summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: fix network default config of the TEW-732BRJo-Philipp Wich2015-11-221-0/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47595
* ipq806x: fix a nasty stmmac data corruption bug caused by faulty DMA ↵Felix Fietkau2015-11-222-0/+78
| | | | | | | | initialization Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47594
* ipq806x: update stmmac to the version from linux 4.3Felix Fietkau2015-11-2217-1621/+6664
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47593
* ath10k-firmware: add board-2.bin for qca99x0Felix Fietkau2015-11-221-0/+14
| | | | | | | | | Keep board.bin as fallback for devices without OTP that load caldata from flash Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47592
* build: add support for choosing a different url filename part than the ↵Felix Fietkau2015-11-222-4/+9
| | | | | | | | output file Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47591
* base-files: use the correct path in case of modified preinit optionsFelix Fietkau2015-11-222-3/+3
| | | | | | | | | | | | | If the user sets any preinit options in .config, the wrong path may get applied due to wrong default value in image-config.in and due to Makefile writing also the unchanged options into 00_preinit.conf Modify the default path in image-config.in to match the current default path set by r47080. Also modify the fall-back default in Makefile. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47590
* linux: add support of Synopsys ARC770-based boardsFelix Fietkau2015-11-2220-0/+983
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
* kernel: mtd: Backport GD25Q128B support to 3.18Felix Fietkau2015-11-225-4/+19
| | | | | | | | | | | | Support is present in 3.19 and above as kernel commit: fcc87a95195236b0935183361a72e4a98bf577d8 Changes to other existing patches are a result of "make target/linux/refresh". Signed-off-by: Srdjan Rosic <srdjan.rosic@gmail.com> Signed-off-by: Srdjan Rosic <rosic@google.com> SVN-Revision: 47588
* usign: Revert r47582 "usign: activate format-security checks"Hauke Mehrtens2015-11-221-0/+1
| | | | | | | | | I accidentally deactivated it. This should be set to active it in any case independently what was set in the user config. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47587
* iperf: activate format-security checksHauke Mehrtens2015-11-222-1/+96
| | | | | | | | This patch was taken from debian. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47586
* gettext-full: activate format-security checksHauke Mehrtens2015-11-222-1/+59
| | | | | | | | This patch was taken from upstream libcroco Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47585
* gettext-full: update to version 0.19.6Hauke Mehrtens2015-11-227-9/+9
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47584
* px5g-standalone: activate format-security checksHauke Mehrtens2015-11-222-3/+2
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47583
* usign: activate format-security checksHauke Mehrtens2015-11-221-1/+0
| | | | | | | | This still compiles with format-security checks activated. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47582
* xfsprogs: activate format-security checksHauke Mehrtens2015-11-228-25/+38
| | | | | | | | This patch was taken from upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47581
* ramips: update dtsi files to support second spi deviceJohn Crispin2015-11-227-380/+143
| | | | | | Signed-off-by: Michael Lee <igvtee@gmail.com> SVN-Revision: 47580
* ramips: use transfer_one instead of transfer_one_message on rt2880 spiJohn Crispin2015-11-221-65/+62
| | | | | | | | | | | | * use kernel buildin transfer_one_message. we only need to implement transfer_one and set_cs function * should support use gpio as cs pin * deselected the spi device when setup and add debug info * only reset device when first driver probe Signed-off-by: Michael Lee <igvtee@gmail.com> SVN-Revision: 47579
* ramips: move rt2880 spi clock and reset init code to spi_prepare_messageJohn Crispin2015-11-221-68/+62
| | | | | | | | | | before spi transfer. use spi_prepare_message to setup spi hardware. it will setup MSB, spi mode and speed remove sys_freq member and speed check code Signed-off-by: Michael Lee <igvtee@gmail.com> SVN-Revision: 47578
* ramips: improve rt2880 spi setupJohn Crispin2015-11-221-11/+62
| | | | | | | | | | * check clock rate, SPI mode, and word sizes * setup spi polarity * enable spi1 hw if need Signed-off-by: Michael Lee <igvtee@gmail.com> SVN-Revision: 47577
* ramips: clean up rt2880 spi probe/removeJohn Crispin2015-11-221-25/+34
