summaryrefslogtreecommitdiff
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: ath10k: search DT for BDF variant infoSven Eckelmann2018-01-131-0/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Board Data File (BDF) is loaded upon driver boot-up procedure. The right board data file is identified on QCA4019 using bus, bmi-chip-id and bmi-board-id. The problem, however, can occur when the (default) board data file cannot fulfill the vendor requirements and it is necessary to use a different board data file. This problem was solved for SMBIOS by adding a special SMBIOS type 0xF8. Something similar has to be provided for systems without SMBIOS but with device trees. No solution was specified by QCA and therefore a new one has to be found for ath10k. The device tree requires addition strings to define the variant name wifi@a000000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; wifi@a800000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; This would create the boarddata identifiers for the board-2.bin search * bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=RT-AC58U * bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=RT-AC58U Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* kmod-sched-cake: bump to latest cake bakeKevin Darbyshire-Bryant2018-01-111-3/+3
| | | | | | | | | | | | | | | | | More important bug fix: 402f05c Use full-rate mtu_time in all tins. Fixes an issue where some cake tins experienced excessive latency since 49776da (dynamically adjust target) Minor bug fixes: 31277c2 Avoid unsigned comparison against zero. Fix compiler warning, no known impact. 8cf5278 ack_filter: fix TCP flag check. A very contrived case may have lead to dropping a SYN packet that should not be dropped. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* lantiq: create ATM/PTM interfaces with dsl as netdev nameMathias Kresin2018-01-102-4/+4
| | | | | | | | | | | | | | | | | | | | | Renaming an atm etherbride using 'ip link' (via hotplug) is racy since the original netdev might disappear before br2684ctl has finished appling it's setting: local2.notice br2684ctl[1667]: Interface "nas0" created sucessfully local2.notice br2684ctl[1667]: Communicating over ATM 0.8.35, encapsulation: LLC kern.info kernel: dsl0: renamed from nas0 kern.err kernel: br2684:br2684_regvcc: tried to attach to non-existent device local2.err br2684ctl[1667]: Could not configure interface:No such device or address By passing the final used netdev name to br2684ctl_wrap another race condition workaround will be enabled again. Change the lantiq ptm driver to create a netdev with the name dsl as well. Albeit the rename via 'ip link' works fine so far, using a different approach for ptm then atm could be confusing. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: kmod-w1 depends on kmod-hwmon-core since Linux 4.14Jo-Philipp Wich2018-01-091-0/+1
| | | | | | | | | Fixes the following dependency error encountered by the buildbots: Package kmod-w1 is missing dependencies for the following libraries: hwmon.ko Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: fix packaging of kmod-gpio-nxp-74hc164Jo-Philipp Wich2018-01-071-3/+3
| | | | | | | | | | | | | | | | The NXP 74HC164 GPIO expander driver uses a different config symbol ("CONFIG_GPIO_74X164") and module name since since at least Kernel version 2.6.37. Update the kmod package definition accordingly by adjusting kconfig and module file names. This unrelated, but correct change has been separated from the WNR2000v5 support commits. Ref: https://github.com/lede-project/source/pull/1256 Suggested-by: Raphael Catolino <raphael.catolino@gmail.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: make uas work during early bootDaniel Albers2018-01-021-1/+1
| | | | | | | | | | | | Add the uas(p) module to the modules loaded early on the boot process. The uas(p) is an modern alternative, which is used by the modern USB3 storage cases, compared to the bot protocol. To be able to use uas(p) storage cases for extroot, the kernel module has to be loaded before the search for extroot has been called. This patch changes the load order to support uas(p) storage cases for extroot. Signed-off-by: Daniel Albers <daniel.albers@public-files.de>
* mwlwifi: update to version 10.3.4.0 / 2017-12-14Kabuli Chana2017-12-311-3/+3
| | | | | | Lastest stamped version Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* kmod-sched-cake: bump to latest bakeKevin Darbyshire-Bryant2017-12-301-3/+3
| | | | | | | | | Fix overhead accounting error introduced by f33c4d6 refactor cake_advance_shaper and ack_filter Symptoms were links running under rate. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: add i2c-smbus module packagePhilip Prindeville2017-12-261-3/+18
