x86/rdc: migrate to common led helper functionsFlorian Fainelli2013-02-181-10/+8
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35664
* rb532: migrate platform to common led helper functionsFlorian Fainelli2013-02-181-10/+8
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35663
* cobalt: migrate platform to common led helper functionsFlorian Fainelli2013-02-181-15/+12
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35662
* brcm63xx: migrate platform to common led helper functionsFlorian Fainelli2013-02-181-49/+2
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35661
* au1000: migrate to common led helper functionsFlorian Fainelli2013-02-181-15/+11
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35660
* ar7: migrate to common led helper functionsFlorian Fainelli2013-02-181-33/+27
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35659
* ramips: migrate to common led helper functionsGabor Juhos2013-02-181-28/+4
| | | | | | | | | [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35652
* cns21xx: migrate to common led helper functionsGabor Juhos2013-02-181-28/+4
| | | | | | | | | [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35651
* ar71xx: migrate to common led helper functionsGabor Juhos2013-02-181-29/+5
| | | | | | | | | [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35650
generated by cgit v1.1 at 2024-12-28 03:02:11 +0000