summaryrefslogtreecommitdiff
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: brcmfmac: backport CYW89342 support & fixes from 4.20Rafał Miłecki2018-09-124-0/+208
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kmod-sched-cake: fix 6in4/gso performance issueKevin Darbyshire-Bryant2018-09-121-3/+3
| | | | | | | | Bump to latest upstream cake: Add workaround for wrong skb->mac_len values after splitting GSO Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mac80211: add iw command wrapper with error loggingRafał Miłecki2018-09-101-0/+4
| | | | | | | | | | | | | | | | | | | | | Currently it's close to impossible to tell what part of mac80211 setup went wrong. Errors logged into system log look like this: radio0 (6155): command failed: No error information (-524) radio0 (6155): command failed: Not supported (-95) radio0 (6155): command failed: I/O error (-5) radio0 (6155): command failed: Too many open files in system (-23) With this commit change it's getting clear: command failed: No error information (-524) Failed command: iw dev wlan0 del command failed: Not supported (-95) Failed command: iw phy phy0 set antenna_gain 0 command failed: I/O error (-5) Failed command: iw phy phy0 set distance 0 command failed: Too many open files in system (-23) Failed command: iw phy phy0 interface add wlan0 type __ap Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: backport upstream fixesKoen Vandeputte2018-09-0714-8/+679
| | | | | | | | | | Backport most significant upstream fixes (excl. hwsim fixes) Refreshed all patches. Contains important fixes for CSA (Channel Switch Announcement) and A-MSDU frames. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kmod-sched-cake: bump to 20180827Kevin Darbyshire-Bryant2018-08-311-3/+3
| | | | | | | Expand filter flow mapping to include hosts as well Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit d14ffdc307d36bd9abe908b46ff7baece54c9551)
* ath10k-ct: bump to git HEADStijn Tintel2018-08-261-3/+3
| | | | | | | | | | e0d2ce0 ath10k: Support setting tx_antenna in descriptor field. 29c644f Update to latest 4.13 and 4.16 ath10k-ct drivers. 20db9db ath10k: Support vdev stats for 4.9, 4.16 kernel fd92066 ath10k: Support 'ct-sta-mode' for 9984 firmware that supports it. 34954f0 ath10k: get_tsf, PMF Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ath9k: fix setting up tx99 with a monitor mode interfaceFelix Fietkau2018-08-251-0/+92
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing dependency to regmap to kmod-gpio-mcp23s08Hauke Mehrtens2018-08-251-1/+1
| | | | | | | This fixes a build problem recently introduced. Fixes: a904003b9b5f ("kernel: fix kmod-gpio-mcp23s08 for linux 4.14") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-tcp-bbrKeith Wong2018-08-253-0/+40
| | | | | | | | | | | | This adds support for BBR (Bottleneck Bandwidth and RTT) TCP congestion control. Applications (e.g. webservers, VPN client/server) which initiate connections from router side can benefit from this. This provide an easier way for users to use BBR by selecting / installing kmod-tcp-bbr instead of altering kernel config and compiling firmware by themselves. Signed-off-by: Keith Wong <keithwky@gmail.com>
* mac80211: mwl8k: Expand non-DFS 5G channelsAntonio Silverio2018-08-251-0/+37
| | | | | | | Add non-DFS 5G upper channels (149-165) besides existed 4 lower channels (36, 40, 44, 48). Signed-off-by: Antonio Silverio <menion@gmail.com>
* kernel: fix kmod-gpio-mcp23s08 for linux 4.14Martin Schiller2018-08-251-3/+7
| | | | Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* mt76: update to the latest versionFelix Fietkau2018-08-241-3/+3
| | | | | | | | 7daf962 mt7603: add survey support 980c606 mt7603: add fix for CCA signal configuration 30b8371 mt7603: fix BAR rate Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mwlwifi: Update to 10.3.8.0-20180810Daniel Engberg2018-08-211-3/+3
| | | | | Update mwlwifi to 10.3.8.0-20180810 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* Revert "netfilter: separate IPv6 relevant kernel modules from IPv4"Jo-Philipp Wich2018-08-061-58/+5