| | | | | | | Intel motherboards (as well as the Cavium ThunderX SoC) use a superset of the I2C protocol called SMBus. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: kmod-crypto-hw-talitos: fix dependenciesHauke Mehrtens2017-12-201-1/+1
| | | | | | | | | | | With the updated to kernel 4.9.70 in commit f704b643b9cab ("kernel: Update kernel 4.9 to 4.9.70"), the talitos.ko kernel module got a new dependency to kmod-crypto-des in this upstream commit: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=552f74cbd6ec806ab5ce45336a26cae1e015dbe2 This fixes a build problem found by built bot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt76: update to the latest version, reverts MAC address changes causing ↵Felix Fietkau2017-12-171-3/+3
| | | | | | | | | | | | | | | | | | | performance regressions cf4a5ce mt76: fix memcpy to potential null pointer on failed allocation ca5ca8c mt76x2: fix possible NULL pointer dereferencing in mt76x2_ampdu_action() 2d4b8f5 mt76x2: mac: fix possible NULL pointer dereferencing in mt76x2_mac_write_txwi() 4ca8bba mt76x2: eeprom: fix typo in mt76x2_get_power_info_5g() 00f7e60 mt7603: fix configuration for HT40 31e9bdb mt7603: main: fix possible NULL pointer dereferencing in mt7603_ampdu_action() bf90dd2 mt7603: mcu: fix potential NULL pointer dereferencing on failed allocation 860b185 Revert "mt76x2: init: disable APCLI by default" bcd576e Revert "mt76x2: drop wiphy->addresses" bdc6f2f Revert "mt76x2: clean up MAC/BSSID address initialization" d242650 Revert "mt76x2: remove MAC address limitation for multi-vif setups" 68b0cf1 mt76x2: add functions for setting extended MAC address registers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing dependencies to kmod-crypto-acompressHauke Mehrtens2017-12-161-0/+2
| | | | | | | kmod-lib-lzo and kmod-lib-lz4 depend in kernel 4.14 on kmod-crypto-acompress, add this missing dependency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-rtc-ds1307: add dependency to regmapHauke Mehrtens2017-12-161-1/+1
| | | | | | | In kernel 4.14 kmod-rtc-ds1307 depends on regmap-i2c, add this missing dependency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-iio-bmp280: allow compile with kernel 4.14Hauke Mehrtens2017-12-161-1/+1
| | | | | | This package also compiles with kernel 4.14. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-zram: deactivate CONFIG_ZRAM_WRITEBACK for kernel 4.14Hauke Mehrtens2017-12-161-0/+1
| | | | | | | This new option was introduced in kernel 4.14 and should be deactivated by default. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-fbcon: deactivate for kernel 4.14Hauke Mehrtens2017-12-161-1/+1
| | | | | | | | CONFIG_FRAMEBUFFER_CONSOLE does not activate new modules any more in kernel 4.14, but CONFIG_FRAMEBUFFER_CONSOLE is now a boolean option which change the kmod-fb package. kmod-fbcon should be split up. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-sound-core: handle moved snd-seq-device.koHauke Mehrtens2017-12-161-1/+2
| | | | | | The snd-seq-device.ko kernel module was moved with kernel 4.13. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-mmc: handle moved mmc_block.koHauke Mehrtens2017-12-161-1/+2
| | | | | | mmc_block.ko was moved with kernel 4.10. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-rxrpc: handle renamed kernel moduleHauke Mehrtens2017-12-161-2/+3
| | | | | | | The kernel module was renamed with kernel 4.11, handle that in the package definition. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: deactivate some new network featuresHauke Mehrtens2017-12-161-2/+6
| | | | | | | | | | | This deactivates the following options which were introduced between kernel 4.9 and 4.14 in some kernel packages: CONFIG_INET_ESP_OFFLOAD CONFIG_INET6_ESP_OFFLOAD CONFIG_LWTUNNEL_BPF CONFIG_NET_9P_XEN Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: unset CONFIG_CIFS_SMB311 in kmod-fs-cifsHauke Mehrtens2017-12-161-1/+2
| | | | | | Do not activate the experimental feature CONFIG_CIFS_SMB311. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-crypto-ecdhHauke Mehrtens2017-12-162-1/+26
| | | | | | | | | | In kernel 4.14 kmod-bluetooth depends on kmod-crypto-ecdh, add kmod-crypto-ecdh to LEDE. Both packages also depend on the kmod-crypto-kpp package. To build this we have to fix the dependency of CRYPTO_ECDH which has a typo. This patch is already accepted upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-crypto-rsaHauke Mehrtens2017-12-161-2/+20
| | | | | | | | In kernel 4.14 kmod-crypto-hw-ccp depends on kmod-crypto-rsa, add it. kmod-crypto-rsa also packages the ASN1 parser and some other code which is currently only used by this module. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-crypto-acompressHauke Mehrtens2017-12-161-1/+13
| | | | | | In kernel 4.14 kmod-crypto-deflate depends on kmod-crypto-acompress. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-lib-zstdHauke Mehrtens2017-12-162-1/+23
