summaryrefslogtreecommitdiff
path: root/package/switch
Commit message (Collapse)AuthorAgeFilesLines
* switch: warn if ndo_do_ioctl is not implemented in the Ethernet driverHauke Mehrtens2012-09-221-0/+4
| | | | SVN-Revision: 33506
* switch: improve error messageHauke Mehrtens2012-09-191-4/+9
| | | | SVN-Revision: 33464
* switch: clean up robo switch driverHauke Mehrtens2012-08-051-98/+42
| | | | | | | | | | * remove use_et, all supported drivers are using mii ioctls * remove robo.phy_addr, phy_addr was always set to ROBO_PHY_ADDR. * remove support for old kernel versions * do_ioctl is allways called with buff == NULL * use if_mii SVN-Revision: 33002
* brcm47xx: use libgpio instaed of implementing the gpio interface ourself.Hauke Mehrtens2012-08-043-79/+24
| | | | SVN-Revision: 32992
* switch: the hardware must be up while configuring Since the removal of the ↵Jo-Philipp Wich2012-03-132-2/+3
| | | | | | interface coldplug hack the timing changed in such a way that eth0 is not up during switch setup, leading to an inaccesible device. Bring up the switch interface before configuring it to mitigate the problem. SVN-Revision: 30937
* switch: fix some memory leaks in switch_parse_vlan()Hauke Mehrtens2012-01-283-7/+8
| | | | SVN-Revision: 29936
* switch: update for brcm47xx targetHauke Mehrtens2011-08-047-102/+83
| | | | | | | * remove suport for 2.4 kernel * add support for bcma bus SVN-Revision: 27904
* switch: fix switch-robo device reference countingFlorian Fainelli2011-02-202-7/+16
| | | | | | | | Fix incorrect device reference counting by switch-robo. Signed-off-by: George Kashperko <george@znau.edu.ua> SVN-Revision: 25619
* remove whitespaces in kmod-switch sourcesFlorian Fainelli2010-07-203-56/+56
| | | | SVN-Revision: 22320
* massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950Claudio Mignanti2010-07-121-3/+3
| | | | SVN-Revision: 22145
* remove linux 2.4 support from several packagesFelix Fietkau2010-06-264-27/+3
| | | | SVN-Revision: 21954
* switch: explicitely clear port mappings in unsused vlans (#7082)Jo-Philipp Wich2010-04-052-1/+7
| | | | SVN-Revision: 20717
* switch: suppress boot error message on 2.4Nicolas Thill2010-03-011-2/+2
| | | | SVN-Revision: 19922
* switch: eliminate the asterisk from the switch port configuration and set it ↵Jo-Philipp Wich2010-02-281-1/+9
| | | | | | automatically on the first vlan, this aligns the broadcom vlan config with the swconfig format SVN-Revision: 19909
* switch: do not include linux/autoconf.h (#6513)Florian Fainelli2010-02-283-3/+0
| | | | SVN-Revision: 19903
* change switch config to swconfig style format to remain consistent accross ↵Jo-Philipp Wich2009-11-151-25/+30
| | | | | | platforms SVN-Revision: 18425
* fix breakage on wl500gp after r18214, thanks sn9 (#6084)Florian Fainelli2009-11-031-2/+2
| | | | SVN-Revision: 18289
* make etehrent work on wrt350n, thx sn9John Crispin2009-10-291-2/+25
| | | | SVN-Revision: 18214
* add patches for kernel 2.6.31Hauke Mehrtens2009-09-261-0/+4
| | | | | | This is completly untested. Only a compile tests with the default config was done! SVN-Revision: 17734
* fix oops in switch-robo on brcm63xx, thanks to Daniel Dickinson (#5053)Florian Fainelli2009-05-051-1/+1
| | | | SVN-Revision: 15611
* prevent kmod-switch from accessing nvram on brcm63xx (#5035)Florian Fainelli2009-05-021-1/+5
| | | | SVN-Revision: 15555
* fix nvram_get checking on non-WGT634U (#4975)Florian Fainelli2009-04-211-1/+2
| | | | SVN-Revision: 15319
* fix strange LED behavior with Netgear WGT634U (#3552)Florian Fainelli2009-04-202-3/+7
| | | | SVN-Revision: 15290
* get rid of $Id$ - it has never helped us and it has broken too many patches ;)Felix Fietkau2009-04-174-4/+0
