summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* base-files: uci-defaults-new: remove reset/enable args of ucidef_add_switch()Jo-Philipp Wich2015-12-033-17/+18
| | | | | | | | | | | | | | | Out of 69 switch definitions, only 3 pass something different than "1" as values for reset and enable, with one of those three being invalid. This change ... * removes the reset and enable arguments from ucidef_add_switch() * unconditionally writes reset:1 and enable:1 to JSON * converts the three users of nonstandard values to ucidef_add_switch_attr() Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47720
* base-files: uci-defaults-new, config_generate: refactor code and drop old vlansJo-Philipp Wich2015-12-032-228/+157
| | | | | | | | | | | | | | | Remove support for now unused ucidef_add_switch_vlan(), move port->vlan and vlan->interfaces conversion to uci-defaults-new.sh and massively simplify config_generate. This change prepares the following upcoming steps: * Eliminate use of ucidef_set_interface_lan_wan() for switch only devices * Merge ucidef_add_switch() with ucidef_add_switch_ports() Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47719
* base-files: config_generate: add missing chunks of force tag supportJo-Philipp Wich2015-12-031-7/+9
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47718
* ramips: switch ucidef_add_switch_vlan() to ucidef_add_switch_ports()Jo-Philipp Wich2015-12-031-38/+41
| | | | | | | | | | This migrates the final board.d user of ucidef_add_switch_vlan() to the new ucidef_add_switch_ports() approach, fixing some logic errors for a few boards along the way. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47717
* kernel: backport support for m25p80 compatible="jedec,spi-nor" in DTFelix Fietkau2015-12-031-0/+39
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47716
* uClibc-ng: update to 1.0.9Felix Fietkau2015-12-032-3/+3
| | | | | | | | Update to 1.0.9, switch to XZ tarball. Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org> SVN-Revision: 47715
* kernel: add overlayfs stacking fix from upstreamFelix Fietkau2015-12-031-0/+33
| | | | | | | | | | | Overlayfs stacking was broken in 4.1.12 but now fixed in upstream branch. Stacking allows experimenting with configurations without the need to reset a device to factory config. Signed-off-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47714
* bcm53xx: move BCM5301X patches to use 08x prefixRafał Miłecki2015-12-032-0/+0
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47713
* mac80211: put the !LINUX_4_4 dependency in the right placeJonas Gorski2015-12-031-1/+2
| | | | | | | | Make sure all sub packages are marked as not building for 4.4. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47712
* bcm53xx: use backported versiions or R8000 & dt-bindings patchesRafał Miłecki2015-12-032-6/+11
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47711
* bcm53xx: fix typo in BCM5310X (patch name and subject)Rafał Miłecki2015-12-031-1/+1
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47710
* bcm53xx: move & update accepted USB patch for GPIO controlRafał Miłecki2015-12-031-5/+7
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47709
* bcm53xx: use backported BCM5301X patches from stblinux devicetree/nextRafał Miłecki2015-12-032-16/+38
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47708
* bcm53xx: use backported BCM5301X patches from stblinux soc/nextRafał Miłecki2015-12-032-0/+68
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47707
* bcm53xx: set vcc-gpio properties in one patchRafał Miłecki2015-12-032-35/+20
| | | | | | | | No reason to handle Buffalo WXR-1900DHP in separated patch. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47706
* bcm53xx: drop fixed clock from DTS for Buffalo WXR-1900DHPRafał Miłecki2015-12-033-9/+3
| | | | | | | | We don't use fixed clock in 4.4 (and 4.3) anymore. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47705
* bcm53xx: update linux 4.4 configRafał Miłecki2015-12-031-1/+11
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47704
* bcm53xx: add linux 4.4 supportRafał Miłecki2015-12-0336-0/+4925
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47703
* brcm63xx: add linux 4.4 supportJonas Gorski2015-12-02158-0/+16159
| | | | | | | | Only netboot tested. Flash at your own risk. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47702
* kernel: add linux 4.4 supportJonas Gorski2015-12-02181-0/+30191
| | | | | | | | Based on 4.4-rc3. Runtime tested on MIPS. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47701
* package: kernel: update dependencies for 4.4Jonas Gorski2015-12-029-18/+22
| | | | | | | | | Update dependencies for linux 4.4 and mark as broken where source code needs updating. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47700
* xtables-addons: update to 2.10Jonas Gorski2015-12-021-2/+2
| | | | | | | | Fixes compilation with linux 4.4. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47699
* kernel-version: drop 4.0 remnantsJonas Gorski2015-12-021-2/+0
| | | | | | | | We don't support 4.0 anymore and it is EOL anyway. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47698
* brcm63xx: Add NuCom R5010UNv2 supportJonas Gorski2015-12-029-0/+163
| | | | | | | | | | | | | | | | | This patch adds support for the NuCom R5010UNv2. It's a BCM6328 based board. It has an onboard BCM43217 wifi chip. For this wifi chip looks like the brcmsmac driver isn't still supported, b43 drivers are used for the profile of the router. It's worth mentioning this board was affected by a bug solved with https://dev.openwrt.org/changeset/46707 Tested-by: Angel Fontan <angel.fontan@gmail.com> Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47697
* brcm63xx: drop 3.18 supportJonas Gorski2015-12-02166-16711/+0
| | | | | | | | Drop 3.18 support; it will live on in CC. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47696
* ipq806x: ap148/r7500: fix eth0 for non gige speedsJonas Gorski2015-12-024-8/+24
| | | | | | | | | | | | | | Eth0 is attached to mac0 of the switch with a fixed link and and not to phy4 in single phy mode, so configuring it to anything but 1000FD will break the connection, which will happen if a only 100 Mbit capapble device is plugged into the wan port. Fix this by not taking the state from phy4 and just configuring a fixed link for eth0. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47695
* kernel: update 4.1 to 4.1.13Hauke Mehrtens2015-12-0293-1201/+334
