summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/files
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: use spinlock in ar71xx_device_{start,stop}Gabor Juhos2011-01-081-18/+20
| | | | SVN-Revision: 24929
* ar71xx: enable ar7240 switch support on the UBNT NanoStation M Fixes ↵Felix Fietkau2010-12-191-0/+1
| | | | | | | | broadcast frames on the second ethernet MAC Signed-off-by: Alexander Couzens <lynxis@c-base.org> SVN-Revision: 24723
* ar71xx: remove stray semicolonsGabor Juhos2010-12-171-2/+2
| | | | SVN-Revision: 24651
* ar71xx: fix WLAN LEDs on the DIR-825 boardGabor Juhos2010-12-171-0/+3
| | | | SVN-Revision: 24650
* ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boardsGabor Juhos2010-12-173-14/+36
| | | | SVN-Revision: 24649
* ar71xx: UBNT Secondary MAC address duplicate fixGabor Juhos2010-12-171-2/+13
| | | | | | | | | | | | | There is Secondary MAC address duplicate problem with some UBNT RouterStation and RouterStation Pro HW batches as Primary MAC addresses are not increased by 2 per device in board data. Fix is to use 'Locally Administrated bit' for Secondary MAC address instead of increasing Primary MAC addresses by 1 which could overlap with other device Primary MAC address. Signed-off-by: Kestutis Barkauskas<keba@devint.net> SVN-Revision: 24643
* ar71xx: add wlan led for the TL-WR941NDGabor Juhos2010-12-151-0/+5
| | | | SVN-Revision: 24612
* ar71xx: UBNT M-Series MAC address fixGabor Juhos2010-12-151-3/+4
| | | | | | | | | UBNT M-Series devices have 2 MAC addresses in board data. Fix is to use both entries from board data instead of one entry. Signed-off-by: Kestutis Barkauskas<keba@devint.net> SVN-Revision: 24611
* ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boardsGabor Juhos2010-12-141-3/+16
| | | | SVN-Revision: 24569
* ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boardsGabor Juhos2010-12-142-0/+15
| | | | SVN-Revision: 24568
* ar71xx: add missing files for the JA76PF boardGabor Juhos2010-12-101-0/+96
| | | | SVN-Revision: 24444
* ar71xx: add support for the jjPlus JA79PFGabor Juhos2010-12-103-0/+11
| | | | | | Patch-by: Cezary Jackiewicz SVN-Revision: 24440
* ar71xx: add support for the TP-LINK TL-MR3220 v1 boardGabor Juhos2010-12-104-38/+42
| | | | SVN-Revision: 24439
* ar71xx: work around a PCI controller bug which causes reads to the ↵Felix Fietkau2010-12-041-0/+10
| | | | | | PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues SVN-Revision: 24236
* ar71xx: D-Link DIR-825 B1 eth1 MAC address is garbageGabor Juhos2010-11-191-1/+1
| | | | | | | | | r22700 contained a copy-and-paste error that set eth0's MAC address twice and never set eth1's. Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 24036
* ar71xx: drivers/ar71xx_wdt: fix size argument passed to copy_to_user()Gabor Juhos2010-11-121-1/+1
| | | | | | Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23983
* ar71xx: drivers/ag71xx: remove deprecated usage of IRQF_SAMPLE_RANDOMGabor Juhos2010-11-121-1/+1
| | | | | | Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23982
* ar71xx: use pr_* functions in driversGabor Juhos2010-11-122-10/+4
| | | | | | Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23981
* ar71xx: drivers/rb4xx_nand: remove C++ comment usageGabor Juhos2010-11-121-1/+3
| | | | | | Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23980
* ar71xx: return statements does not need parenthesisGabor Juhos2010-11-123-8/+8
| | | | | | Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23979
* ar71xx: fix inline attribute locationGabor Juhos2010-11-123-6/+6
| | | | | | Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23978
* ar71xx: wrap long linesGabor Juhos2010-11-1210-19/+29
| | | | | | | | (build errors has been fixed - juhosg) Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23977
* ar71xx: fix trailing statements locationGabor Juhos2010-11-122-4/+8
| | | | | | Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23976
* ar71xx: fix whitespaces nitsGabor Juhos2010-11-1258-340/+340
| | | | | | | | (build error has been fixed - juhosg) Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> SVN-Revision: 23975
* Add support for Ubiquiti UniFi APClaudio Mignanti2010-11-062-0/+38
| | | | SVN-Revision: 23904
* ar71xx: Set eth1 MAC address from EEPROM for WNDR3700Felix Fietkau2010-11-041-2/+7
