summaryrefslogtreecommitdiff
path: root/package/network/services/hostapd/files
Commit message (Collapse)AuthorAgeFilesLines
* package/network/services: probably from OpenWRTLudovic Pouzenc2018-09-162-5/+4
|
* hostapd: fix some whitespacesLuka Perkov2014-08-111-3/+3
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42111
* hostapd: Reintroduce Full Dynamic VLAN supportJo-Philipp Wich2014-07-291-1/+14
| | | | | | | | | | This patch brings full dynamic vlan support to netifd that existed in hostapd.sh in Attitude Adjustment. Signed-off-by: Joseph CG Walker <Joe@ChubbyPenguin.net> [jow@openwrt.org: changed commit message, rebased on top of current hostapd.sh] Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 41872
* hostapd: add a require_mode option in wifi-device sections to select the ↵Felix Fietkau2014-07-151-1/+7
| | | | | | | | minimum hardware mode that the AP requires from clients Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41665
* hostapd: move reading of rsn_preauth out of auth_type=eap contextFelix Fietkau2014-06-051-3/+3
| | | | | | | | | | rsn_preauth is used outside of "case $auth_type", so if it is set for an EAP-enabled SSID, it would also be set for the following non-EAP-enabled SSIDs, because it would not be read again. Signed-off-by: Reiner Herrmann <reiner@reiner-h.de> SVN-Revision: 41012
* hostapd: replace undefined $bridge with $network_bridgeFelix Fietkau2014-06-041-3/+3
| | | | | | Signed-off-by: Reiner Herrmann <reiner@reiner-h.de> SVN-Revision: 41002
* hostapd: Add optional support for hostapd own_ip_addr in wireless configJohn Crispin2014-06-022-1/+5
| | | | | | | | | | | | `own_ip_addr` is used by hostapd as NAS-IP-Address. This is used to identify the AP that is requesting the authentication of the user and could be used to define which AP's can authenticate users. Some vendors implement only NAS-Identifier or NAS-IP-Address and not both. This patch adds ownip as an optional parameter in /etc/config/wireless. Signed-off-by: Thomas Wouters <thomaswouters@gmail.com> SVN-Revision: 40934
* hostapd: add an option for 802.11h (enabled by default)Felix Fietkau2014-05-031-2/+6
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40690
* 802.11s: fix authsae support in netifdJohn Crispin2014-04-121-1/+1
| | | | | | | | | | This patch implements support for 802.11s protected mesh wireless networks (using authsae) in the netifd framework. Until meshd-nl80211 implements a proper -P option for the PID file, this uses shell backgrounding in order to be able to get the PID for the process. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 40497
* hostapd: fix "bad number" error due to missing wps_pbc_in_m1 option (since ↵Felix Fietkau2014-04-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | r39995) r39995 introduced a new parameter wps_pbc_in_m1 to wifi wps config, but apparently did not provide a default value 0. When that option's non-existing value is later evaluated in /lib/netifd/hostapd.sh, it causes the "bad number" error to be logged in syslog if user has not set the wps_pbc_in_m1 option. The error materialises only if user has enabled wps. Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio1 (1254): sh: bad number Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio0 (1253): sh: bad number Discussion in bug 15508: https://dev.openwrt.org/ticket/15508#comment:3 Error is caused by line 282: https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/netifd.sh#L282 My patch sets the parameter's default value to 0, which does nothing. The default might also be set a bit later in the function, but this felt like the most clear place to do that. Signed-off-by hnyman <hannu.nyman@iki.fi> SVN-Revision: 40469
* hostapd: add pbc_in_m1 optionFelix Fietkau2014-03-211-2/+3
| | | | | | | | | | | | Option pbc_in_m1 is being used as a WPS capability discovery workaround for PBC with Windows 7. Add possibility to enable this workaround from UCI. To enable it, turn on wps and set wps_pbc_in_m1 parameter to 1. Signed-off-by: Pawel Kulakowski <pawel.kulakowski@tieto.com> SVN-Revision: 39995
* hostapd: add validation rules to wireless handlerJohn Crispin2014-02-181-6/+6
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39620
* wifi: Introduce 802.11ac supportFelix Fietkau2014-02-032-0/+6
| | | | | | | | | | | | | | | | This patch introduces 802.11ac support to mac80211 and hostapd. The split of VHT160 in two 80 MHz bands is not yet supported, since it requires an additional user supplied parameter for the channel of the second band. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> Signed-off-by: Simon Wunderlich <simon@open-mesh.com> [sven@open-mesh.com: Rebased patch, merged htmode and vhtmode, removed special hwmode, replaced uci vht_capab list with overwritable autoconfig, fixed hostapd integration, fixed commit description, add HT40+/- for VHT modes, add VHT40 center_freq autoconfig, refactored major parts] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 39456
