summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: Support for Mikrotik RB2011UiASGabor Juhos2014-07-134-1/+32
| | | | | | | | | | | | | | | | | | | | | The RB2011UiAS is almost exactly the same as the RB2011UAS, which is already supported. Hardware-wise, it adds a passive power injector on Eth10. Software-wise, Routerboot passes a different board name on the kernel command line. Hence the need for a patch. Not yet working: * touchscreen: doesn't work on RB2011UAS either. The touchscreen itself seems to be driven by an ADS7843-compatible IC, but figuring out which GPIO pins it's connected to is work for the future. * control of power injector: remains off. Probably also GPIO-controlled. Signed-off-by: Soren Harward <stharward@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5841/ [juhosg: rename and refresh the kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41617
* ar71xx: select correct Kconfig symbol in the Mikrotik SXT Lite patchGabor Juhos2014-07-131-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41616
* ar71xx: refresh patchesGabor Juhos2014-07-1312-36/+33
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41615
* kernel: sort Kconfig options in kernel configsGabor Juhos2014-07-1314-20/+20
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41614
* base-files: adjust the default netfilter tcp established connection timeout ↵Felix Fietkau2014-07-131-1/+1
| | | | | | | | as per RFC 5382 (#17098) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41599
* ar71xx: add support for TP-LINK TL-WA860RE v1John Crispin2014-07-138-0/+107
| | | | | | | | | | | | | | | | New router/repeater from TP-LINK - CPU: Atheros AR9341-DL3A (AP123) - Flash: 4MB - Ram: 32MB Similar to TL-WA850RE. Changes: rename file after r41596 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 41598
* lantiq: configure uboot-envtools on BTHOMEHUBV2B and make it work correctly ↵John Crispin2014-07-131-1/+4
| | | | | | | | | | | | | | on other lantiq boards Generate the configuration file for uboot-envtools on BTHOMEHUBV2B. Adds the specific parameters for the BTHOMEHUBV2B and also fixes an incorrect path which would have affected other lantiq boards as well (currently only the GIGASX76X). Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41597
* ar71xx: added support for TL-WA830RE V2John Crispin2014-07-1310-1/+189
| | | | | | | | Corrected patch ath79 insted of auth79. Sorry. Signed-off-by: Fredrik Jonson <fredrik@famjonson.se> SVN-Revision: 41596
* b43-tools: b43-fwsquash.py: manually remove LP-PHY 16 supportHauke Mehrtens2014-07-121-3/+3
| | | | | | | | | | I have never seen a LP-PHY with core rev 16 or higher, but the ucode will be included, because we need LP-PHY 13 and 15 and N-PHY core rev 16. Comment out the code for now. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 41595
* brcm47xx: deactivate ssb and old phy code for new devicesHauke Mehrtens2014-07-124-5/+26
| | | | | | | | | This deactivates ssb and G-PHY code in b43 for the mips74k profile in brcm47xx. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 41594
* mac80211: b43: backport b43 patches from wireless testingHauke Mehrtens2014-07-126-24/+2542
| | | | | | | | This brings b43 up to wireless-testing/master master-2014-07-10 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 41593
* b43-tools: b43-fwsquash.py: add new firmware filesHauke Mehrtens2014-07-121-15/+42
| | | | | | | | | This adds support for new firmware files from b43 and selects the ucode based on the PHY type now. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 41592
* brcm63xx: update irq affinity code to latest versionJonas Gorski2014-07-1220-128/+170
| | | | | | | | Reduces code size a bit and sets affinity to boot cpu by default. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41591
* brcm63xx: base-files: order board names alphabeticallyJonas Gorski2014-07-123-60/+60
| | | | | | | | Restore alphatetical order in uci-defaults scripts and brcm63xx.sh Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41590
* brcm63xx: Use leds script for Huawei HG556a and improve profileJonas Gorski2014-07-122-4/+8
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41589
* brcm63xx: Fix HW553 supportJonas Gorski2014-07-1268-125/+130
| | | | | | | | | | | | | | | - adsl and lan leds are swapped. - internetkey is labeled as hspa. - enable status led and reset button for failsafe. - use new leds script. - fix switch configuration. - remove enet0 from board_info. - add profile. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41588
* brcm63xx: Use model name for Comtrend AR-5381uJonas Gorski2014-07-126-14/+15
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41587
* brcm63xx: Use model name for Comtrend AR-5387unJonas Gorski2014-07-126-20/+21
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41586
* brcm63xx: Use model name for ADB P.DG A4001N1Jonas Gorski2014-07-1211-39/+42
| | | | | | | | | This patch also makes use of the new leds script. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41585
* ramips: add support for WR8305RT boardJohn Crispin2014-07-129-1/+137
| | | | | | | Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41584
* brcm2708: Use uci-defaults for network configJohn Crispin2014-07-122-13/+15
| | | | | | | | By using uci-defaults force_link is enabled, which fixes some link issues if ethernet cable isn't connected when LAN is initialized. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 41583
* kernel: update 3.14 to 3.14.12Luka Perkov2014-07-113-4/+4
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 41582
* kernel: remove 3.12 support since none of the targets is using itLuka Perkov2014-07-10176-35425/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 41581
* imagebuilder: x86 fails to build inside the imagebuilderJohn Crispin2014-07-101-1/+4
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41580