| | | | | | | | | | | - two upstreamed patches removed - compile tested all targets using 4.1 - run tested ar71xx Signed-off-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47694
* mac80211: install new firmware for ath9k-htc on targetHauke Mehrtens2015-12-021-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For quite some time new firmware for ath9k-htc devices is available in http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/ath9k_htc/ Moreover ath9k-htc kernel driver expects this new v1.4 firmware to exist in /lib/firmware/ath9k_htc. What happens currently: ---------------------------->8-------------------------- [ 7.830000] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 7.840000] usb 1-1: Direct firmware load for ath9k_htc/htc_9271-1.4.0.fw failed with error -2 [ 7.850000] usb 1-1: Falling back to user helper [ 7.870000] usbcore: registered new interface driver ath9k_htc [ 7.880000] firmware ath9k_htc!htc_9271-1.4.0.fw: firmware_loading_store: map pages failed [ 7.890000] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested [ 8.200000] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 50980 [ 8.440000] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits [ 10.720000] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3 [ 10.740000] ath9k_htc 1-1:1.0: FW RMW support: Off [ 10.760000] ieee80211 phy0: Atheros AR9271 Rev:1 ---------------------------->8-------------------------- And with that patch new firmware is used instead: ---------------------------->8-------------------------- [ 33.920000] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 34.230000] usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 34.480000] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits [ 34.740000] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.4 [ 34.750000] ath9k_htc 1-1:1.0: FW RMW support: On ---------------------------->8-------------------------- Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47693
* bcm53xx: switch to ucidef_add_switch_ports()Jo-Philipp Wich2015-12-021-10/+10
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47692
* mpc85xx: fix up m25p80 device id (#21286)Felix Fietkau2015-12-021-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47691
* lantiq: fix up m25p80 device ids (#20975)Felix Fietkau2015-12-025-10/+5
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47690
* tools: make-ext4fs: explicitely request C collation for sortingJo-Philipp Wich2015-12-021-3/+3
| | | | | | | | | Do not rely on the system default collaction when sorting directory entries but explicitely request "C" collation. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47689
* bcm53xx: update PCIe driverHauke Mehrtens2015-12-0227-0/+4140
| | | | | | | | | This updates the iProc PCIe driver to the version currently submitted for kernel 4.5. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47688
* bcm53xx: update SMP patchesHauke Mehrtens2015-12-028-420/+836
| | | | | | | | | Broadcom submitted new SMP patches for this SoC to upstream Linux, add them to OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47687
* bcm53xx: activate workarounds for erratasHauke Mehrtens2015-12-026-25/+80
| | | | | | | | | | | This also deactivates some workaround for erratas only seen in older CPU cores and L2 cores not used in this SoC. This partly reverts commit r44947. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47686
* bcm53xx: move patch 132-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patchHauke Mehrtens2015-12-023-9/+2
| | | | | | | | | This patch is currently placed directly behind the SMP patches and has nothing to do with SMP, move it to an other position. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47685
* netifd: update to the latest version, fixes an issue with moving a wifi ↵Felix Fietkau2015-12-021-2/+2
| | | | | | | | iface to a different network Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47683
* brcm47xx: add Netgear WN2500RP supportRafał Miłecki2015-12-023-10/+32
| | | | | | | | We generate V1 image only for now. We lack buttons support for V2. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47682
* mpc85xx: fix typo added in r47676Jo-Philipp Wich2015-12-011-1/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47681
* mpc85xx: record board id and model name in /etc/board.jsonJo-Philipp Wich2015-11-301-0/+13
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47680
* base-files: uci-defaults-new, config_generate: allow force tagged cpu portsJo-Philipp Wich2015-11-302-5/+13
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47679
* mwlwifi: update to latest revision, fixes a kernel panicImre Kaloz2015-11-301-2/+2
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 47677
* mpc85xx: convert to ucidef_add_switch_ports()Jo-Philipp Wich2015-11-301-2/+2
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47676
* base-files: uci-defaults-new: only emit force_link for additional ifacesJo-Philipp Wich2015-11-301-1/+7
| | | | | | | | | Only se4t the force_link property for non-lan, non-wan ifaces as it is unnecessary in the default cases. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47675
* mvebu: switch network and led config defaults to board detection frameworkJo-Philipp Wich2015-11-303-11/+24
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47674
* base-files: uci-defaults-new: fix unquoted variablesJo-Philipp Wich2015-11-301-5/+5
| | | | | | | | | | Properly quote variables in ucidef_set_interface_lan() and ucidef_set_interface_lan(), otherwise interfaces with multiple devices are not properly written into the configuration. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47673
* ar71xx: record board id and model name in /etc/board.jsonJo-Philipp Wich2015-11-301-0/+13
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47672
* base-files: uci-defaults-new: add board id and name helpersJo-Philipp Wich2015-11-301-0/+12
| | | | | | | | | Add ucidef_set_board_id() and ucidef_set_model_name() procedures to store model information in the board.json file. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47671
* ramips: remove duplicate patchJohn Crispin2015-11-281-30/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47670
* procd: update to latest git HEADJohn Crispin2015-11-281-2/+2
| | | | | | | | this adds a lot of ujail cleanups Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47669
generated by cgit v1.1 at 2024-11-06 20:49:34 +0000