summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: build firmware image for the WNDR3700 v4 boardGabor Juhos2014-04-122-4/+8
| | | | | | | | | Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40481
* ar71xx/image: allow to use more arguments for some macrosGabor Juhos2014-04-121-7/+7
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40480
* ar71xx: wndr4300: indicate WNDR3700v4 in the kernel support filesGabor Juhos2014-04-122-4/+4
| | | | | | | | | Apart from the wireless chip, the WNDR3700 v4 and the WNDR4300 is the same device. Indicate this in the kernel files. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40479
* ar71xx: wndr4300: enable 5V power for the USB portGabor Juhos2014-04-121-0/+9
| | | | | | | | | | | | | | The 5V power of the USB is controlled by a GPIO pin of the external WiFi chip. Setup the GPIO bitmasks in the platform data of the WiFi chip to ensure that the 5V power gets enabled by the ath9k driver. Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40478
* ar71xx: wndr4300: use KEY_RFKILL code for the Wireless buttonGabor Juhos2014-04-121-1/+1
| | | | | | | | | Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40477
* ar71xx: add default LED config for WiFi LEDs on the WNDR4300Gabor Juhos2014-04-121-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40476
* ar71xx: wndr4300: add LED for 2.4Ghz wifi interfaceGabor Juhos2014-04-121-0/+6
| | | | | | | | | Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40475
* ar71xx: wndr4300: select GPIO_OUT functionality for LED GPIOsGabor Juhos2014-04-121-0/+6
| | | | | | | | | The bootloader does not initializes the output function correctly for all LEDs. DO that from the board setup code. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40474
* ar71xx: wndr4300: change 'orange' to 'amber' in LED color namesGabor Juhos2014-04-122-9/+14
| | | | | | | | | | | | The hardware manual says amber so change the color part of the LED names to reflect that. Also update the constant names. Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40473
* ar71xx: fix typos in TP-Link rssileds definitionGabor Juhos2014-04-121-2/+2
| | | | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/5109/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40472
* ar71xx: add rssileds for Ubiquiti XM boardsGabor Juhos2014-04-121-0/+9
| | | | | | | | | | | Adds support for the received signal strength indicator LEDs of the Bullet M, Nanostation M and Rocket M devices. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/5108/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40471
* kernel: mark kmod-usb-phy-nop as hidden to avoid building it where it is not ↵Felix Fietkau2014-04-121-0/+1
| | | | | | | | needed Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40470
* hostapd: fix "bad number" error due to missing wps_pbc_in_m1 option (since ↵Felix Fietkau2014-04-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | r39995) r39995 introduced a new parameter wps_pbc_in_m1 to wifi wps config, but apparently did not provide a default value 0. When that option's non-existing value is later evaluated in /lib/netifd/hostapd.sh, it causes the "bad number" error to be logged in syslog if user has not set the wps_pbc_in_m1 option. The error materialises only if user has enabled wps. Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio1 (1254): sh: bad number Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio0 (1253): sh: bad number Discussion in bug 15508: https://dev.openwrt.org/ticket/15508#comment:3 Error is caused by line 282: https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/netifd.sh#L282 My patch sets the parameter's default value to 0, which does nothing. The default might also be set a bit later in the function, but this felt like the most clear place to do that. Signed-off-by hnyman <hannu.nyman@iki.fi> SVN-Revision: 40469
* x86/net5501: remove broken flagGabor Juhos2014-04-121-1/+0
| | | | | | | | | | According to Christophe, the kernel boots on the Soekris net5501 board. Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40468
* kernel: update 3.10 to 3.10.36Gabor Juhos2014-04-1234-64/+54
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40467
* ar71xx: fix image generationGabor Juhos2014-04-121-5/+5
| | | | | | | | | Move the comments out from the shell script to fix build breakage introduced in r40464. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40466
* ar71xx: avoid spurious restarts caused by the watchdog on AR934xGabor Juhos2014-04-122-1/+49
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40465
* ar71xx: add comments for image Makefile.Gabor Juhos2014-04-121-0/+50
| | | | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5075/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40464
* ar71xx: initial support for TP-Link Archer C7v2Gabor Juhos2014-04-122-2/+4
| | | | | | | | | | | | | | | | | | The C7v2 has 16 MB flash and QCA9880-BR4A rev 2 supported by ath10k driver. The C7v1 had 8 MB flash and the unsupported QCA9880-AR1A rev 1. Signed-off-by: Adam Serbinski <adam@serbinski.com> Patchwork: http://patchwork.openwrt.org/patch/5071/ [juhosg: - remove the v2 specific profile add the ath10k driver to the existing Archer C7 profile instead. Although on v1 devices it does not change the non-working behaviour, but the ath10k driver is useful for users whom have replaced the wifi card with a supported one in their units. - update image/Makefile to build firmware image for both boards if the Archer C7 profile is selected] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40463