* hostapd: do not get basic_rate as a simple string variableFelix Fietkau2014-02-021-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 39448
* hostapd: fix basic rate list handling with netifdFelix Fietkau2014-01-311-1/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 39431
* hostapd: Fix 80211w setup with netifdJo-Philipp Wich2014-01-281-1/+1
| | | | | | Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> SVN-Revision: 39412
* hostapd: Fix basic_rate setup with netifdJo-Philipp Wich2014-01-281-0/+1
| | | | | | Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> SVN-Revision: 39411
* hostapd: fix mcast_rate settingJohn Crispin2014-01-141-1/+1
| | | | | | | | | | Introduced by ("netifd: add wireless configuration support and port mac80211 to the new framework") Reported-by: René van Weert <r.vanweert@sowifi.com> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> SVN-Revision: 39288
* hostapd: fix frequency setting for IBSS/RSNJohn Crispin2014-01-121-2/+4
| | | | | | | | | | Introduced by ("netifd: add wireless configuration support and port mac80211 to the new framework") Reported-by: René van Weert <rene@sowifi.com> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> SVN-Revision: 39231
* hostapd: fix mixed wep/wpa with netifdFelix Fietkau2013-12-281-0/+1
| | | | | | Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> SVN-Revision: 39174
* hostapd: fix the uci option name for ap isolateFelix Fietkau2013-12-281-5/+5
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 39173
* hostapd: fix wep with netifdFelix Fietkau2013-12-231-4/+4
| | | | | | Signed-off-by: Catalin Patulea <cat@vv.carleton.ca> SVN-Revision: 39156
* hostapd: fix short_preamble optionJo-Philipp Wich2013-12-101-1/+1
| | | | SVN-Revision: 39027
* hostapd: properly parse wmm and hidden uci options (#14589)Jo-Philipp Wich2013-12-081-1/+1
| | | | SVN-Revision: 39005
* hostapd: fix maclist processing with netifdFelix Fietkau2013-12-031-2/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38991
* netifd: add wireless configuration support and port mac80211 to the new ↵Felix Fietkau2013-12-021-0/+577
| | | | | | | | framework Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38988
* hostapd: change the wildcard for the hostapd control socket directoryFelix Fietkau2013-12-021-1/+1
| | | | | | | | prepare for using /var/run/hostapd instead of /var/run/hostapd-phy* Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38986
* hostapd: add support for auto-channel selectionFelix Fietkau2013-11-252-0/+4
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38915
* hostapd: remove random pool support - the entropy it gathers is questionable ↵Felix Fietkau2013-11-185-0/+5
| | | | | | | | and we have better entropy sources on common platforms now Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38852
* wpa_supplicant: fix beacon_int configuration optionJo-Philipp Wich2013-10-181-3/+3
| | | | | | | | | wpa_supplicant expects beacon_int instead of beacon_interval in its config file. Signed-off-by: Bruno Randolf <br1@einfach.org> SVN-Revision: 38451
* hostapd: recognize 8021x as an authentication modeFelix Fietkau2013-10-081-1/+1
| | | | | | | | | | | | | | Currently, in order to configure the authentication daemon in 8021x mode, we need to set wireless.@wifi-iface[0].encryption="wpa" Though it works it confuses folks as 8021x is using WEP encryption and not WPA. Therefore the terminology itself is confusing. This change adds 8021x as a recognized string for 8021x authentication. Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> SVN-Revision: 38339
* hostapd: add external registrar supportFelix Fietkau2013-10-081-0/+3
| | | | | | | | | | | | | Setting wireless.@wifi-iface[N].ext_registrar=1 will enable UPNP advertising and add an external registrar to the interface this vif belongs to (br-lan if the vif is included in the LAN bridge). By enabling this we append upnp_iface=xxx to the hostapd config file. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> SVN-Revision: 38338
* hostapd: enable WPS2 support on hostapd-full.configFelix Fietkau2013-10-081-1/+2
| | | | | | | | | | Enable CONFIG_WPS2 for hostapd. This is required to support options like Virtual Push Button in WPS. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> SVN-Revision: 38337