| | | | | | | | | | | | | The WNDR3700's art/caldata partition contains three MAC addresses at offsets 0, 6, and 12, used for eth0/wlan0 (shared), eth1, and wlan1, respectively. The existing code configures eth1's MAC address by adding 1 to eth0's instead of using the value stored in the EEPROM. This patch causes the stored value to be used directly. (On my WNDR3700s, the three stored addresses are all sequential anyway.) Signed-off-by: Mark Mentovai <mark@moxienet.com> SVN-Revision: 23876
* ar71xx: fix the wndr3700 antenna group setting for the first wireless chip ↵Felix Fietkau2010-11-041-1/+1
| | | | | | (thx, Mark Mentovai) SVN-Revision: 23875
* ar71xx: improve the wndr3700 quirks - move most of the code out of ath9k and ↵Felix Fietkau2010-11-034-12/+39
| | | | | | instead allow the platform device to specify gpio overrides - fixes 5ghz signal strength issues SVN-Revision: 23822
* ar71xx: the ar7240 dsa driver is no longer used, remove it.Felix Fietkau2010-10-212-863/+0
| | | | SVN-Revision: 23577
* ar71xx: use the new ar7240 switch driver for tl-wa901nd as wellFelix Fietkau2010-10-212-14/+1
| | | | SVN-Revision: 23576
* ar71xx: fix more section mismatchesFelix Fietkau2010-10-214-9/+9
| | | | SVN-Revision: 23575
* ar71xx: improve 2.6.36 compatibility. also, instead of adding a forward port ↵Felix Fietkau2010-10-213-8/+8
| | | | | | patch to the 2.6.36 patches, add a backport patch to 2.6.32 SVN-Revision: 23574
* remove remaining references to dev-ap91-eth.h, patch by Stijn TintelJo-Philipp Wich2010-10-141-1/+0
| | | | SVN-Revision: 23451
* ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new ↵Felix Fietkau2010-10-147-102/+15
| | | | | | switch driver SVN-Revision: 23439
* ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)Felix Fietkau2010-10-141-1/+18
| | | | SVN-Revision: 23432
* ar71xx: increase rb4xx nand kernel partition size (patch by danimo)Felix Fietkau2010-10-071-1/+1
| | | | SVN-Revision: 23293
* ar71xx: initial support for jjPlus JWAP003Gabor Juhos2010-10-014-0/+91
| | | | | | | | | Patch-by: Cezary Jackiewicz <cezary@eko.one.pl> (the GPIODEV code has been removed, the sysfs interface can be used to control the GPIO lines instead - juhosg) SVN-Revision: 23165
* AP96: Fix LAN/WAN setupFelix Fietkau2010-09-281-4/+8
| | | | | | | | | LAN (eth0) is behind a switch and the fixed speed/duplex was supposed to be for it, not WAN (eth1). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> SVN-Revision: 23147
* ar71xx: add support for the TL-MR3420 v1 boardGabor Juhos2010-09-274-0/+160
| | | | SVN-Revision: 23136
* ar71xx: AR724[12] requires different USB setupGabor Juhos2010-09-272-11/+27
| | | | SVN-Revision: 23135
* ar71xx: use the MDIO interface of the 2nd MAC on the ar7241Gabor Juhos2010-09-271-0/+6
| | | | SVN-Revision: 23132
* ar71xx: move ath9k specific PCI fixup into a separate fileGabor Juhos2010-09-276-148/+140
| | | | SVN-Revision: 23131
* ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCsGabor Juhos2010-09-271-1/+14
| | | | | | | With this change ath9k can handle the wireless chip on the TL-WR841N v7 board which is based on the AR7241 SoC. SVN-Revision: 23130
* Add support for Atheros AP96 reference boardFelix Fietkau2010-09-274-0/+186
| | | | | | | | | | | | This is still preliminary and not really tested much. Anyway, this version seems to be enough to get both wired and wireless interfaces working. Buttons and leds are also working. mach-ap96.c is based on mach-wndr3700.c. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> SVN-Revision: 23125
* ar71xx: select AR71XX_DEV_DSA when AR71XX_DEV_AP91_ETH is selected, do not ↵Felix Fietkau2010-09-051-2/+1
| | | | | | select AR71XX_DEV_AP91_ETH for TL-WA901ND and TL-WR741ND SVN-Revision: 22935
* ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boardsGabor Juhos2010-09-034-1/+223
| | | | SVN-Revision: 22882
* ar71xx: rewrite SPI drivers for the RB4xx boardsGabor Juhos2010-08-315-367/+1172
| | | | | | | | | | * add a new SPI controller driver * add SPI driver for the CPLD chip * convert the NAND driver * enable the mikroSD slot * enable more LEDs SVN-Revision: 22863
* ar71xx: change mac address initializationGabor Juhos2010-08-1831-61/+101
| | | | SVN-Revision: 22700
* ar71xx: add a new driver for the ar7240 switch using swconfig. hooks ↵Felix Fietkau2010-08-166-3/+893
| | | | | | directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563 SVN-Revision: 22675
* ar71xx: remove the fifo cfg overrides for the ap91 ethernet code - these ↵Felix Fietkau2010-07-271-6/+0
| | | | | | values have been wrong on every single device i've tested, falling back to the atheros values seems to be the right thing to do SVN-Revision: 22401
generated by cgit v1.1 at 2024-11-08 13:49:12 +0000