summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* include: Do not alter KERNELRELEASE for external/git kernelsFlorian Fainelli2017-05-251-1/+6
| | | | | | | | | In case we use external and/or git cloned kernels, let the kernel determine the appropriate KERNELRELEASE. We cannot used LINUX_UNAME_VERSION because that one gets determined at a later time, when the kernel is already built proper. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* Revert "kernel: prevent addition of scm marker to localversion"Florian Fainelli2017-05-251-4/+0
| | | | | | | | | | This reverts commit 0df2c6563a3537ed21b28a9fb6874bf2718afd05 since it gets in the way of identifying properly which kernel we are running. This is particularly important if LEDE is using external kernels/git cloned kernels. We want to make sure we only load modules from that specific kernel. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* kernel: add kmod-usb-net-pl packageRoman Spychała2017-05-251-0/+13
| | | | | | Kernel support for Prolific PL-2301/2302/25A1 based cables Signed-off-by: Roman Spychała <roed@onet.eu>
* Make GBit switch work on RB2011René Mayrhofer2017-05-251-1/+2
| | | | | | | | | | | | | | | | | | | | | This change is required to make the GBit switch work on my Mikrotik Routerboard RB2011UiAS-RM, and I assume that the other RB2011 variants are exactly the same in terms of the switch. I have tested the board without and with the patch and confirm that the GBit ports are not supported at all (i.e. no communication works) with the current version in trunk and that everything works with the patch applied. The test box has been running for a few days with the patch applied, and does not show any performance problems in a test setting. I have not used it with LEDE in production so far, but with a previous turnk version of OpenWRT for many years - with the same patch applied. I therefore have good indication that it is stable. For the record, the switch chip on my test box is identified as switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0 The value 0x6f000000 has been taken from the table at https://wiki.openwrt.org/toh/mikrotik/rb2011uias with the previous discussion thread still online at https://lists.openwrt.org/pipermail/openwrt-devel/2014-December/029949.html. One definite improvement from the older OpenWRT trunk version I have been running in production and current LEDE trunk is that the SFP interface can be kept in the default configuration without excessive kernel messages about it constantly going up and down. I have not yet tested an actual SFP module, though. Performance seems to be reasonable. Routing between two GBit ports on that switch separated by different VLANs with the default firewall ruleset (and one additional rule two allow traffic between the VLANs), but without NAT, iperf3 results are: [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 508 MBytes 426 Mbits/sec 102 sender [ 4] 0.00-10.00 sec 506 MBytes 425 Mbits/sec receiver With a connection going through NAT (also 2 ports on the same GBit switch, same ruleset, but NAT active), routing performance drops to around 250 MBit/s. (Note that RouterOS achieves beyond 900 MBit/s on the same hardware with the default rule set and the FastTrack rule active even for NAT, see https://wiki.mikrotik.com/index.php?title=Manual:IP/Fasttrack and http://www.mikrotik.com/download/share/FastTrack.pdf). Summarizing, I strongly recommend to apply this patch in trunk, so that the GBit switch chip rev. 4 can be supported upstream in the next LEDE release (hopefully soon). Signed-off-by: René Mayrhofer <rene@mayrhofer.eu.org>
* ar71xx: change image version for ubiquiti devicesMatthias Fritzsche2017-05-251-3/+3
| | | | | | | | | | changes the image version from hardcoded OpenWrt to $VERSION_DIST. AirOS shows a notification with the image version during a firmware upgrade. fixes #582 Signed-off-by: Matthias Fritzsche <txt.file@txtfile.eu>
* lldpd: bump to 0.9.7Stijn Tintel2017-05-241-2/+2
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* samba: fix CVE-2017-7494Stijn Tintel2017-05-242-4/+33
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* brcm2708: enable cpufreqStijn Tintel2017-05-233-8/+42