| | | | | | | | | This reverts commit 42a3c6465a230a4e03f2a185f4db5ac57b89f673. The change was apparently never build-tested with all kmods enabled. I took a brief look but found no simple way to untangle this, so revert it. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* netfilter: separate IPv6 relevant kernel modules from IPv4Rosy Song2018-08-061-5/+58
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* kernel: modules: fix kmod-regmap reduxChristian Lamparter2018-08-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jonas Gorski commented on the previous patch: |This is actually the wrong fix and papers over an issue in one of our |local patches. | |We intentionally allow regmap to be built as a module, see | |/target/linux/generic/hack-4.14/259-regmap_dynamic.patch |[...] |[The regulator code] optionally supports regmap thanks to the stubs |provided if regmap is disabled - which breaks if you compile regmap |as a module. In order to mitigate this issue, this patch reverts the previous patch and replaces the existing IS_ENABLED(CONFIG_REGMAP) with IS_REACHABLE(CONFIG_REGMAP). This solves this particular issue as the regulator code will now automatically fallback to the regmap stubs in case the kmod-regmap module is enabled, but nothing else sets CONFIG_REGMAP=y. Note: There's still a potential issue that this patch doesn't solve: If someone ever wants to make a OpenWrt kernel package for a regulator module that requires the REGMAP feature for a target that doesn't set CONFIG_REGMAP=y but has CONFIG_REGULATOR=y, the resulting kmod-regulator-xyz package will not work on the target. Luckily, there aren't any in-tree OpenWrt kernel module packages for regulators at the moment. On the bright side: regmap is a critical part nowadays and all new and upcoming architectures require it by default. This will likely only ever be a problem for legacy targets and devices that cannot afford to enable REGMAP. Cc: Jonas Gorski <jonas.gorski@gmail.com> Cc: John Crispin <john@phrozen.org> Fixes: d00913d1215b ("kernel: modules: fix kmod-regmap") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kmod-sched-cake: bump to 20180728 optional gso splitKevin Darbyshire-Bryant2018-08-021-3/+3
| | | | | | | | | Follow upstream kernel patch that restores always splitting gso packets by default whilst making the option configurable from (tc) userspace. No ABI/API change Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mac80211: brcmfmac: backport patch for per-firmware featuresRafał Miłecki2018-07-311-0/+84
| | | | | | | This allows driver to support features that can't be dynamically discovered. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: modules: fix kmod-regmapChristian Lamparter2018-07-301-1/+1
| | | | | | | | | | | | | | | | | | | This patch fixes the a compile issue that was triggered by apm821xx/sata when kmod-regmap was selected. The CONFIG_REGMAP is declared in drivers/base/regmap/Kconfig as type "bool" and not "tristate". Hence the symbol should never be set to module, as this confuses the #if CONFIG_REGMAP guards in include/linux/regmap.h: |.../drivers/regulator/core.c:4041: undefined reference to `dev_get_regmap' |.../drivers/regulator/core.c:4042: undefined reference to `dev_get_regmap' |.../drivers/regulator/core.c:4044: undefined reference to `dev_get_regmap' |.../drivers/regulator/helpers.o: In function `regulator_is_enabled_regmap': |.../drivers/regulator/helpers.c:36: undefined reference to `regmap_read' |... Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: ath10k: Limit available channels via DT ieee80211-freq-limitSven Eckelmann2018-07-301-0/+44
| | | | | | | | | | | | | Tri-band devices (1x 2.4GHz + 2x 5GHz) often incorporate special filters in the RX and TX path. These filtered channel can in theory still be used by the hardware but the signal strength is reduced so much that it makes no sense. There is already a DT property to limit the available channels but ath10k has to manually call this functionality to limit the currrently set wiphy channels further. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* kernel: add kmod-iio-htu21Torbjörn Jansson2018-07-301-0/+22