* ramips: add support for Zbtlink WA05 routerJohn Crispin2014-07-106-2/+126
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41579
* imx6: put kernel and dtb into rootfs by defaultJohn Crispin2014-07-101-3/+3
| | | | | | | | this will make the rc1 images boot with the default config. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41578
* ar8216: disable EEE by default on AR8327 to fix stability issues (#14597)Felix Fietkau2014-07-102-0/+12
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41577
* toolchain: switch back to uClibc for octeon, it actually works nowFelix Fietkau2014-07-101-1/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41576
* octeon: fix edgerouter pro ethernet device probe orderFelix Fietkau2014-07-101-0/+34
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41575
* target/linux/*: more dead package cleanupsJohn Crispin2014-07-102-2/+2
| | | | | | | | found 2 more Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41574
* uClibc: fix copy&pasted typo in the stat fixFelix Fietkau2014-07-101-9/+9
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41573
* octeon: add basic board detection for UBNT EdgeRouter PROFelix Fietkau2014-07-101-0/+31
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41572
* target/linux/*: more dead package cleanupsJohn Crispin2014-07-108-9/+9
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41571
* uClibc: add a whole bunch of mips64 related fixesFelix Fietkau2014-07-1012-10/+1004
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41570
* gcc: backport a fix for issues with accessing weak data referencesFelix Fietkau2014-07-101-0/+42
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41569
* octeon: backport a few upstream fixesFelix Fietkau2014-07-104-0/+319
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41568
* lantiq: generate /tmp/sysinfo/lantiq_board_name if missingJohn Crispin2014-07-101-0/+2
| | | | | | | | | | | Run lantiq_board_detect from lantiq_board_name and lantiq_board_model. This was the one thing missing from r41474 for sysupgrade board detection to work properly. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41567
* lantiq: enable SysupgradeNAND for BTHOMEHUBV2BJohn Crispin2014-07-101-0/+10
| | | | | | | | | | | | | | | | | Enables SysupgradeNAND for BTHOMEHUBV2B. Depends on the following patches: http://patchwork.openwrt.org/patch/5817/ http://patchwork.openwrt.org/patch/5848/ http://patchwork.openwrt.org/patch/5851/ Many thanks everyone for your help the last couple of days. Ben Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41566
* lantiq xway: disable gluebi and enable ubiblockJohn Crispin2014-07-101-2/+2
| | | | | | | | | | | | Disables gluebi and enables ubiblock on lantiq xway. Squashfs images on nand use ubifs instead of jffs2 for the overlay. I'll leave the equivalent patch for xrx200 to someone who has a board to test. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41565
* procd: correctly identify ubifs in tar fileJohn Crispin2014-07-101-2/+2
| | | | | | | | | | | A missing path prevents the rootfs type contained in a SysupgradeNAND tar file from being determined correctly. This fixes it, and also corrects a minor spelling mistake. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41564
* sysupgrade: Enable killing of all processes under upgradedJohn Crispin2014-07-101-12/+27
| | | | | | | | | | If the sysupgrade scripts is called under upgraded, it will not kill all other processes as it should to avoid interference by locked filesystem. This patch checks the parent and if it is upgraded, it kills all. Signed-off-by: André Valentin <avalentin@marcant.net> SVN-Revision: 41563
* ar71xx: nbg6716: extract ath10k wifi board.binJohn Crispin2014-07-101-0/+23
| | | | | | | | | | With help of this script the ath10k board.bin settings are loaded from flash and saved to the ath10k firmware directory. The driver reads it later in the boot process. Signed-off-by: André Valentin <avalentin@marcant.net> SVN-Revision: 41562
* ralink: wpa does not exist, use wpad-mini insteadJohn Crispin2014-07-101-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41561
* target/linux/*: kmod-fs-ext{2,3} RIPJohn Crispin2014-07-1011-14/+10
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41560
* toolchain: only default eglibc for octeon and not all of mips64John Crispin2014-07-103-6/+6
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41559
* firewall: fix segfault introduced by latest updateJo-Philipp Wich2014-07-101-2/+2
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 41558
* mac80211: Fix config variable name for dtim_periodFelix Fietkau2014-07-101-1/+1
| | | | | | | | | | | | The vif option dtim_period was accidently renamed dtim_interval in r38988 ("netifd: add wireless configuration support and port mac80211 to the new framework"). This is wrong and makes the dtim_period/dtim_interval a dead option because the rest of the config generation code still uses dtim_period. Reported-by: Jeppe Ledet-Pedersen <jlp@steinwurf.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> SVN-Revision: 41557
* firewall: fix regressions introduced after latest ubus reworkJo-Philipp Wich2014-07-101-2/+2
| | | | | | | | | | The commit 92281eb747b56e748b7c3d754055919c23befdd4 broke fw3_ubus_addresses() so that no addresses where returned at all, this caused fw3 to not emit NAT reflection rules anymore. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 41556
* enable handling of the wan led on the WRT1900ACImre Kaloz2014-07-101-1/+1
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 41555
* kernel: revert an upstream linux-stable commit that is causing usb ↵Felix Fietkau2014-07-091-0/+206
| | | | | | | | regressions on some brcm47xx and ar71xx devices Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41554
generated by cgit v1.1 at 2024-12-12 04:54:29 +0000