summaryrefslogtreecommitdiff
path: root/package/network/services
Commit message (Collapse)AuthorAgeFilesLines
* lldpd: add STOP=01 param in init scriptFelix Fietkau2015-12-051-1/+2
| | | | | | | | | | This should ensure that lldpd is among the first processes to stop, so that it has time to send the shutdown LLDPU to the other side, before the network goes down. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> SVN-Revision: 47786
* wpa-supplicant: Get 802.11s ssid information from option mesh_idJohn Crispin2015-11-241-0/+3
| | | | | | | | | | | | The scripts for authsae and iw use the option mesh_id to get set the "meshid" during a mesh join. But the script for wpad-mesh ignores the option mesh_id and instead uses the option ssid. Unify the mesh configuration and let the wpa_supplicant script also use the mesh_id from the configuration. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 47615
* authsae: Use kbit/s as mcast_rate unit like wpadJohn Crispin2015-11-241-2/+10
| | | | | | | | | | | | | | | The OpenWrt wireless configuration for mcast_rate is defined as Kbit/s when using wpa_supplicant for IBSS/802.11s and iw for unencrypted IBSS/802.11s. But when using authsae, the unit for the same option is redefined as Mbit/s. Better use the same unit for this option independent of the backend which is used. Old values for mcast_rate (< 1000) are still interpreted Mbit/s to avoid problems during upgrades from older versions. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 47614
* authsae: Fix meshid in authsae configJohn Crispin2015-11-241-1/+1
| | | | | | | | | The variable $mesh_id was never defined in authsae_start_interface and thus the option meshid in $authsae_conf_file was always set to "". Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 47613
* odhcpd: correctly handle netlink congestion caseSteven Barth2015-11-191-3/+3
| | | | | | | | Thanks to @ktgeek and @willmo for diagnosing Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 47514
* hostapd: Use network_get_device instead of uci_get_stateFelix Fietkau2015-11-113-5/+13
| | | | | | | | This fixes the IAPP functionality. Signed-off-by: Petko Bordjukov <bordjukov@gmail.com> SVN-Revision: 47455
* uhttpd: add support for configuration option ubus_corsLuka Perkov2015-11-101-0/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 47448
* openvpn: enable options consistency check even in the small buildFelix Fietkau2015-11-101-0/+12
| | | | | | | | | Only costs about 3k compressed, but significantly improves handling of configuration mismatch Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47439
* uhttpd: update to the latest version, adds support for redirect helper scriptsFelix Fietkau2015-11-082-3/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47419
* lldpd: implement a reload hookFelix Fietkau2015-11-031-1/+18
| | | | | | | | | | | | | | | | | | | Seems the default one is not working as expected. The way that reload should work is that the 'start' service call should return 1 (if lldpd is running) and then a normal restart would be called. However, for lldpd a reload would mean just clearing all custom TLVs (if they're configured) and reloading the configuration. So, this patch adds a reload hook, which would: - 'start' lldpd if it's not running (because we return 1 if not running) - reload configuration if it is running (also previously clearing custom TLVs if present) Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> SVN-Revision: 47367
* hostapd: add default value to eapol_version (#20641)Felix Fietkau2015-11-021-0/+1
| | | | | | | | | | | | | | r46861 introduced a new option eapol_version to hostapd, but did not provide a default value. When the option value is evaluated, the non-existing value causes errors to the systen log: "netifd: radio0: sh: out of range" Add a no-op default value 0 for eapol_version. Only values 1 or 2 are actually passed on, so 0 will not change the default action in hostapd. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 47361
* samba: convert init script to procd, add reload supportFelix Fietkau2015-10-301-6/+24
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47292
* relayd: update to the latest version, fixes some issues found by CoverityFelix Fietkau2015-10-301-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47285
* omcproxy: fix PKG_LICENSE stringJohn Crispin2015-10-261-1/+1