| | | | | | | | | | | | | This adds support for the htu21 humidity and temperature sensor. To get it to work you have to do something like this: echo "htu21 0x40" >/sys/class/i2c-dev/i2c-1/device/new_device for example by adding it to rc.local Compile tested on brcm2708 and I have used an earlier version of this patch for more than a year. Signed-off-by: Torbjörn Jansson <torbjorn.jansson@mbox200.swipnet.se>
* ath10k-ct: fix build with current mac80211 packageJo-Philipp Wich2018-07-301-4/+15
| | | | | | | | | | | Commit 2dcd955aea ("mac80211: backport and update patches for ath10k") changed the DFS detector API, causing ath10k-ct to fail building due to a missing add_pulse() argument. Extend the already existing kernel compatibility patch to also adjust the add_pulse() call accordingly. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: package x86-optimized crypto-misc modulesDaniel Gimpelevich2018-07-301-2/+50
| | | | | | | | | | | | Some of the modules in the crypto-misc package have alternate implementations optimized for different x86 instruction set extensions, but only one of these was built for this package until now: twofish-i586.ko Tested with insmod, on both x86 and x86_64. The modules now have an autoload, which they previous didn't, loading the dependencies in the correct order. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* include: add netdev family support for nftablesRosy Song2018-07-301-0/+20
| | | | Signed-off-by: Rosy Song <rosysong@rosinson.com>
* mac80211: brcmfmac: backport 4.19 patches preparing monitor mode supportRafał Miłecki2018-07-276-1/+383
| | | | | | | | Monitor mode isn't supported yet with brcmfmac, it's just an early work. This also prepares brcmfmac to work stable with new firmwares which use updated struct for passing STA info. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: backport brcmfmac fixes & debugging helpers from 4.18Rafał Miłecki2018-07-269-2/+341
| | | | | | | | | | | | The most important is probably regression fix in handling platform NVRAM. That bug stopped hardware from being properly calibrated breaking e.g. 5 GHz for Netgear R8000. Other than that it triggers memory dumps when experiencing firmware problems which is important for debugging purposes. Fixes: 7e8eb7f309a8 ("mac80211: backport brcmfmac firmware & clm_blob loading rework") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: backport and update patches for ath10kAnsuel Smith2018-07-2219-74/+2508
| | | | | | | | | | | | | | | | | | | | | | | | This commit refreshes and updates the VHT160 ath10k support fix patches and adds a number of backports from ath-next: * 8ed05ed06fca ath10k: handle tdls peer events * 229329ff345f ath10k: wmi: modify svc bitmap parsing for wcn3990 * 14d65775687c ath10k: advertise TDLS wider bandwidth support for 5GHz * bc64d05220f3 ath10k: debugfs support to get final TPC stats for 10.4 variants * 8b2d93dd2261 ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk) * 4b190675ad06 ath10k: fix kernel panic while reading tpc_stats * be8cce96f14d ath10k: add support to configure channel dwell time * f40105e67478 ath: add support to get the detected radar specifications * 6f6eb1bcbeff ath10k: DFS Host Confirmation * 260e629bbf44 ath10k: fix memory leak of tpc_stats * 38441fb6fcbb ath10k: support use of channel 173 * 2e9bcd0d7324 ath10k: fix spectral scan for QCA9984 and QCA9888 chipsets Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [move backported patches in the 3xx number space, bring in upstream order, replace incomplete patch files with git format-patch ones, rewrite commit message, fix subject] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: insmod phy-broadcom module during preinitSteffen Förster2018-07-161-1/+1
| | | | | | | | | Some HP Thin clients use the broadcom nextreme chip as integrated NIC. It is connected via PCI express and will only be found automatically if phy-broadcom is loaded before tg3. This small change makes the thin client usable for Freifunk with gluon out of the box. Signed-off-by: Steffen Förster <steffen@chemnitz.freifunk.net>