* brcm2708: add missing configuration symbolsFlorian Fainelli2014-04-111-0/+3
| | | | | | | | Spotted by buildbot and while doing a CONFIG_ALL=y build. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 40462
* lantiq: add an extra partition to the TDW8970 flash that can be used to ↵John Crispin2014-04-111-1/+6
| | | | | | | | store the vdsl firmware Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40461
* lantiq: more vdsl related cleanupsJohn Crispin2014-04-114-16/+38
| | | | | | | | | | | * atm module needs to be loaded before linux-atm * use absolute firmware paths * extended validation * add a script for mounting an optional firmware partition Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40460
* netifd: switch to using git.openwrt.orgFelix Fietkau2014-04-111-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40459
* uci: fix import with not yet existing packages, preserve config permissions ↵Jo-Philipp Wich2014-04-111-3/+3
| | | | | | | | on commit, fix Lua detection in cmake Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 40458
* uhttpd: do not attempt to configure Lua handler if referenced file does not ↵Jo-Philipp Wich2014-04-111-3/+5
| | | | | | | | exist Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 40457
* netifd: update to latest version, adds a force_link parameter to bring up an ↵Felix Fietkau2014-04-111-2/+2
| | | | | | | | interface without active device carrier Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40456
* x86_64: add usb support (including storage) to the kernel configFelix Fietkau2014-04-111-0/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40455
* x86: set default kernel version to 3.10Felix Fietkau2014-04-1111-12/+2
| | | | | | | | | Place the previous selection (3.3.8) into the only subtarget that did not override it to 3.10 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40454
* x86: remove linux 3.8 supportFelix Fietkau2014-04-1110-1465/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40453
* generate esxi compatible vmdks, tooImre Kaloz2014-04-111-0/+4
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 40452
* reuqire qemu-img to be installed (the one we have in tools is too old)Imre Kaloz2014-04-111-0/+4
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 40451
* netifd: update to the latest version, fixes some reload issues with proto=staticFelix Fietkau2014-04-101-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40449
* kernel: add a dependency of kmod-r8169 on r8169-firmwareFelix Fietkau2014-04-101-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40448
* linux-firmware: add a new package for firmware (currently only builds r8169 ↵Felix Fietkau2014-04-101-0/+43
| | | | | | | | firmware) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40447
* build: add support for packing version control downloads with xzFelix Fietkau2014-04-101-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40446
* generic: remove obsolete symbol export from block2mtd init patchFelix Fietkau2014-04-104-40/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40445
* x86: try harder to attach block2mtd to fix boot issues on devices with ↵Felix Fietkau2014-04-1011-63/+422
| | | | | | | | longer delays Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40444
* netifd: fix a regression related to ppp + multiple updates (ipv4 + ipv6)Felix Fietkau2014-04-101-2/+2
| | | | | | | | Fixes #15504 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40443
* specify the adapter type for the vmdk conversionImre Kaloz2014-04-101-1/+1
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 40442
* mac80211: add back missing tx power handling fix (#12750)Felix Fietkau2014-04-103-4/+26
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40440
* lantiq: move the dsl-modem config to network.@dsl-modem[-1]John Crispin2014-04-103-6/+38
| | | | | | | | make sure uci_defaults generates a proper uci config for the v/adsl modem Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40439
* lantiq: vdsl init.d script should auto startJohn Crispin2014-04-091-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40438
* lantiq: cleanup vdsl driver bringupJohn Crispin2014-04-093-15/+161
| | | | | | | | | | | | | | | | config interface 'wan' # a, b, j option annex b # a, b, av, bv option tone b # vdsl.bin option firmware # atm, ptm option xfer_mode atm Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40437
* lantiq: make dsl_notify.sh executableJohn Crispin2014-04-091-0/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40436
* odhcpd: use correct defaults for interfaces not in UCISteven Barth2014-04-091-2/+2
| | | | SVN-Revision: 40435
* enable native KVM and VMware driversImre Kaloz2014-04-091-15/+48
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 40434
* upgrade to 3.14Imre Kaloz2014-04-092-2/+2
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 40433
* odhcp6c: fix recovering from status where all addresses have been lostSteven Barth2014-04-091-2/+2
| | | | SVN-Revision: 40432
* mac80211: fix warnings triggered by tx power changes when using WDS AP (#15491)Felix Fietkau2014-04-081-0/+21
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40430
* mac80211: fix user antenna gain calculationFelix Fietkau2014-04-081-15/+5
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40429
generated by cgit v1.1 at 2024-11-15 03:43:27 +0000