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 47264
* uhttpd: update to latest git HEADJohn Crispin2015-10-201-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47240
* uhttpd: update to latest git revisionJohn Crispin2015-10-192-2/+7
| | | | | | | | adds URL alias support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47206
* cosmetic: remove trailing whitespacesLuka Perkov2015-10-151-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 47197
* uhttpd: fix keep-alive bug (#20607, #20661)Jo-Philipp Wich2015-10-072-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The two commits 5162e3b0ee7bd1d0fd6e75e1ca7993a1834b5291 "allow request handlers to disable chunked reponses" and 618493e378e2239f0d30902e47adfa134e649fdc "file: disable chunked encoding for file responses" broke the chunked transfer encoding handling for proc responses in keep-alive connections that followed a file response with http status 204 or 304. The effect of this bug is that cgi responses following a 204 or 304 one where sent neither in chunked encoding nor with a content-length header, causing browsers to stall until the keep alive timeout was reached. Fix the logic flaw by inverting the chunk prevention flag in the client state and by testing the chunked encoding preconditions every time instead of once upon client (re-)initialization. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47161
* hostapd: wait longer for inactive client probe (empty data frame)Felix Fietkau2015-10-061-0/+11
| | | | | | | | | | | One second is not enough for some devices to ackowledge null data frame which is sent at the end of ap_max_inactivity interval. In particular, this causes severe Wi-Fi instability with Apple iPhone which may take up to 3 seconds to respond. Signed-off-by: Dmitry Ivanov <dima@ubnt.com> SVN-Revision: 47149
* lldpd: wrap procd command args in separate quotesJohn Crispin2015-10-051-3/+3
| | | | | | | | | | | | Seems the match pattern was being adapted from 'eth0' to ' eth0' because of the way I added the procd command args. This did not seem to be a problem when there were multiple interfaces, just on devices with single interfaces for lldpd to listen on. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> SVN-Revision: 47136
* openvpn: add handling for route-pre-down optionJohn Crispin2015-10-051-1/+1
| | | | | | | | | OpenVPN 2.3 added a route-pre-down option, to run a command before routes are removed upon disconnection. Signed-off-by: Jeffery To <jeffery.to@gmail.com> SVN-Revision: 47134
* hostapd: check for banned client on association eventRafał Miłecki2015-09-281-0/+26
| | | | | | | | | | | When using FullMAC drivers (e.g. brcmfmac) we don't get mgmt frames so check for banned client in probe request handler won't ever be used. Since cfg80211 provides us info about STA associating let's put a check there. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 47064
* igmpproxy: fix spurious restarts on interface events, pass used netdevs to ↵Felix Fietkau2015-09-261-1/+5
| | | | | | | | procd instead Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47055
* dropbear: add respawn param in case dropbear crashesFelix Fietkau2015-09-241-0/+1
| | | | | | Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> SVN-Revision: 47033
* package: Remove dependencies to kmod-ipv6Steven Barth2015-09-211-1/+1
| | | | | | | | | Since r46834, IPv6 support is builtin if selected. Therefor, dependencies on kmod-ipv6 can no longer be fulfilled, since it is not a module anymore. Signed-off-by: Arjen de Korte <arjen+openwrt@de-korte.org> SVN-Revision: 47022
* lldpd: add extra respawn paramsJohn Crispin2015-09-161-0/+3
| | | | | | Signed-off-by: Alexandru Ardelean <aa@ocedo.com> SVN-Revision: 46969
* lldpd: conversion of init script to procd formatJohn Crispin2015-09-161-13/+18
| | | | | | | | And add respawn param (the main reason for this conversion). Signed-off-by: Alexandru Ardelean <aa@ocedo.com> SVN-Revision: 46968
* lldpd: move /var/run creation + chmod earlierJohn Crispin2015-09-161-3/+3
| | | | | | Signed-off-by: Alexandru Ardelean <aa@ocedo.com> SVN-Revision: 46967
* lldpd: remove obsolete/unsupported lldpctl callJohn Crispin2015-09-161-5/+0
| | | | | | | | | | This call is no longer supported. Maybe a come-back for it would be to use a config /etc/lldpd.conf or /etc/lldpd.d/<some-file>.conf Signed-off-by: Alexandru Ardelean <aa@ocedo.com> SVN-Revision: 46966