* kernel: leds-apu2 remove boardname checkLukas Mrtvy2018-07-161-12/+0
| | | | | | | 'In different versions of coreboot are different names of apu boardname. No need to check boardname to load module.' Signed-off-by: Lukas Mrtvy <lukas.mrtvy@gmail.com>
* kmod-sched-cake: bump to 20180716Kevin Darbyshire-Bryant2018-07-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bump to the latest cake recipe. This backports tc class support to kernel 4.9 and other than conditional kernel compilation pre-processor macros represents the cake that has gone upstream into kernel 4.19. Loud cheer! Fun may be had by changing cake tin classification for packets on ingress. e.g. tc filter add dev ifb4eth0 parent 800b: protocol ip u32 match \ ip dport 6981 0xffff action skbedit priority 800b:1 Where 800b: represents the filter handle for the ifb obtained by 'tc qdisc' and the 1 from 800b:1 represents the cake tin number. So the above example puts all incoming packets destined for port 6981 into the BULK (lowest priority) tin. f39ab9a Obey tin_order for tc filter classifiers 1e2473f Clean up after latest backport. 82531d0 Reorder includes to fix out of tree compilation 52cbc00 Code style cleanup 6cdb496 Fix argument order for NL_SET_ERR_MSG_ATTR() cab17b6 Remove duplicate call to qdisc_watchdog_init() 71c7991 Merge branch 'backport-classful' 32aa7fb Fix compilation on Linux 4.9 9f8fe7a Fix compilation on Linux 4.14 ceab7a3 Rework filter classification aad5436 Fixed version of class stats be1c549 Add cake-specific class stats 483399d Use tin_order for class dumps 80dc129 Add class dumping 0c8e6c1 Fix dropping when using filters c220493 Add the minimum class ops 5ed54d2 Start implementing tc filter/class support Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mt76: update to the latest versionFelix Fietkau2018-07-131-3/+3
| | | | | | | | | 08719b1 mt76: use a per rx queue page fragment cache 4d2c565 mt76x2: reset HW before probe f622975 mt76x2: fix CCK protection control frame rate 6780375 mt76x2: add frame protection support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: gpio-nct5104d remove boardname checkLukáš Mrtvý2018-07-121-5/+0
| | | | | | | 'In different versions of coreboot are different names of apu boardname. No need to check boardname to load module.' Signed-off-by: Lukáš Mrtvý <lukas.mrtvy@gmail.com>
* mac80211: Expose support for ath9k DynackKoen Vandeputte2018-07-111-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enables support for Dynack feature. When a remote station is far away, we need to compensate for the distance by allowing more time for an ACK to arrive back before issueing a retransmission. Currently, it needs to be set fixed to indicate the maximum distance the remote station will ever be. While this mostly works for static antennae, it introduces 2 issues: - If the actual distance is less, speed is reduced due to a lot of wates wait-time - If the distance becomes greater, retries start to occur and comms can get lost. Allowing to set it dynamically using dynack ensures the best possible tradeoff between speed vs distance. This feature is currently only supported in ath9k. it is also disabled by default. Enabling it can be done in 2 ways: - issue cmd: iw phy0 set distance auto - sending the NL80211_ATTR_WIPHY_DYN_ACK flag to mac80211 driver using netlink Disabling it can be done by providing a valid fixed value. To give an idea of a practical example: In my usecase, we have mesh wifi device installed on ships/platforms. Currently, the coverage class is set at 12000m fixed. When a vessel moved closer (ex. 1500m), the measured link capacity was a lot lower compared to setting the coverage class fixed to 1500m Dynack completely solved this, nearly providing double the bandwidth at closer range compared to the fixed setting of 12000m being used. Also when a vessel sailed to a distance greater than the fixed setting, communication was lost as the ACK's never arrived within the max allowed timeframe. Actual distance: 6010m iperf 60s run avg Fixed 12150m: 31 Mbit/s Dynack: 58 Mbit/s Fixed 6300m: 51 Mbit/s Dynack: 59 Mbit/s Fixed 3000m: 13 Mbit/s (lots of retries) Dynack: 58 Mbit/s Actual distance: 1504m iperf 60s run avg Fixed 12150m: 31 Mbit/s Dynack: 86 Mbit/s Fixed 6300m: 55 Mbit/s Dynack: 87 Mbit/s Fixed 3000m: 67 Mbit/s Dynack: 87 Mbit/s Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: initialize sinfo in cfg80211_get_stationSven Eckelmann2018-07-071-0/+42
