summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeFilesLines
* ar71xx: wpe72: set active_low flag for the reset buttonGabor Juhos2014-01-261-0/+1
* ar71xx: wp543: set active_low flag for the buttonsGabor Juhos2014-01-261-0/+2
* kernel: update 3.10 to 3.10.28Gabor Juhos2014-01-2647-203/+159
* ar71xx: image: reserve 4 erase blocks on the TP-Link devicesGabor Juhos2014-01-251-0/+6
* firmware-utils/mktplinkfw: allow to reserve space in the generated imagesGabor Juhos2014-01-251-4/+17
* ar71xx: archer c7: define LEDs connected to the AR8327 switchGabor Juhos2014-01-251-0/+10
* ar71xx: image: move WNDAP360 macroGabor Juhos2014-01-251-3/+1
* kernel/3.8: update pci_disable_usb_common_quirks patchGabor Juhos2014-01-251-12/+12
* ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boardsGabor Juhos2014-01-241-0/+6
* ar71xx: image: generate sysupgrade images for the Compex boardsGabor Juhos2014-01-241-2/+4
* ar71xx: add sysupgrade support for the Compex boardsGabor Juhos2014-01-241-1/+24
* ar71xx: image: use a single firmware partition on Compex devicesGabor Juhos2014-01-241-4/+10
* ar71xx: enable MTD_SPLIT_LZMA_FW optionGabor Juhos2014-01-241-0/+1
* kernel/3.1x: add split code for LZMA compressed kernel based firmwaresGabor Juhos2014-01-249-4/+171
* config: lxc: enable KERNEL_POSIX_MQUEUELuka Perkov2014-01-241-1/+1
* ar71xx: image: detect partition sizes in the Image/Build/Ath macroGabor Juhos2014-01-241-27/+30
* ar71xx: image: fix size verification in the CatFiles macroGabor Juhos2014-01-241-5/+13
* Revert "kernel: create firmware partition from MyLoader partition parser"Gabor Juhos2014-01-241-13/+2
* uboot-envtools: add support for wndr3700Luka Perkov2014-01-242-4/+5
* ar71xx: ap83: define mtd layout via command lineGabor Juhos2014-01-232-1/+46
* ar71xx: ap81: define mtd layout via command lineGabor Juhos2014-01-232-1/+51
* ar71xx: image: show size limit in warning messagesGabor Juhos2014-01-231-2/+2
* ar71xx: add initramfs image support for Compex devicesGabor Juhos2014-01-231-0/+11
* ar71xx: wp543: use KEY_RESET code for the sw4 buttonGabor Juhos2014-01-231-1/+1
* ar71xx: create wndr3700 network config from uci-defaultsLuka Perkov2014-01-233-97/+40
* base-files: add ucidef_add_switch_port functionLuka Perkov2014-01-232-1/+11
* odhcpd: fix certain config values being overwrittenSteven Barth2014-01-231-2/+2
* 6rd: Make don't fragment bit (df) a configurable variableSteven Barth2014-01-231-2/+4
* kernel/3.10: update pci_disable_usb_common_quirks patchGabor Juhos2014-01-231-12/+12
* mpc85xx: Fix building ramdisk imagesGabor Juhos2014-01-231-6/+2
* mpc85xx: Remove inittab workaroundGabor Juhos2014-01-232-29/+0
* ubox: revert log buffer size changesJohn Crispin2014-01-222-26/+7
* ubox: update to latest git headJohn Crispin2014-01-211-2/+2
* brcm63xx: enable support for BCM63268Florian Fainelli2014-01-211-1/+1
* brcm63xx: add support for BCM963269BHR boardFlorian Fainelli2014-01-212-2/+90
* brcm63xx: improve BCM63268 supportFlorian Fainelli2014-01-212-10/+65
* ar71xx: mynet-n750: define LEDs connected to the AR8327 switchGabor Juhos2014-01-211-0/+15
* modules: swconfig.c: update the error path on 3.13, and behave nicely with re...Zoltan Herpai2014-01-211-3/+2
* modules: update swconfig.c to compile on 3.13 (compile-tested)Zoltan Herpai2014-01-211-0/+8
* add missing symbolsZoltan Herpai2014-01-211-0/+2
* kernel: ocf: add missing dependency for hifn driverJonas Gorski2014-01-211-1/+1
* lantiq: fix unaligned access in vdsl firmware extractorJohn Crispin2014-01-211-13/+14
* add missing symbolsZoltan Herpai2014-01-211-0/+6
* b53: use drvdata to store driver dataHauke Mehrtens2014-01-203-10/+6
* b53: make b53_switch_reset_gpio() staticHauke Mehrtens2014-01-201-1/+1
* procd: update to latest git headJohn Crispin2014-01-201-2/+2
* netifd: don't add unnecessary NOP policy rulesSteven Barth2014-01-201-2/+2
* update ocf patches - as ENT_DEBUG is removed, move the messages into pr_noticeZoltan Herpai2014-01-201-2/+2
* update/fixup overlayfs patchImre Kaloz2014-01-201-11/+12
* add initial 3.13 supportImre Kaloz2014-01-20169-0/+32779