| | | | | | | | | | | | | With cpufreq disabled, the CPU stays locked at the frequency set by the bootloader. This severely degrades performance as the bootloader sets the CPU at the lowest frequency by default. Enable cpufreq for all subtargets and use the ondemand governor. Tested bcm2708 on RPi0W. Tested bcm2709 and bcm2710 on RPi3. Reported-by: Bryan Mayland <bmayland@capnbry.net> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* dnsmasq: bump to 2.77rc5Hans Dedecker2017-05-221-3/+3
| | | | | | | | | | | | | Some small tweaks and improvements : 9828ab1 Fix compiler warning. f77700a Fix compiler warning. 0fbd980 Fix compiler warning. 43cdf1c Remove automatic IDN support when building i18n. ff19b1a Fix &/&& confusion. 2aaea18 Add .gitattributes to substitute VERSION on export. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* 6rd: add 6rd specific settings as nested json objectHans Dedecker2017-05-222-3/+7
| | | | | | Add 6rd specific settings prefix, relay-prefix as a nested data json object Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: update to git HEAD versionHans Dedecker2017-05-221-3/+3
| | | | | | | | | | | 7573880 system-linux: parse 6rd specific settings as nested json data object a063705 system-linux: remove redundant check for strtoul() return value e6ebe0b build: disable unknown warning option error in clang 08d8f47 interface: add new "ifup-failed" hotplug event 20a1bac bridge: reset primary only after marking the member not present 6b9c267 build: suppress format truncation warnings to avoid errors with gcc7 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* umdns: update to the version 2017-05-22Rafał Miłecki2017-05-221-3/+3
| | | | | | | | | | | | | | | | This includes following changes: 0e8b948 Support specifying instance name in JSON file 49fdb9f Support PTR queries for a specific service 26ce7dc Allow filtering with instance name in service_reply 920c62a Store instance name in the struct service ff09d9a Rename service_name function to the service_instance_name 64f78f1 Rename mdns_hostname variable to the umdns_host_label Previous package update pulled commit 70c66fbbcde86 ("Fix sending replies to PTR questions") which introduced a regression which this update fixes. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* fstools: update to the latest versionFelix Fietkau2017-05-221-3/+3
| | | | | | | | | 88d48d5 libfstools: silence mkfs.{ext4,f2fs} a19f2b3 build: disable the format-truncation warning error to fix gcc 7 build errors 633a8d0 libfstools: fix multiple volume_identify usages with the same volume c43ae11 fstools: use -Wno-format-truncation instead of -Wno-error=format-truncation Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libunwind: update to 1.2Yousong Zhou2017-05-223-19/+58
| | | | | | | | | | | Addresses CVE-2015-3239: Off-by-one error in the dwarf_to_unw_regnum function in include/dwarf_i.h in libunwind 1.1 allows local users to have unspecified impact via invalid dwarf opcodes. Upstream stable-v1.2 fixed the missing unwind_i.h issue but no new tarball is released yet Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* dropbear: bump to 2017.75Kevin Darbyshire-Bryant2017-05-212-17/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Security: Fix double-free in server TCP listener cleanup A double-free in the server could be triggered by an authenticated user if dropbear is running with -a (Allow connections to forwarded ports from any host) This could potentially allow arbitrary code execution as root by an authenticated user. Affects versions 2013.56 to 2016.74. Thanks to Mark Shepard for reporting the crash. CVE-2017-9078 https://secure.ucc.asn.au/hg/dropbear/rev/c8114a48837c - Security: Fix information disclosure with ~/.ssh/authorized_keys symlink. Dropbear parsed authorized_keys as root, even if it were a symlink. The fix is to switch to user permissions when opening authorized_keys A user could symlink their ~/.ssh/authorized_keys to a root-owned file they couldn't normally read. If they managed to get that file to contain valid authorized_keys with command= options it might be possible to read other contents of that file. This information disclosure is to an already authenticated user. Thanks to Jann Horn of Google Project Zero for reporting this. CVE-2017-9079 https://secure.ucc.asn.au/hg/dropbear/rev/0d889b068123 Refresh patches, rework 100-pubkey_path.patch to work with new authorized_keys validation. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* mac80211: add support for rtl8821ae pcie adapterHans Ulli Kroll2017-05-211-2/+22