| | | | SVN-Revision: 15242
* allow kmod-switch to be used on brcm63xx (#4599)Florian Fainelli2009-03-093-4/+14
| | | | SVN-Revision: 14825
* switch: remove message about BFL_ENETADM not being set on systems with a ↵Felix Fietkau2008-11-021-3/+2
| | | | | | roboswitch SVN-Revision: 13100
* (4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registeredFelix Fietkau2008-06-153-1/+19
| | | | | | | | | | | | This patch prevents switch-robo.c from attempting robo_probe on a port that is already registered. robo_probe will adjust kernel reference counts if it detects a switch on the port. If this patch wasn't applied, the wrt350n would hang on reboot, waiting for the network driver reference count to reach zero indefinitely. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> SVN-Revision: 11469
* Stopgap compilation fixes for diag and switch under 2.6.25Peter Denison2008-05-201-0/+4
| | | | SVN-Revision: 11231
* Allow package/switch to compile against 2.6.25Peter Denison2008-05-141-0/+4
| | | | SVN-Revision: 11138
* Check the return values of kmalloc()Michael Büsch2008-03-131-6/+25
| | | | SVN-Revision: 10599
* fix switch-robo.c compile errors on linux 2.4Felix Fietkau2008-03-011-0/+4
| | | | SVN-Revision: 10539
* Fix the roboswitch code for the WRT350NMichael Büsch2008-02-273-80/+186
| | | | SVN-Revision: 10531
* ssb: Make the GPIO API reentrancy safe.Michael Büsch2008-02-191-22/+7
| | | | SVN-Revision: 10496
* export switch-core.h to $(STAGING_DIR)Felix Fietkau2008-01-061-1/+10
| | | | SVN-Revision: 10138
* fix adm switch misdetection, which led to bogus button events that caused ↵Felix Fietkau2007-11-161-6/+6
| | | | | | the system to shut down SVN-Revision: 9555
* major target cleanup. it is now possible to have subtargets that can ↵Felix Fietkau2007-09-081-1/+1
| | | | | | override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets SVN-Revision: 8694
* fix board name for nvram and switch packages on brcm-2.4 after [8653]Nicolas Thill2007-09-071-5/+5
| | | | SVN-Revision: 8664
* move package description to a separate definition, remove it when ↵Nicolas Thill2007-09-071-2/+4
| | | | | | DESCRIPTION=TITLE SVN-Revision: 8659
* strip the kernel version suffix from target directories, except for brcm-2.4 ↵Felix Fietkau2007-09-061-1/+1
| | | | | | (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles. SVN-Revision: 8653
* package Makefile cleanup: remove uneeded varsNicolas Thill2007-09-031-2/+0
| | | | SVN-Revision: 8587
* use a default VERSION field for kmod packagesNicolas Thill2007-09-021-1/+0
| | | | SVN-Revision: 8575
* fix kmod-switch compile on brcm-2.4 (#1461)Felix Fietkau2007-03-142-12/+12
| | | | SVN-Revision: 6565
* fix up remaining parts for the brcm47xx-2.6 port (tested on wgt634u), nuke ↵Felix Fietkau2007-03-141-10/+0
| | | | | | the old brcm-2.6 port, close #1312, #1451 SVN-Revision: 6564
* add diag and switch support for brcm47xx-2.6Felix Fietkau2007-03-144-58/+118
| | | | SVN-Revision: 6562
* cleanup, nuke obsolete 'Kernel drivers' category, convert remaining kmod ↵Felix Fietkau2007-01-201-10/+9
| | | | | | packages to KernelPackage interface SVN-Revision: 6136
* fix memory leak in switch drivers (patch from #1132)Felix Fietkau2007-01-071-0/+1
| | | | SVN-Revision: 6011
* Fix the counters bug (#983)Florian Fainelli2006-12-271-1/+1
| | | | SVN-Revision: 5910
* prepare packages for kernel upgrade to 2.6.19Felix Fietkau2006-12-143-3/+3
| | | | SVN-Revision: 5786
* Add Trendware TEW-411BRplus (#1038)Florian Fainelli2006-12-111-1/+10
| | | | SVN-Revision: 5764
* replace lots of manual install commands with INSTALL_* variablesFelix Fietkau2006-11-231-4/+4
| | | | SVN-Revision: 5624