| | | | | | | | | | | | | | | | | | | Most of the implementations behind cfg80211_get_station will not initialize sinfo to zero before manipulating it. For example, the member "filled", which indicates the filled in parts of this struct, is often only modified by enabling certain bits in the bitfield while keeping the remaining bits in their original state. A caller without a preinitialized sinfo.filled can then no longer decide which parts of sinfo were filled in by cfg80211_get_station (or actually the underlying implementations). cfg80211_get_station must therefore take care that sinfo is initialized to zero. Otherwise, the caller may tries to read information which was not filled in and which must therefore also be considered uninitialized. In batadv_v_elp_get_throughput's case, an invalid "random" expected throughput may be stored for this neighbor and thus the B.A.T.M.A.N V algorithm may switch to non-optimal neighbors for certain destinations. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* ath10k-ct: search DT for BDF variant infoSven Eckelmann2018-07-073-1/+363
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Board Data File (BDF) is loaded upon driver boot-up procedure. The right board data file is identified on QCA4019 using bus, bmi-chip-id and bmi-board-id. The problem, however, can occur when the (default) board data file cannot fulfill the vendor requirements and it is necessary to use a different board data file. This problem was solved for SMBIOS by adding a special SMBIOS type 0xF8. Something similar has to be provided for systems without SMBIOS but with device trees. No solution was specified by QCA and therefore a new one has to be found for ath10k. The device tree requires addition strings to define the variant name wifi@a000000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; wifi@a800000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; This would create the boarddata identifiers for the board-2.bin search * bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=RT-AC58U * bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=RT-AC58U Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* linux: update license tag to use correct SPDX tagFlorian Eckert2018-07-071-1/+1
| | | | | | Use SPDX tag. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* kmod-sched-cake: bump to latest 20180706Kevin Darbyshire-Bryant2018-07-071-3/+3
| | | | | | | Fixes a potential infinite loop bug when in unlimited (ie not using built in shaper) mode. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kmod-sched-cake: bump to latest cakeKevin Darbyshire-Bryant2018-07-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This bumps to the latest & possibly greatest cake, sadly it's still inedible but from an SQM point of view quite tasty :-) Main tweaks since previous bump, improved ack_filter, some extra stats, support for 64bit netlink parameters (higher rates/byte counters) 0520a6c Fix NAT option handling 8da93e1 Make sure we always call qdisc_watchdog_init() in cake_init() f65daf6 Fix mismatched parenthesis 51d4ab3 Change flag handling to be safe even when mixing with non-eligible ACKs f2ea091 ack_filter: protect DCTCP with stricter filtering of ECE marks 28b4560 ACK filter: Handle wrapping sequence numbers and DSACKs 73f62d9 Use the right PAD attribute for options 5969c14 Use 32 for tin backlog e289f31 Move all the u64 netlink attributes together 36180a0 Check ACK seqno before parsing SACKs 91bbc01 Merge branch 'mine' into cobalt 58c55ec Rework SACK check to compare the ranges of two SACKs 9a5d593 ack_filter: Add proper handling of SACKs eca95d4 ack_filter: short-circuit TCP flag check d50a246 compat: backport some ktime functions 7b7ad11 compat: define tcpopt_fastopen for pre-4.1 kernels ca54cdb Fix ktime compare 9d7dcc0 ack filter: Parse TCP options and only drop safe ones b119882 Return EOPNOTSUPP on NAT option if conntrack is not available 842d7f0 Don't try to pad stats with tin_stats padding bd46dc2 Use 64-bit divide helper 8e41bf0 Make sure we never drop SACKs when filtering ACKs 66e5d60 Avoid comparing ktime_t to scalar values 7fab017 Actually commit the ktime_t changes fca6d13 Switch to ktime_t and get rid of cobalt.h 6f7e5af Can't use do_div with 64-bit divisors Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mac80211: make rtl8xxxu buils againJohn Crispin2018-06-261-0/+38