| | | | | | | | | Add support for Realtek RTL8821AE/RTL8812AE PCIe adapter. This device supports 802.11ac and bluetooth testet on PC Engines APU with AP and STA mode Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
* linux-firmware: add firmware for rtl8821ae supportHans Ulli Kroll2017-05-211-0/+8
| | | | | | Add needed firmware to support rtl8821ae pcie adapter Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
* lantiq: spi: double time out toleranceHauke Mehrtens2017-05-211-0/+37
| | | | | | | | | | | | | | | | | | | The generic SPI code calculates how long the issued transfer would take and adds 100ms in addition to the timeout as tolerance. On my 500 MHz Lantiq Mips SoC I am getting timeouts from the SPI like this when the system boots up: m25p80 spi32766.4: SPI transfer timed out blk_update_request: I/O error, dev mtdblock3, sector 2 SQUASHFS error: squashfs_read_data failed to read block 0x6e After increasing the tolerance for the timeout to 200ms I haven't seen these SPI transfer time outs any more. The Lantiq SPI driver in use here has an extra work queue in between, which gets triggered when the controller send the last word and the hardware FIFOs used for reading and writing are only 8 words long. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: update kernel 4.9 to 4.9.29Koen Vandeputte2017-05-2171-1089/+149
| | | | | | | | | | | | | - Refresh all patches - Removed upstreamed - Adapted 1 Compile tested on: bcm53xx, cns3xxx, imx6, lantiq Run tested on: cns3xxx & imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [update from 4.9.28 to 4.9.29] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: update kernel 4.4 to version 4.4.69Kevin Darbyshire-Bryant2017-05-2125-430/+145
| | | | | | | | | | | | | | | | | | | Refresh patches. A number of patches have landed upstream & hence are no longer required locally: 062-[1-6]-MIPS-* series 042-0004-mtd-bcm47xxpart-fix-parsing-first-block Reintroduced lantiq/patches-4.4/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup as it was incorrectly included upstream thus dropped from LEDE. As it has now been reverted upstream it needs to be included again for LEDE. Run tested ar71xx Archer C7 v2 and lantiq. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> [update from 4.4.68 to 4.4.69] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bcm53xx: add support for TP-LINK Archer C5 V2Rafał Miłecki2017-05-215-3/+71
| | | | | | | | This model also contains few partitions non-discoverable partitions we need to "protect". Othen than that it uses non-deprecated serial entry in DTS that doesn't work with LEDE so we need to workaround it as well. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: fix default procd reloadAlexandru Ardelean2017-05-201-1/+1
| | | | | | | | | | | | | | | | | | Bug introduced with 6713694. I did not count on procd handling reload as mentioned in this doc: https://wiki.openwrt.org/inbox/procd-init-scripts ``` procd_set_param file /var/etc/your_service.conf # /etc/init.d/your_service reload will restart the daemon if these files have changed procd_set_param netdev dev # likewise, except if dev's ifindex changes. procd_set_param data name=value ... # likewise, except if this data changes. ``` The service would be restarted regardless of any of those params. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* kernel: enable CRASH_DUMP on supported platformsDaniel Golle2017-05-201-0/+10
| | | | | | | While we have CRASHLOG on MIPS it makes sense to support 'classic' kexec-based CRASH_DUMP on x86 and arm platforms. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* Revert "ar71xx: Add support for Teltonika RUT900"John Crispin2017-05-1811-525/+1
| | | | | | | | This reverts commit 224e5f5efa22b8a0132522367afd3b22f05d53e1. pepe2k pointed out that this was not ready to merge Signed-off-by: John Crispin <john@phrozen.org>
* ramips: support jumbo frame on mt7621 up to 2kMichael Lee2017-05-184-17/+32
| | | | Signed-off-by: Michael Lee <igvtee@gmail.com>
* ar71xx: Add support for Teltonika RUT900Steffen Weinreich2017-05-1811-1/+525