| | | | | | | | | | * fill struct according to the member order * add error clean up * set min/max spi speed. so we don't need to check again Signed-off-by: Michael Lee <igvtee@gmail.com> SVN-Revision: 47576
* ramips: improve rt2880 spi wait ready functionJohn Crispin2015-11-221-16/+15
| | | | | | | | | | | use loops_per_jiffy, spi clock speed and write bytes to get the spi loop count. if loop to 0 than spi operation timeout. remove usleep. we only write 1 byte to spi device. use busy loop would be better. Signed-off-by: Michael Lee <igvtee@gmail.com> SVN-Revision: 47575
* ramips: remove rt2880 spi lock and clean bit operationJohn Crispin2015-11-221-18/+5
| | | | | | Signed-off-by: Michael Lee <igvtee@gmail.com> SVN-Revision: 47574
* ramips: add rt2880/mt7620 spi register definesJohn Crispin2015-11-221-2/+63
| | | | | | Signed-off-by: Michael Lee <igvtee@gmail.com> SVN-Revision: 47573
* brcm2708: add device detection and use it for network, leds and preinitJohn Crispin2015-11-229-18/+110
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47572
* conntrack-tools: create /etc/conntrackd directoryJohn Crispin2015-11-211-0/+1
| | | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 47571
* conntrack-tools: use INSTALL_DIR onceJohn Crispin2015-11-211-2/+3
| | | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 47570
* tools/scons: update to 2.4.1John Crispin2015-11-211-2/+2
| | | | | | | | Update scons to 2.4.1. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47569
* tools/cmake: update to 3.4.0John Crispin2015-11-213-6/+6
| | | | | | | | | Update cmake to 3.4.0. Refresh patches. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47568
* kernel/generic: 3.18, 4.y: Add support for Quectel EC20 Mini PCIe moduleJohn Crispin2015-11-216-0/+660
| | | | | | | | | | | | | * both patches (qcserial/qmi_wwan) were submitted upstream[1,2] * build tested on 3.18 and 4.1 * run tested on imx6 platform with 4.1 1. http://article.gmane.org/gmane.linux.usb.general/132998 2. http://article.gmane.org/gmane.linux.usb.general/133113 Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47567
* lantiq: add phy led config support over devicetree bindingsJohn Crispin2015-11-212-2/+534
| | | | | | | | | | | This patch adds the posibility to config the led behaviour of the lantiq phys over the devicetree bindings.It patches the 0023-NET-PHY-adds-driver-for-lantiq-PHY11G for 3.18 and 4.1. I have also added a register description overview for applicable values. This goes to the documentation folder in the linux kernel. Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> SVN-Revision: 47566
* ralink: add missing nand layer hackJohn Crispin2015-11-211-0/+179
| | | | | | | | | | | | | | | | | It turned out that mtk_nand driver uses some sophisticated accounting and a general nand code must be patched. This patch adds required read and erase calls to a general nand code. I used a code for re6500 released by Linksys as a reference. All required operations (erase, write and read) are usable. However I found that jffs2 filesystem can be created only on top of a ubi volume. I tried to create jffs2 directly on mtd device but pages with clean markers are became uncorrectable. Signed-off-by: Kirill Berezin <fyiwdt@gmail.com> SVN-Revision: 47565
* kernel: fix building RTC driversJohn Crispin2015-11-211-8/+16
| | | | | | | | | | | All RTC drivers require the kernel to be built with CONFIG_RTC_CLASS=y. Set it accordingly. Tested only with DS1307. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> SVN-Revision: 47564
* lantiq: tweak DWC2 default parametersJohn Crispin2015-11-212-10/+10
| | | | | | | | | | | | | | | | | | | | | This patch improves the default configuration of DWC2 on lantiq SoCs somewhat: * Set maximum packet count to largest allowed value by the DWC2 (511) * Use 16-bit DMA bursts * Divide fifo buffers more evenly Default fifo buffer sizes from original ltq-hcd driver seem really irrational. For example according to DWC2 data book rxfifo size of 240 will not fit even a single full length USB packet. On the other hand non-periodic tx fifo size of 240 is more than enough to fit one complete packet. Change the sizes around to improve the situation and to fix some issues especially with isochronous USB transfers. Signed-off-by: Antti Seppälä <a.seppala@gmail.com> SVN-Revision: 47563
* brcm2708: enable hard float ABIJohn Crispin2015-11-213-4/+4
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47562
* brcm2708: add support for multi-device imagesJohn Crispin2015-11-213-44/+16
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47561
* brcm2708: rename image device definitionJohn Crispin2015-11-211-5/+5