* hostapd: fix hostapd RSN preauthentication PMKSA cachingFelix Fietkau2013-10-081-4/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 2009 OpenWrt's hostapd config added an "auth_cache" boolean to be used to address a reported issue #12129 [0] on a forum [1]. The reported issue on the ticket is different that the one described on the forum. The commit was r33359. This change broke proper RSN preauthentication [2] [3] [4] expectations on hostapd's configuration for WPA2 and this in turn disabled PMKSA caching and Opportunistic Key Caching. This change: * Leaves the "auth_cache" to be used only for WPA networks for those looking to use this as a workaround to a reported issue but annotates a warning over its usage. * Separate "auth_cache" from WPA2 RSN preauthentication, leaving WPA2 RSN preauthentication to enabled only with "rsn_preauth" with the expected and recommended settings. * Adds a new WPA2 RSN preauthentication "rsn_preauth_testing" to be used when evaluating funcionality for WPA2 RSN preauthentication with the expected and recommended settings with the only difference so far with what should be enabled by default to disable Opportunistic Key Caching. Disabling the PMKSA cache should mean the STA could not roam off and back onto the AP that had PMKSA caching disabled and would require a full authentication cycle. This fixes this for WPA2 networks with RSN preauthentication enabled. This change should be applied to AA as well as trunk. TL DR; The issue described on the forum has to do with failure of a STA being able to try to authenticate again with the AP if it failed its first try. This may have been an issue with hostapd in 2009 but as per some tests I cannot reproduce this today on a WPA2 network. The issue described on the ticket alludes to a security issue with the design of using a Radius server to authenticate to an AP. The issue vaguely alludes to the circumstances of zapping a user, deleting their authentication credentials to log in to the network, and that if RSN preauthentication is enabled with PMKSA caching that the user that was zapped would still be able to authenticate. Lets treat these as separate issues. I cannot reproduce the first issue reported on the forums of not being able to authenticate anymore on a WPA2 network. The issue reported on the ticket modified WPA2 RSN preauthentication by adding two fields to the hostapd configuration if auth_cache was enabled: * disable_pmksa_caching=1 * okc=0 The first one disables PMKSA authentication cache. The second one disables Opportunistic Key Caching. The issue reported on the ticket was fixed by implementing a workaround in hostapd's configuration. Disabling PMKSA caching breaks proper use of WPA2 RSN pre authentication. The usage of disable_pmksa_caching=1 prevents hostapd from adding PMKSA entries into its cache when a successful 802.1x authentication occurs. In practice RSN preauthentication would trigger a STA to perform authentication with other APs on the same SSID, it would then have its own supplicant PMKSA cache held. If a STA roams between one AP to another no new authenitcation would need to be performed as the new AP would already have authenticated the STA. The purpose of the PMKSA cache on the AP side would be for the AP to use the same PMKID for a STA when the STA roams off onto another BSSID and later comes back to it. Disabling Opportunistic Key Caching could help the reported issue as well but its not the correct place to address this. Opportunistic Key Caching enables an AP with different interfaces to share the PMKSA cache. Its a technical enhancement and disabling it would be useful to let a testing suite properly test for RSN preauthentication given that otherwise Opportunistic Key Caching would enable an interface being tested to derive its own derive the PMKSA entry. In production though okc=1 should be enabled to help with RSN preauthentication. The real fix for this particular issue outside of the scope of hostapd's configuration and it should not be dealt with as a workaround to its configuration and breaking expected RSN preauthentication and technical optimizations. Revert this change and enable users to pick and choose to enable or disable disable_pmksa_caching and okc expecting them to instead have read clearly more what these do. As for the core issure ported, the correct place to fix this is to enable a sort of messaging between the RADIUS server and its peers so that if caching for authentication is enabled that cache can be cleared upon user credential updates. Updating a user password (not just zapping a user) is another possible issue that would need to be resolved here. Another part of the solution might be to reduce the cache timing to account for any systematic limitations (RADIUS server not able to ask peers to clear cache might be one). [0] https://dev.openwrt.org/changeset/33359 [1] https://forum.openwrt.org/viewtopic.php?id=19596 [2] http://wireless.kernel.org/en/users/Documentation/hostapd#IEEE_802.11i.2FRSN.2FWPA2_pre-authentication [3] http://wireless.kernel.org/en/users/Documentation/wpa_supplicant#RSN_preauthentication [4] http://wiki.openwrt.org/doc/recipes/rsn_preauthentication Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> SVN-Revision: 38336