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Teltonika RUT900 is a Router with LTE dual SIM, WiFi, 4x Ethernet ports, I/O, RS232, RS485, GPS. The device ist based on a Atheros AR9344 rev 3, Specifications: - 560/450/225 MHz (CPU/DDR/AHB) - 128 MB of RAM - 16 MB of FLASH - Serial Console header on a Card Board edge connector - 4x 10/100 Mbps Ethernet (3x LAN, 1x WAN) - 2.4 GHz Wifi - 2x external, detachable Wifi antennas - LTE Modem Huawei ME909u-521 (Also other Modem seen) - 2x LTE antennas - 1x GPS antenna - 7x LED, 1x button - 1x USB Connector - 1x Serial RS232 - 1x Serial RS485 - 1x MicroSD Card The GPL sources of the device are available at www.teltonika.lt/gpl/ and are based on OpenWRT Barrier Breaker (14.07) Running from tftp: The Router starts into the uboot Webupdater if the Button ist pressed more than 3 seconds, if no Network cable is attached it starts the uboot serial console, from there the router loads the firmware image via tftpboot from 192.168.1.2:firmware.bin (the router has the 192.168.1.1). With bootm the loaded image will be booted. Signed-off-by: Steffen Weinreich <steve@weinreich.org>
* f2fs-tools: Switch to gz tarballDaniel Engberg2017-05-181-3/+3
| | | | | | At some point kernel.org decided to drop xz generated tarballs, switch to gz which they still provide. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* mac80211: rt2x00: remove unneccessary codeDaniel Golle2017-05-181-0/+134
| | | | | | | | Use chanreg and dccal helpers to reduce the size of ePA code. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: fixed white-space so patch applies]
* lldpd: drop specific respawn params [use system-wide]Alexandru Ardelean2017-05-181-3/+0
| | | | | | | I think I added these respawn params [a while back], when I did the conversion to procd init script format. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* elfutils: bump to 0.169Luiz Angelo Daros de Luca2017-05-186-241/+271
| | | | | | | | Removed patches (now upstream): - 004-maybe-uninitialized.patch - 007-fix_TEMP_FAILURE_RETRY.patch Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* ath10k-ct-firmware: Add support for QCA9886/QCA9888 firmware.Ben Greear2017-05-181-0/+36
| | | | | | | | | This firmware shoul have the same general feature set as the rest of the 10.4 CT firmware (9984, 9980, etc). Build-tested only in LEDE, but firmware has been tested with ath10k-ct driver on other OSs, so likely works just fine. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct-firmware: Update to latest.Ben Greear2017-05-181-8/+8
| | | | | | | | | | | The 988x and 9887 firmwares include a bugfix for a case where blockack did not work sometimes, and many fixes for compiler warnings detected by newer gcc compilers. The 9980 and 9984 firmware includes a large backport of upstream QCA firmware changes to bring it up to date. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Update to latest ath10k-ct driver.Ben Greear2017-05-181-3/+3
| | | | | | | | | | | | | Supports disabling firmware hex logging that many found too verbose. Increase BMI timer so system works more often with 9888 Compex NIC (and maybe others). Allow configuring a specific board-file per NIC using fwcfg file. Maybe fix a scan-busy problem when using CT firmware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* devel/trace-cmd: Update to 2.6.1Daniel Engberg2017-05-181-7/+4
| | | | | | | Update trace-cmd to version 2.6.1 Switch to tarball download Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* comgt-3g: enable modem before to setpinGiuseppe Lippolis2017-05-182-1/+2
| | | | | | some modems needs to be enabled with CFUN=1 before to set the pin Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* kernel: add hwmon for W83627EHF and familyPhilip Prindeville2017-05-172-0/+49
| | | | | | | | Remove support for NCT6775/6 from W83627EHF driver so the NCT6775 driver will still be used for those chips. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* dnsmasq: add IPv6 nameserver configuration in server modeArjen de Korte2017-05-162-1/+11
| | | | | | | | | | | When in ra server mode, configure nameservers passed in router announcements from the dns value (which is already used by odhcpd). This also fixes FS#677 by using the global IPv6 address of the router instead of the link local address (if no nameservers are configured). Signed-off-by: Arjen de Korte <build+lede@de-korte.org> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* libs/libnftnl: Update to 1.0.7Daniel Engberg2017-05-161-3/+3
| | | | | | Update libnftnl to 1.0.7 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* network/utils/curl: Update to 7.54.0Daniel Engberg2017-05-163-16/+16
| | | | | | | Update curl to 7.54.0 Update and fresh patches Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* devel/strace: Update to 4.16Daniel Engberg2017-05-162-3/+3
