summaryrefslogtreecommitdiff
path: root/target/linux/adm5120/files/arch
Commit message (Expand)AuthorAgeFilesLines
* adm5120: use enum for MACH_ADM5120_ definitionsGabor Juhos2010-01-021-46/+48
* adm5120: nuke adm5120_mach_type, use mips_machtype insteadGabor Juhos2010-01-024-11/+8
* adm5120: split bootext partition on the ZyXEL P-33x boardsGabor Juhos2010-01-021-4/+8
* adm5120: move early-printk support into a separate fileGabor Juhos2010-01-023-16/+31
* adm5120: merge 2.6.30+ specific patchesGabor Juhos2010-01-022-3/+6
* adm5120: use the generic image_cmdline hackGabor Juhos2009-09-101-3/+7
* show SoC parameters in /proc/cpuinfoGabor Juhos2009-06-251-7/+13
* add support for the OSBRiDGE 5GXi/5XLi (thanks to Mattia Aracne for the board)Gabor Juhos2009-06-255-1/+89
* switch to 2.6.28Gabor Juhos2009-04-2619-0/+1628
* enable CAS-630/630W supportGabor Juhos2009-02-081-2/+0
* nfs-101u: add PCI IRQ map for the NEC USB controller (thanks to Daniel Schmit...Gabor Juhos2009-02-021-2/+9
* NFS-101U/WU: add PCI irq map and change vlan mapGabor Juhos2009-01-131-4/+15
* use mips_machine codeGabor Juhos2008-12-0633-142/+76
* experimental support for 2.6.27Gabor Juhos2008-10-0560-0/+4457
* remove 2.6.25 specific stuffGabor Juhos2008-09-1329-3696/+0
* fix gpio number of the reset button Compex WP54 boardsGabor Juhos2008-08-131-1/+1
* add alternative board id for the ZyXEL P-334WTGabor Juhos2008-08-071-4/+5
* experimental gpiodev support (closes #3613)Gabor Juhos2008-08-057-0/+61
* add missing buttons device for RB-1xx boards, thanks to Christophe LucasGabor Juhos2008-08-041-1/+3
* make use DMA_BIT_MASKGabor Juhos2008-07-281-4/+4
* make boot quiet a bitGabor Juhos2008-07-261-6/+6
* use __raw_{readl,writel} routines in the GPIO codeGabor Juhos2008-06-221-4/+4
* IRQ code cleanupGabor Juhos2008-06-171-26/+32
* add button devices to several boardsGabor Juhos2008-06-084-15/+66
* make use the chip_fixup function of the plat_nand driverGabor Juhos2008-06-061-1/+12
* improve support of the Infineon EASY 5120-RT Reference BoardGabor Juhos2008-05-011-1/+16
* fix a bug in the GPIO codeGabor Juhos2008-04-071-3/+3
* switch to 2.6.24Gabor Juhos2008-02-093-19/+0
* add preliminary support for 2.6.24Gabor Juhos2008-01-302-2/+9
* don't use mips_machgroupGabor Juhos2008-01-301-1/+0
* more license cleanupsGabor Juhos2008-01-2912-172/+58
* add experimental support for the Cellvision NFS-101U deviceGabor Juhos2008-01-292-0/+29
* license cleanupGabor Juhos2008-01-2913-176/+39
* convert Cellvision board structuresGabor Juhos2008-01-251-37/+19
* use reset function on the NP28G boardsGabor Juhos2007-12-271-0/+1
* change switch register access macrosGabor Juhos2007-12-274-14/+14
* fix compiler warningGabor Juhos2007-12-261-2/+0
* revert [9788], the ADM5120 datasheet v1.16 contains bad valuesGabor Juhos2007-12-171-4/+2
* remove invalid GPIO definitions for the RB153Gabor Juhos2007-12-171-18/+5
* fix level setup code for GPIO IRQsGabor Juhos2007-12-171-2/+2
* add support for LEDs on the NP28G board, thanks to kenny (closes: #2825)Gabor Juhos2007-12-161-4/+23
* use a shadow value for the write-only GPIO_CONF2 registerGabor Juhos2007-12-121-16/+10
* fix mac address setup on RouterBOARDsGabor Juhos2007-12-122-15/+9
* enable wait state pin for the CF slot on the RB153 boardGabor Juhos2007-12-112-1/+5
* new experimental driver for the CF slot on the RouterBOARD 153Gabor Juhos2007-12-111-10/+8
* add support for GPIO IRQsGabor Juhos2007-12-103-43/+85
* Setup MAC addresses for routerboardsFlorian Fainelli2007-12-092-2/+13
* RB153 must use the generic RB1xx's setup codeGabor Juhos2007-11-031-1/+1
* CF driver cleanupFlorian Fainelli2007-11-011-1/+19
* minor cleanupsGabor Juhos2007-10-247-228/+118
generated by cgit v1.1 at 2024-12-14 09:53:12 +0000