summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positionsJohn Crispin2015-03-151-0/+1
| | | | | | | | | | While the switch positions aren't explicitly labeled as on and off, we've heard complaints about them being wrong. This patch changes the handling to match the stock firmware. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 44795
* ipq806x: fix AP148 boot from NORJohn Crispin2015-03-152-0/+38
| | | | | | | | | | | | | | | | This patch allows AP148 to boot from NOR flash. As we're using a FIT image as kernel (which includes kernel bin + DTB) we enable the MTD_SPLIT_FIT_FW kernel option, which will detect the FIT image and automatically split the "firmware" partition into 2 MTD parts (kernel + rootfs). The rootfs will then be parsed and split between rootfs + rootfs_data, as usual. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 44794
* ipq806x: add ap148 bootargs to DTJohn Crispin2015-03-151-0/+46
| | | | | | | | | Only one bootargs is really needed: the tty port. All the other information will use the OpenWrt mechanisms. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 44793
* kernel: mtdsplit: add support for FIT imageJohn Crispin2015-03-154-0/+147
| | | | | | | | | | | If this option is enabled, the FIT image format will be detected and split by the mtdsplit code. Detection is based upon the FDT magic, which will trigger the parsing and detection of the rootfs, ending-up in the creation of the 2 new partitions. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 44792
* Fix (invert/revert) Hornet-UB WPS LED stateJohn Crispin2015-03-151-1/+1
| | | | | | | | | | | | | | | My previous patch regarding the Hornet-UB board (commit: beed4d82d6a0154b0cd5f7b84e2180215ace6718) actually causes the WPS led state to be inverted. Practically this meant that value 0 in /sys/class/led/alfa:blue:wps/brightness would turn the LED on and any positive value (1-255) would turn it off. The above of course is confusing and hence reverting this value back to the way it was before beed4d82d6a0154b0cd5f7b84e2180215ace6718. Signed-off-by: Janne Cederberg <janne.cederberg@gmail.com> SVN-Revision: 44791
* mac80211: add missing dependency for brcmfmac with SDIO support enabled ↵Felix Fietkau2015-03-151-1/+1
| | | | | | | | (fixes #19184) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44790
* netifd: dhcp: install host route to gateway (#19182)Jo-Philipp Wich2015-03-152-1/+2
| | | | | | | | | Certain DHCP servers push a gateway outside of the assigned interface subnet, to support those situations install a host route towards the gateway. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44789
* b53: global config is part of the management page, not the control pageJonas Gorski2015-03-151-2/+2
| | | | | | | | | | It will now actually enable the mib counters instead of enabling rx/tx for the first switch port. Reported-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44788
* brcm63xx: brcm63xxpart: fix buffer overrun in of parserJonas Gorski2015-03-152-14/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We never account for the added partitions from the tag parser, so allocated two partioness less than needed. This can cause issues when the memory gets reused before the mtd code can actually add the partitions. Fixes oopses like: [ 0.920000] mtd: device 2 (rootfs) set to be root filesystem [ 0.924000] 1 squashfs-split partitions found on MTD device rootfs [ 0.932000] 0x0000002e0000-0x0000003f0000 : "rootfs_data" [ 0.940000] 0x000000010000-0x0000003f0000 : "linux" [ 0.948000] CPU 0 Unable to handle kernel paging request at virtual address 00010203, epc == 8028ddf8, ra == 801ad5d4 [ 0.956000] Oops[#1]: [ 0.956000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.8 #22 [ 0.956000] task: 8181da78 ti: 8181e000 task.ti: 8181e000 [ 0.956000] $ 0 : 00000000 10008f00 00010203 81049e40 [ 0.956000] $ 4 : 00010203 000000d0 00000000 000000fd [ 0.956000] $ 8 : 00000000 80015490 00000000 80370000 [ 0.956000] $12 : 00000000 00000001 00000000 2f736269 [ 0.956000] $16 : 00010203 000000d0 8007bde0 81482000 [ 0.956000] $20 : 00000000 00000004 81481f80 803c4b78 [ 0.956000] $24 : 00000000 00000000 [ 0.956000] $28 : 8181e000 8181fbe8 80b20000 801ad5d4 [ 0.956000] Hi : 00000000 [ 0.956000] Lo : 00000000 [ 0.956000] epc : 8028ddf8 strlen+0x4/0x20 [ 0.956000] Not tainted [ 0.956000] ra : 801ad5d4 kstrdup+0x30/0x84 [ 0.956000] Status: 10008f03 KERNEL EXL IE [ 0.956000] Cause : 00800008 [ 0.956000] BadVA : 00010203 [ 0.956000] PrId : 0002a010 (Broadcom BMIPS4350) [ 0.956000] Modules linked in: [ 0.956000] Process swapper/0 (pid: 1, threadinfo=8181e000, task=8181da78, tls=00000000) [ 0.956000] Stack : 8148aa00 803c4bcc 00000000 801cd9d0 00000000 8148a400 818a1400 003f0000 81482000 8007bde0 8148aa00 800ac78c 8148aa00 00000004 8037ae30 8181fc4c 8148aa00 803bc074 803c0000 80074b84 00000000 00010000 00000004 ffffffff 8037ae30 00000004 8148aa00 00000004 803c4b80 818a1400 803c0000 00000005 81481f80 80074ce0 8181fc84 00000005 81879800 8008ece4 00000000 003f0000 ... [ 0.956000] Call Trace: [ 0.956000] [<8028ddf8>] strlen+0x4/0x20 [ 0.956000] [<801ad5d4>] kstrdup+0x30/0x84 [ 0.956000] [<8007bde0>] allocate_partition+0x58/0x93c [ 0.956000] [<80074ce0>] add_mtd_partitions+0x90/0x144 [ 0.956000] [<801cc228>] mtd_device_parse_register+0x78/0xcc [ 0.956000] [<801e7870>] of_flash_probe+0x658/0x728 [ 0.956000] [<80216ee0>] platform_drv_probe+0x24/0x60 [ 0.956000] [<801221f4>] driver_probe_device+0xcc/0x214 [ 0.956000] [<800466f8>] __driver_attach+0x7c/0xb4 [ 0.956000] [<800c38bc>] bus_for_each_dev+0x94/0xa4 [ 0.956000] [<800c35e4>] bus_add_driver+0x104/0x1ec [ 0.956000] [<80122400>] driver_register+0xac/0x100 [ 0.956000] [<80113a5c>] do_one_initcall+0x148/0x204 [ 0.956000] [<803cbd1c>] kernel_init_freeable+0x168/0x220 [ 0.956000] [<800157bc>] kernel_init+0x10/0x114 [ 0.956000] [<800108a8>] ret_from_kernel_thread+0x14/0x1c [ 0.956000] [ 0.956000] Code: 03e00008 27bd0028 00801021 <80430000> 10600003 00000000 080a377e 24420001 03e00008 [ 1.192000] ---[ end trace 9d89ccbcae27fe40 ]--- [ 1.200000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.200000] [ 1.200000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44787
* modules: add depenency on usb-gadget for dwc2 also on brcm63xxJonas Gorski2015-03-151-1/+1
| | | | | | | | Bcm63xx supports usb gadget, so dwc2 will default do dual mode. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44786
* brcm63xx: kmod-bcm63xx-udc: fix module path for 3.18+Jonas Gorski2015-03-151-1/+3
| | | | | | | | Fix the module path for linux 3.18+. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44785
* brcm63xx: fix 6368 cpu1 reg typoJonas Gorski2015-03-151-1/+1
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44784
* toolchain: remove leftovers from old llvm-gcc experimentsFelix Fietkau2015-03-156-89/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44783
* scripts/feeds: add support for uninstalling targetsFelix Fietkau2015-03-151-0/+22
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44782
* scripts/feeds: add support for installing targetsFelix Fietkau2015-03-151-0/+57
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44781
* scripts/metadata.pm: save target makefile namesFelix Fietkau2015-03-151-0/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44780
* scripts/feeds: get rid of redundant feed cache copyFelix Fietkau2015-03-151-8/+6
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44779
* scripts/feeds: remove useless install_method abstractionFelix Fietkau2015-03-151-18/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44778
* scripts/feeds: add support for searching for targetsFelix Fietkau2015-03-151-1/+44
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44777
* scripts/metadata.pl: move parse_target_metadata() to metadata.pmFelix Fietkau2015-03-152-86/+87
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44776
* scripts/feeds: scan for target metadataFelix Fietkau2015-03-151-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44775
* build: use different grep strings for scanning package vs target metadataFelix Fietkau2015-03-151-1/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44774
* scripts/feeds: remove a few trailing tabsFelix Fietkau2015-03-151-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44773
* uhttpd: make generating SSL keys more reliable against interrupted bootsFelix Fietkau2015-03-151-2/+5
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44772
* lantiq: add a better fix to strip FCS from ethernet packets on XRX200Felix Fietkau2015-03-151-0/+25
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44771
* ltq-vdsl-fw: fix md5sum for new firmwareFelix Fietkau2015-03-151-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44770
* lantiq: enable atm-esi by default for xrx200Felix Fietkau2015-03-151-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44769
* ath9k: disable TPC support for now until bugs have been found and fixedFelix Fietkau2015-03-151-0/+22
| | | | SVN-Revision: 44768
* ltq-vdsl-fw: update firmware cutter URL for newer Speedport firmware (fixes ↵Felix Fietkau2015-03-152-4/+4
| | | | | | | | #19160) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44767