| | | | | | | Update strace to 4.16 Refresh patch Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* network/utils/ipset: Update to 6.32Daniel Engberg2017-05-161-2/+2
| | | | | | Update ipset to 6.32 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* uhttpd: Enable integrated Lua by defaultAnsuel Smith2017-05-162-4/+17
| | | | | | We enabled lua interpreter by default as it doesn't make any problem in the uhttpd config file and we modify the index page to use it. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: add Digi Edgeport USB serial driver packageBjørn Mork2017-05-161-0/+39
| | | | Signed-off-by: Bjørn Mork <bjorn@mork.no>
* ar71xx: add support for Aerohive AP-121Chris Blake2017-05-1511-3/+197
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for Aerohive AP-121 access point. Specification: - SoC: Atheros AR9344-BC2A at 560MHz - WiFi 1: 2.4GHz Atheros AR9340? - SoC - WiFi 2: 5.0GHz Atheros AR9382-AL1A - Memory: 128MB from 2x Nanya NT5TU32M16DG-AC - SPI: 1MB Macronix MX25L8006E - NAND: 128MB Hynix H27U1G8F2BTR-BC - Ethernet: Atheros AR8035-A - USB: 1x 2.0 - TPM: Atmel SC3204 Flashing: 1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a password of administrator or AhNf?d@ta06 if prompted. 2. Once in U-Boot, download and flash LEDE factory image over tftp: dhcp; setenv serverip tftp-server-ip; tftpboot 0x81000000 lede-ar71xx-nand-hiveap-121-squashfs-factory.bin; nand erase 0x800000 0x800000; nand write 0x81000000 0x800000 0x800000; reset; Signed-off-by: Chris Blake <chrisrblake93@gmail.com> [minor text changes in commit subject and description, fixed alphabetical order in etc/diag.sh, use only model name in lib/ar71xx.sh, fixed code style issues in mach-hiveap-121.c, ubinized factory image] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for 8devices RambutanMantas Pucka2017-05-151-0/+4
| | | | Signed-off-by: Mantas Pucka <mantas@8devices.com>
* ar71xx: add support for 8devices Rambutan development boardMantas Pucka2017-05-1511-0/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rambutan is a Wifi module based on QCA9550/9557 http://www.8devices.com/products/rambutan This commit adds basic support for Rambutan development kit Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of DDR2 RAM - 128 MB of NAND Flash - 1x 100Mbps Ethernet - 1x 1000Mbps Ethernet (PHY on dev-kit) - 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz - 2x U.FL connectors on module, chip antennas on dev-kit - 1x miniPCIe slot - 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header Flash instructions: Stock firmware is OpenWrt, so use: sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar or upgarde from GUI (don't save config) Use factory image to flash from U-Boot: tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi nand erase.part ubi nand write 80060000 ubi ${filesize} Signed-off-by: Mantas Pucka <mantas@8devices.com> [split support in uboot-envtools package into a separate commit, fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for UniFi-AC-MeshLudwig Thomeczek2017-05-155-8/+13
| | | | | | | | | | | | | | | | | | | This adds the build option for the new UniFi AC Mesh. It is a direct hardware copy from the AC Lite. - SoC: QCA9563-AL3A (775Mhz) - RAM: 128MiB - Flash: 16MiB - dual firmware partitions! - LAN: 1 1000M - POE - Wireless: 2.4G: QCA9563 5G: UniFi Chip, QCA988X compatible Thanks to Frank Dietz for testing. Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net> [wrapped too long lines in mach-ubnt-unifiac.c] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: move Zbtlink ZBT-WE1526 to generic build targetPiotr Dymacz2017-05-153-7/+12
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ramips: add om-watchdog to rut5xx DEVICE_PACKAGESSteffen Weinreich2017-05-151-0/+1
| | | | | | Add om-watchdog as default package for rut5xx. Signed-off-by: Steffen Weinreich <steve@weinreich.org>
* om-watchdog: add support for Teltonika RUT5xx (ramips)Steffen Weinreich2017-05-152-1/+10
| | | | | | | | | | | Add rut5xx GPIO PIN selection to om-package startup script. Testet on a RUT500 device, the timeout value of the hardware watchdog is about 280 sec. Signed-off-by: Steffen Weinreich <steve@weinreich.org> [split into two commits, bump PKG_RELEASE] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
generated by cgit v1.1 at 2024-12-18 22:42:11 +0000