* hostapd: Add WPS unconfigured & WPS pin method supportFelix Fietkau2013-10-081-3/+13
| | | | | | | Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> SVN-Revision: 38335
* hostapd: Add eap_reauth_period config optionFelix Fietkau2013-10-081-0/+2
| | | | | | | | | | | | This adds the eap_reauth_period to be used for modifying the RADIUS server reauthentication authentication period, a parameter that gets passed directly to the hostapd configuration file. Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> SVN-Revision: 38334
* hostapd: add a build variant for wpa_supplicant with p2p (aka Wi-Fi Direct) ↵Felix Fietkau2013-08-081-0/+411
| | | | | | | | support Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37739
* hostapd: Settings for DAE/CoA serverFelix Fietkau2013-08-061-0/+7
| | | | | | | | | | | | | | | | | | | | | | hostapd supports "Dynamic Authorization Extensions", making it possible to forcibly disconnect a user by sending it a RADIUS "Disconnect-Request" packet. I've added three new variables to enable setting of the "radius_das_client" and "radius_das_port" variables in the hostapd configuration, which enable these extensions. * dae_client - IP of the client that can send disconnect requests * dae_secret - shared secret for DAE packets These are combined into the "radius_das_client" option in hostapd.conf To enable the server, both dae_client and dae_secret must be set. * dae_port - optional, default value is 3799 as specified in RFC 5176 Signed-off-by: Martijn van de Streek <martijn@vandestreek.net> SVN-Revision: 37734
* hostapd: truncate default mac file before adding entries to it (#13797)Jo-Philipp Wich2013-07-011-0/+2
| | | | SVN-Revision: 37114
* hostapd: correctly handle macfile uci optionJo-Philipp Wich2013-06-171-9/+24
| | | | | | | | | | | | | Make hostapd.sh correctly handle the macfile uci option. Such option specifies the macfile name to pass into the hostapd configuration file. Moreover, if a maclist option has been specified, copy the macfile before appending new entries. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> SVN-Revision: 36944
* hostapd: enable 802.11r for the -full variant (#13250)Felix Fietkau2013-05-031-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36533
* hostapd: initial prototype of an ubus bindingFelix Fietkau2013-03-172-0/+3
| | | | | | | Supports listing, removing and banning clients, and hooking into probe/assoc/auth requests via object subscribe. SVN-Revision: 36081
* use new button schemeJohn Crispin2013-03-131-0/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36004
* mac80211/hostapd: short_preamble is a per-vif option and should be enabled ↵Felix Fietkau2013-02-111-0/+4
| | | | | | by default SVN-Revision: 35565
* hostapd: don't configure wpa_supplicant with empty password="" if no ↵Jo-Philipp Wich2013-01-281-1/+1
| | | | | | password is specified (#12912) SVN-Revision: 35358
* wpa_supplicant.sh: always use parameters from the current sectionFelix Fietkau2012-12-161-7/+2
| | | | | | | | | | | | | | Using variables from the outer scope unnecessarily complicates the code and leads to issues. This patch fixes the bug when having an "adhoc" wifi-iface section before a "sta" section prevents wpa_supplicant from using the key specified in the corresponding section as it tries to use the "adhoc" key instead (1 by default). Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 34716
* mac80211, hostapd: Fix macfilter for multi bssid setupsFelix Fietkau2012-12-041-0/+21
| | | | | | | | | | | Previously only the first macfilter configuration would have been used on all interfaces. However, the configuration was always done per vif already. Hence, move the macfilter setup into hostapd.sh where and create one mac list file per vif. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> SVN-Revision: 34470
* packages: sort network related packages into package/network/Felix Fietkau2012-10-108-0/+1644
SVN-Revision: 33688
generated by cgit v1.1 at 2024-07-01 17:14:59 +0000