summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
...
* vlynq: small fixesMatteo Croce2008-04-021-1/+2
* Add routed support to br2684Florian Fainelli2008-04-023-1/+1037
* add proper email addresses to the comment headersMatteo Croce2008-04-027-7/+12
* Let authors holds copyright of the AR7 code (closes #2369)Matteo Croce2008-04-0214-20/+10
* vlynq: probe for an external clock first, needed to enable acx on the Leonard...Matteo Croce2008-04-021-9/+8
* brcm63xx image generation cleanups (#3169)Florian Fainelli2008-04-011-0/+5
* Fix bridge ioctls patchFlorian Fainelli2008-04-011-2/+0
* Upgrade fuse-2.7.1 to fuse-2.7.3 to fix breakage (#3246)Florian Fainelli2008-04-016-605/+359
* add a package for the udev vol_id utility (thx, fish)Felix Fietkau2008-04-011-0/+13
* fix dnsmasq compilation on some systemsFelix Fietkau2008-03-311-0/+1
* Add a generic Broadcom USB profile.Andy Boyett2008-03-311-0/+19
* Change WL500gP profile to use uhci-iv (#1589)Andy Boyett2008-03-311-2/+2
* Add support for the WL-500gP v2Andy Boyett2008-03-313-1/+19
* Add support for the ASUS WL-520gUAndy Boyett2008-03-312-4/+23
* broadcom-diag cleanupAndy Boyett2008-03-311-30/+32
* add frameburst closes #1759Travis Kemen2008-03-291-0/+2
* add target for PCEngines WRAP Signed-off-by: Roberto Riggio (roberto.riggio a...Travis Kemen2008-03-291-0/+16
* Fix format of depends clause for avr32 Signed-off-by: Robert P. J. Day <rpjda...Travis Kemen2008-03-291-1/+1
* Add support for the C19 revision of the ACX111 firmware (#3280)Florian Fainelli2008-03-292-14/+30
* fix wrong description nameTravis Kemen2008-03-291-1/+1
* add sdcard support for avr32 platformsTravis Kemen2008-03-291-0/+15
* generate images for the Infineon EASY 5120-RT boardsGabor Juhos2008-03-281-0/+5
* Fix the xt_physdev compilation (#3218)Florian Fainelli2008-03-272-2/+2
* Allow setting mac80211 interface into ad-hoc mode (#3247)Florian Fainelli2008-03-271-2/+7
* Create the kmod-spi package and load mmc_over_gpio after spi (#3273)Florian Fainelli2008-03-272-9/+18
* layer7 filtering module is now xt_layer7 (#3268)Florian Fainelli2008-03-271-0/+1
* Fix the watchdog path for the SCX200 watchdog driverFlorian Fainelli2008-03-271-1/+1
* Revert [10668] this was also accidentalFlorian Fainelli2008-03-271-33/+1
* Revert [10668] was accidentalFlorian Fainelli2008-03-272-5/+2
* Create a dummy sit package for 2.4 kernelsqFlorian Fainelli2008-03-275-4/+47
* Load xt_layer7 for 2.6 kernels (#3269)Florian Fainelli2008-03-271-0/+1
* This upgrades dnsmasq-2.40 to dnsmasq-2.41. Signed-off-by: Alexandros C. Coul...Travis Kemen2008-03-261-2/+2
* Add definitions for the Zyxel NBG-318SFlorian Fainelli2008-03-262-0/+14
* Generate a binary lzma-loaderFlorian Fainelli2008-03-262-3/+10
* ixp4xx/apex: Fixed another patch nameRod Whitby2008-03-261-0/+0
* ixp4xx/apex: Add support for fatslugs, and fix the patch namesRod Whitby2008-03-263-0/+28
* This patch fixes missing hwmon-vid module error on LM77 package build. hwmon-...Travis Kemen2008-03-251-7/+9
* The following patch enables txpower setting for hostap driver and restores tx...Travis Kemen2008-03-251-0/+160
* ixp4xx: Updated to 2.6.24.2 - tested on nas100d, fsg3 and nslu2Rod Whitby2008-03-251-1/+1
* apex: Create both 8MB and 16MB apex binariesRod Whitby2008-03-255-7/+362
* arm-magic.sh: added tw5334 machine idRod Whitby2008-03-251-1/+1
* ixp4xx/harddisk/config-default: Enable ext2 and disable ext3 extensionsRod Whitby2008-03-251-4/+1
* "make distclean" should remove "package/feeds" thanks to Robert P. J. DayRalph Hempel2008-03-241-1/+1
* Fix b44 phyaddr by applying the PHY-address mask. Closes #3712 - Adapted from...Andy Boyett2008-03-231-0/+15
* refresh patchesGabor Juhos2008-03-2219-114/+114
* Enable the default-on led triggerRod Whitby2008-03-222-0/+24
* generic-2.6/config-2.6.24: Added missing config entries to allow compilation ...Rod Whitby2008-03-221-0/+9
* add missing kernel config optionFelix Fietkau2008-03-211-0/+1
* ar7: fixed cpmac, now it doesn't fails to register the phy. Signed-off-by: be...Matteo Croce2008-03-211-0/+49
* mmc_over_gpio: Add initscript that will create a device Note that we should u...Michael Büsch2008-03-212-2/+30