* toolchain: r44701 accidentially removed the uclibc default when ↵John Crispin2015-03-151-0/+1
| | | | | | | | TOOLCHAINOPTS is set Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44766
* kernel: enable open by fhandle syscallsJohn Crispin2015-03-151-0/+6
| | | | | | | | | | | | | | | | | | | | This is needed by many services to function properly and as all modern distributions got it enabled, it starts to be a de-facto standard, i.e. user-space starts to silently depend on it. This also pulls in EXPORTFS, however, the kernel binary size increases only a little. On ARM systems comes down to 800 bytes uncompressed and about 200 bytes compressed size. On MIPS systems it's about 1.2 kB size increase of the LZMA compressed kernel. v2: use menuconfig option instead of just enabling the option Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 44765
* brcm2708: fix mkdosfs command line options orderFelix Fietkau2015-03-151-2/+2
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44764
* dosfstools: fix build on OS XFelix Fietkau2015-03-151-0/+1849
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44763
* dosfstools: update to v3.0.27Felix Fietkau2015-03-151-7/+15
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44762
* scripts: fix ubinize-image on OS XFelix Fietkau2015-03-151-2/+5
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44761
* patch: bump GNU patch to 2.7.5Felix Fietkau2015-03-151-3/+3
| | | | | | | | | Bump GNU patch in tools from 2.7.1 to 2.7.5. Change download URL to use @GNU alias. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 44760
* x86: refresh kernel configFelix Fietkau2015-03-152-17/+23
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44759
* x86: update to kernel 3.18Felix Fietkau2015-03-1512-1/+1502
| | | | | | | | | | | | | | copied target/linux/x86/config-3.14 and target/linux/x86/patches-3.14 to 3.18 equivalents and then tweaked until it built. Tested on alix2, soekris net4826 and soekris net4521. Still having trouble with net4826 booting from Grub, alix2 and net4521 are fine. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 44758
* kernel: fix portability issues of the x86 vdso2c utilityFelix Fietkau2015-03-151-0/+13
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44757
* kernel: add missing config symbol for 3.18+Felix Fietkau2015-03-153-0/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44756
* bcm53xx: support NVRAM prefixes with extra / in devpathRafał Miłecki2015-03-141-5/+9
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44755
* ath9k: always select relay support, not just when debugfs is enabled - fixes ↵Felix Fietkau2015-03-141-2/+1
| | | | | | | | an unresolved symbol error Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44754
* x86: disable rts/cts for serial console in grub - fixes net48xx boot issuesFelix Fietkau2015-03-141-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44753
* grub2: fix processing the serial rts/cts optionFelix Fietkau2015-03-141-0/+14
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44752
* kernel: linux 3.19 also needs the network namespace related fd export patch ↵Felix Fietkau2015-03-141-0/+21
| | | | | | | | (#19161) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44751
* ath: fix selecting the module individually (#19162)Felix Fietkau2015-03-141-0/+10
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44750
* mac80211: fix a rounding issue in minstrel MCS rate duration calculationFelix Fietkau2015-03-141-0/+43
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44749
* mac80211: improve powersave handling in the tx queue rework patchFelix Fietkau2015-03-142-9/+154
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44748
* dnsmasq: enable pxe-prompt, pxe-service config optionsJohn Crispin2015-03-131-1/+6
| | | | | | | | | | | | DNSMASQ has the ability to provide a menu to a pxeboot system, using the --pxe-prompt and --pxe-service configuration options. The current init.d script converting the "dhcp" file to "dnsmasq.conf" does not find these options, but they are supported. This patch thus enables the options. Signed-off-by: Derek LaHousse <dlahouss@mtu.edu> SVN-Revision: 44747
* BusyBox: Netcat 1.10 compatibility require server optionJohn Crispin2015-03-132-3/+4
| | | | | | | | | | | Netcat 1.10 compatibility require server options 1.10 compatibility without server option produce error "NO OPT l!" and completely not function Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com> SVN-Revision: 44746
generated by cgit v1.1 at 2024-07-06 11:13:36 +0000