| | | | | | | In kernel 4.14 kmod-fs-btrfs depends on the zstd compression libraries, add it to the package system. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-daxHauke Mehrtens2017-12-161-1/+12
| | | | | | | In kernel 4.14 kmod-dm depends on kmod-dax. Add DAX: "Direct access to differentiated memory" to LEDE. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: tg3: deactivate hwmon for kernel 4.14Hauke Mehrtens2017-12-161-2/+3
| | | | | | | In kernel 4.14 hwmon support can be deactivated for the tg3 driver, deactivate it by default to save some space. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netdevices.mk: add Sun Neptune 10Gbit EthernetLucian Cristian2017-12-161-0/+16
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* kernel: tune e1000e module parametersJo-Philipp Wich2017-12-161-0/+3
| | | | | | | | | | | | | The default e1000e parameters (interrupt throttling rate, MSI/MSI-X mode) are optimized for desktop and server computers to optimize user-space execution (i.e. what's typically referred to as "useful" work). This assumption breaks on a router under load where most of the "useful" work actually takes place either in hardware interrupt handlers (IRQ) or at software IRQ (swirq) modes, so we try to reflect that by overriding these parameters with more appropriate values. Patch-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kmod-sched-cake: bump to latest bake of cakeKevin Darbyshire-Bryant2017-12-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There has been recent significant activity with the cake qdisc of late but in the cobalt branch. Some of that effort is related to upstreaming to kernel & iproute2 mainline but we're not quite there yet. Relevant feature changes: ingress mode: Instead of only counting packets that make it past the shaper, include packets we've decided to drop as well, since they did arrive with us on the link and took link capacity. This mode is more suitable for shaping the ingress of a link (e.g. from ISP) rather than the more normal egress. ptm mode: Minor optimisation in packet overhead calculation. dual-src/dsthost/triple-isolate: Optimise only calculating src or dst host hashes only if required. ack-filter/ack-filter-aggressive: Filter excessive TCP ACKS. Useful in highly assymetric links (downstream v upstream capacity) where the majority of upstream link capacity is occupied with ACKS for downstream traffic. A separate iproute2 patch to teach it about Cake's new features will follow. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mwlwifi: update to version 10.3.4.0 / 2017-11-29Kabuli Chana2017-12-121-3/+3
| | | | | | Improves stability on WRT3200ACM Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* merge: ssid: update default ssidZoltan HERPAI2017-12-082-2/+2
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* mt76: update to the latest version, fixes setting per-vif mac addressFelix Fietkau2017-12-081-3/+3
| | | | | | | | | | | | | | d02a05b mt7603: update firmware to version 20160107100755 4d4cd05 Partially revert "mt7603: use mcu command to set timing registers, fix OFDM timeout values" 170f334 mt76x2: remove MAC address limitation for multi-vif setups 3563b8f mt76x2: clean up MAC/BSSID address initialization 9de77e1 mt76x2: drop wiphy->addresses a6a6e25 mt76x2: init: disable APCLI by default c64633e mt76x2: configure rx filter based on monitor mode setting ac815fa mt76x2: init: fix rx filter default value during init e504656 mt7603: configure other-unicast drop based on monitor mode setting Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, adds stability fixesFelix Fietkau2017-12-031-3/+3
| | | | | | | | | | | | | | | | | | | | | 11f42a8 mt76x2: add channel argument to eeprom tx power functions 3bd7e76 mt76x2: initialize channel power limits 19fff41 mt76x2: convert between per-chain tx power and combined output 737cf2b mt7603: rename mt7603_mac_reset to mt7603_pse_reset 8026638 mt7603: rename MT_PSE_RESET register c4dd32a mt7603: remove watchdog reset on interface stop d99092b mt7603: remove WARN_ON_ONCE for workaround checks c8807b4 mt7603: simplify PSE reset d8a5990 mt7603: warn if PSE reset fails c079960 mt7603: clean up dma debug reads 96817d6 mt7603: make mt7603_mac_watchdog_reset() static e953c78 mt7603: clear wtbl PS bit for powersave responses 57a2e33 mt7603: set tx-skip flag for powersave clients c8e5ab1 mt7603: initialize wtbl ps flag on station add b4034cf mt76x2: remove some harmless WARN_ONs in tx status and rx path 8e17d36 mt7603: remove some harmless WARN_ONs in rx path Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ltq-ifxos: fix compilation against glibcYousong Zhou2017-11-302-3/+60