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47560
* brcm2708: revert sd image extension to .imgJohn Crispin2015-11-211-2/+2
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47559
* brcm2708: simplify gzip image generationJohn Crispin2015-11-211-11/+1
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47558
* ramips: init usb power for Lenovo Y1SJohn Crispin2015-11-211-0/+21
| | | | | | Signed-off-by: Shonn Lu <countrysideboy@qq.com> SVN-Revision: 47557
* mac80211: fix autoprobing of mt7601u driverJohn Crispin2015-11-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Strigng passed to autoprobing script should match module's name. Currently that string is missing trailing "u". With that change mt7601u driver really gets autoloaded on USB Wi-Fi dongle insertion: ------------------>8--------------- [ 0.930000] hub 2-0:1.0: USB hub found [ 0.940000] hub 2-0:1.0: 1 port detected [ 1.150000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.720000] init: - preinit - Detected arc-sdp // Synopsys AXS101 Development Board [ 1.810000] random: mktemp urandom read with 3 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 4.940000] procd: - early - [ 5.540000] procd: - ubus - [ 6.550000] procd: - init - Please press Enter to activate this console. [ 7.160000] Loading modules backported from Linux version master-2015-10-26-0-g28c26cb [ 7.170000] Backport generated by backports.git backports-20150903-4-g12cf266 [ 7.200000] cfg80211: World regulatory domain updated: [ 7.230000] cfg80211: DFS Master region: unset [ 7.230000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 7.270000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 7.290000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7.290000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 7.310000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 7.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 7.330000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 7.470000] usb 1-1: reset high-speed USB device number 2 using ehci-platform [ 7.620000] mt7601u 1-1:1.0: ASIC revision: 76010001 MAC revision: 76010500 [ 7.630000] mt7601u 1-1:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____ [ 8.040000] mt7601u 1-1:1.0: Warning: unsupported EEPROM version 0d [ 8.050000] mt7601u 1-1:1.0: EEPROM ver:0d fae:00 [ 8.050000] mt7601u 1-1:1.0: EEPROM country region 01 (channels 1-13) [ 8.320000] usbcore: registered new interface driver mt7601u ------------------>8--------------- Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Dirk Neukirchen <dirkneukirchen@web.de> Cc: Felix Fietkau <nbd@openwrt.org> Cc: John Crispin <blogic@openwrt.org> SVN-Revision: 47556
* ar71xx: fix the SingleProfile kernel size limit for dLAN devicesJohn Crispin2015-11-211-2/+2
| | | | | | | | it ends up as $(2) of CatFiles and must be a plain decimal value. Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> SVN-Revision: 47555
* ar71xx: add support for the devolo dLAN HotspotJohn Crispin2015-11-2110-6/+162
| | | | | | Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> SVN-Revision: 47554
* ar71xx: fix AR71XX_MODEL on TP-Link TL-WR703NJohn Crispin2015-11-211-1/+1
| | | | | | | | | The hwid check was wrong, causing the AR71XX_MODEL value to end with a space (as $hwver was unset). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 47553
* oxnas: add missing platform bindings for stmmac glueJohn Crispin2015-11-211-0/+19
| | | | | | | | | | | r47218 was missing needed changes which were accidentally ommitted from the patch. This should fix #20878 Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 47552
* kernel: make kmod-usb-dwc2 depend on kmod-usb-gadget on omap targetHauke Mehrtens2015-11-211-1/+1
| | | | | | | | This dependency is missing for the omap target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47551
* kernel: fix build of kmod-dwc2Hauke Mehrtens2015-11-211-2/+4
| | | | | | | | dwc2_platform.koi is included in dwc2.ko with kernel 4.3. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47550
* kernel: add missing config optionHauke Mehrtens2015-11-211-0/+1
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47549
* ath10k: select kernel relayfs supportFelix Fietkau2015-11-211-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47548
* ipq806x: fix PCIe reset gpio handling - the core already handles the ↵Felix Fietkau2015-11-212-16/+60
| | | | | | | | active-low flag Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47547
* ipq806x: assert AHB PCIe reset during initFelix Fietkau2015-11-212-14/+36
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47546
generated by cgit v1.1 at 2024-11-06 17:45:37 +0000