* ppp: use more reliable way to set script environmentSteven Barth2015-09-152-2/+3
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46942
* omcproxy: use 100ms query response interval by defaultSteven Barth2015-09-151-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46940
* mac80211/hostapd: rework 802.11w driver support selection, do not hardcode ↵Felix Fietkau2015-09-142-1/+5
| | | | | | | | drivers in hostapd makefile Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46903
* hostapd: Add eapol_version config optionFelix Fietkau2015-09-111-1/+6
| | | | | | | | | | | | | Add eapol_version to the openwrt wireless config ssid section. Only eapol_version=1 and 2 will get passed to hostapd, the default in hostapd is 2. This is only useful for really old client devices that don't accept eapol_version=2. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> SVN-Revision: 46861
* openvpn: remove __DATE__ from options outputFelix Fietkau2015-09-111-0/+10
| | | | | | | | | reported by: https://reproducible.debian.net/openwrt/dbd/ar71xx/base/openvpn-nossl_2.3.7-1_ar71xx.ipk.html Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 46860
* hostapd: work around unconditional libopenssl build dependencyFelix Fietkau2015-09-111-1/+1
| | | | | | | | | | | As the OpenWrt build system only resolves build dependencies per directory, all hostapd variants were causing libopenssl to be downloaded and built, not only wpad-mesh. Fix this by applying the same workaround as in ustream-ssl. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 46851
* linux: make IPv6 builtin if selected (saves >30KB)Steven Barth2015-09-091-1/+0
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46834
* package: replace ifconfig-usage with ipSteven Barth2015-09-081-1/+1
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46832
* dropbear: remove generation and configuration of DSS keysSteven Barth2015-09-082-9/+4
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46815
* dropbear: disable 3des, cbc mode, dss support, saves about 5k gzippedFelix Fietkau2015-09-081-1/+20
| | | | | | | | | While technically required by the RFC, they are usually completely unused (DSA), or have security issues (3DES, CBC) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46814
* Disable telnet in favor of passwordless SSHSteven Barth2015-09-074-1/+41
| | | | | | | | | | This enables passworldless login for root via SSH whenever no root password is set (e.g. after reset, flashing without keeping config or in failsafe) and removes telnet support alltogether. Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46809
* uhttpd: update to the latest version, fixes deferred cgi script processing ↵Felix Fietkau2015-09-071-2/+2
| | | | | | | | (#20458) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46807
* odhcpd: fix parsing of host entries without duidSteven Barth2015-09-071-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46803
* odhcpd: various bugfixesSteven Barth2015-09-071-2/+2
| | | | | | | | | | * ra: don't announce as default router if we aren't (regression) * ra: reduce maximum announced dns lifetimes due to buggy clients * dhcpv6: fix mac-based lease-matching Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46802
* comgt/umbim/uqmi: enable RFC 7278 for 3g/4g by defaultSteven Barth2015-09-031-0/+1
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46780
* mdns: update to the latest version, fixes a spurious build errorFelix Fietkau2015-09-031-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46778
* dnsmasq: make /tmp/dnsmasq.d and /tmp/hosts preferred over UCI settingsSteven Barth2015-09-022-5/+5
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46770
* dropbear: bump to 2015.68Steven Barth2015-09-027-12/+12
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46769
* mdns: fix having mulitple network entries in uciFelix Fietkau2015-09-021-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46764
* odhcpd: fix incorrect address assignment for DHCPv6Steven Barth2015-09-011-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 46761
* hostapd: properly enable 802.11w supportFelix Fietkau2015-08-271-1/+1
| | | | | | | | | | | Add CONFIG_IEEE80211W variable to DRIVER_MAKEOPTS so that 802.11w support is properly compiled in full variant. This fixes #20179 Signed-off-by: Janusz Dziemidowicz <rraptorr@nails.eu.org> SVN-Revision: 46737
generated by cgit v1.1 at 2024-12-03 15:27:03 +0000