| | | | | | Fixes FS#1196 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* mt76: update to the latest version, fixes encrypted mesh support and HT20 issuesFelix Fietkau2017-11-291-3/+3
| | | | | | | | | fc28872 mac80211: add missing include a4c82ca mt7603: add missing include required on newer kernels 792859b mt76x2: fix transmission of encrypted management frames a51358e mt76x2: increase OFDM SIFS time Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: tweak TSQ settingsFelix Fietkau2017-11-292-1/+16
| | | | | | | | | | Latencies can be much higher on wifi devices, especially with aggregation. Tune the network stack setting introduced in the previous commit to account for that. This commit reintroduces the previously reverted one with a fix for the crash issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "mac80211: tweak TSQ settings"Felix Fietkau2017-11-282-15/+1
| | | | | | | | This reverts commit 2dc485250d516f1535eeaf53f0f2f5742e5f9e0c. This patch needs some additional checks in order to avoid overwriting unrelated fields for request sockets. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mwlwifi: Update to latest commit in upstream repoDaniel Engberg2017-11-251-3/+3
| | | | | | | Update to latest commit in upstream repo Bumps 88W8964 firmware to 9.3.0.8 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* kmod-sched-cake: update to latest git HEADFushan Wen2017-11-251-3/+3
| | | | | | | | | | dfb2f6c pkt_sched: make compile again 5ab7026 sch_cake: make compile again 6f28803 codel5: make more checkpatch compliant bd426aa Fix build error on 4.12 e4a3628 Whitespace tidy up Signed-off-by: Fushan Wen <qydwhotmail@gmail.com>
* kernel: i2c-piix4: fix dependency on TARGET_x86Hauke Mehrtens2017-11-221-1/+1
| | | | | | | Fix the target dependency to make it possible to select this module also on x86 target and its subtargets. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: e100: take e100 firmware from linux-firmware repositoryHauke Mehrtens2017-11-221-8/+1
| | | | | | | | | The firmware directory in the Linux kernel was removed in kernel 4.14, take the e100 firmware files now from the linux-firmware repository instead. To do so create the new package e100-firmware. This will also work with older kernel versions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add NFS4 client supportMarcin Jurkowski2017-11-222-17/+68
| | | | | | | | | | | | | | | | | | | Adds NFS4 client support: 1. Package kmod-fs-nfs is split into kmod-fs-nfs (nfs.ko) and kmod-fs-nfs-v3 (nfsv3.ko). 2. A new package kmod-fs-nfs-v4 (nfsv4.ko) is created. 3. Package kmod-fs-nfs-common-v4 is renamed to kmod-fs-nfs-rpcsec and includes additional module rpcsec_gss_krb5.ko. CONFIG_NFS_V4 goes into kmod-fs-nfs-v4, CONFIG_NFSD_V4 (NFS4 server) is removed. Missing kernel module oid_registry.ko needed by auth_rpcgss.ko is added to the package. A new package kmod-crypto-cts needed by rpcsec_gss_krb5.ko is also created. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> [add dependency to kmod-crypto-ecb in fs-nfs-common-rpcsec] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-i2c-i801Martin Schiller2017-11-221-0/+26
| | | | | | Signed-off-by: Martin Schiller <ms@dev.tdt.de> [Add i2c-smbus.ko and fix target dependency] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add it87-wdt watchdog timer moduleMartin Schiller2017-11-221-0/+18
| | | | | | | | | | | The module parameters "nogameport=1" and "nocir=1" are needed, because this is not supported on recent chips and doesn't really tell if the system is stable. As this features will already be removed in linux-4.13 or newer, this module parameters can be removed in the future. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* acx-mac80211: fix build on kernel 4.9Mathias Kresin2017-11-221-0/+16
| | | | | | | | | | | The DEFINE_PCI_DEVICE_TABLE macro was removed with upstream commit 7e9321599011 ("treewide: remove references to the now unnecessary DEFINE_PCI_DEVICE_TABLE"). Use the pci_device_id struct to fix the acx-mac80211 build failure on ramips. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: fix a race condition that could lead to a use-after-free on a timerFelix Fietkau2017-11-201-0/+37
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix netlink family id for nl80211 messagesFelix Fietkau2017-11-201-0/+10
| | | | | | | Fixes responses for nl80211 calls Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix lzo and lz4 modulesJohn Crispin2017-11-201-2/+6
| | | | | | both of these have been split up and require additional ko files. Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: enable brcmfmac's SDIO support on sunxi targetLuis Araneda2017-11-171-0/+1
| | | | | | Needed to support some SDIO connected cards, like AMPAK modules Signed-off-by: Luis Araneda <luaraneda@gmail.com>
generated by cgit v1.1 at 2024-11-25 19:44:30 +0000