| | | | | | we only wanted to drop rtl8xxxue support Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: rtl8xxxu: drop support patchesJohn Crispin2018-06-2658-3569/+0
| | | | | | | | | After a very enlightening but unfortunately far too short exchange with Jes we mutually agreed to drop the patches. They are unfortunately not ready yet. Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: John Crispin <john@phrozen.org>
* netfilter: add bpf match supportAlin Nastac2018-06-261-0/+1
| | | | | | | | | Add xt_bpf modules to {kmod-ipt,iptables-mod}-filter. Match using Linux Socket Filter. Expects a BPF program in decimal format. This is the format generated by the nfbpf_compile utility. Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
* mac80211: enable ath10k LED support by defaultStijn Tintel2018-06-251-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | Commit 61d57a2f88b90ba951012e66c7c6fae9234c97b4 adds ath10k LED support, but doesn't add an option to actually enable it. After enabling this option, a LED named ath10k-phy0 appears in sysfs, and a trigger can be assigned to it. Since 60deb3cdef4a the default set trigger is the tpt one. Enable it by default, as most devices using ath10k chips shouldn't be severely space-constrained. There are likely many devices that can benefit from having it enabled, like my testing device. Before: text data bss dec hex filename 245311 8899 16 254226 3e112 ath10k_core.ko After: text data bss dec hex filename 245979 8899 16 254894 3e3ae ath10k_core.ko Tested on a D-Link DAP-2695-A1 (ar71xx). Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mac80211: ath10k: use tpt LED trigger by defaultMathias Kresin2018-06-251-0/+53
| | | | | | | | Use the tpt LED trigger for each created phy led. Ths way LEDs attached to the ath10k GPIO pins are indicating the phy status and blink on traffic. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: drop 355-ath9k-limit-retries-for-powersave-response-frames.patchJohn Crispin2018-06-2219-243/+157
| | | | | | several people reported this bug to be causing drop out issues Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: ath10k fix vht160 firmware crashAnsuel Smith2018-06-222-0/+182
| | | | | | When the 160mhz width is selected the ath10k firmware crash. This fix this problem. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* mac80211: ath10k add leds supportAnsuel Smith2018-06-221-0/+617
| | | | | | This adds support for leds handled by the wireless chipset. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: define THERMAL_EMERGENCY_POWEROFF_DELAY_MSStijn Tintel2018-06-211-0/+1
| | | | | | | | Enabling CONFIG_ATH10K_THERMAL on targets that don't have CONFIG_THERMAL enabled in their kernel config causes build to fail due to missing symbol THERMAL_EMERGENCY_POWEROFF_DELAY_MS. Add it to kmod-thermal. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ltq-vdsl-fw: fix ltq-vdsl-vr9-vectoring-fw-installer package installDaniel Golle2018-06-211-1/+1
| | | | | | | The package is not being generated otherwise, which is fatal because it is part of the subtargets default package set... Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: update to the latest versionFelix Fietkau2018-06-211-3/+3
| | | | | | 1d4ca10 mt76x2: track rssi for gain adjustment per station Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ltq-vdsl-fw: add meaningful version informationDaniel Golle2018-06-201-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
generated by cgit v1.1 at 2024-11-18 09:47:09 +0000