summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/files
Commit message (Expand)AuthorAgeFilesLines
...
* ar71xx: ag71xx: use NETDEV_TX_OKGabor Juhos2010-03-022-4/+5
* ar71xx: use COMMAND_LINE_SIZEGabor Juhos2010-03-021-1/+1
* ar71xx: register DSA switch for the AP91 based boardsGabor Juhos2010-03-011-0/+16
* ar71xx: add DSA driver for the AR7240 built-in ethernet switchGabor Juhos2010-03-011-0/+736
* ar71xx: add QinQ tagging format for the DSA driverGabor Juhos2010-03-011-0/+127
* ar71xx: register RTL8366RB switch on the TL-WR1043NB boardGabor Juhos2010-02-241-3/+22
* ar71xx: fix pll value for the eth0 interface on the TL-WR1043ND boardGabor Juhos2010-02-241-0/+1
* ar71xx: enable TX/RX flow control on the AR7240Gabor Juhos2010-02-241-1/+6
* ar71xx: fix mac addresses on the DIR-600 rev. A1 boardGabor Juhos2010-02-192-2/+13
* ar71xx: fix wireless mac address on the TL-WR741NDGabor Juhos2010-02-191-1/+1
* ar71xx: move AP91 specific ethernet initialization into a separate fileGabor Juhos2010-02-196-49/+71
* ar71xx: add missing GPIO LED for the WNDR3700 boardGabor Juhos2010-02-191-0/+5
* ar71xx: fix polarity of GPIO buttons on the WNDR3700 boardGabor Juhos2010-02-191-0/+3
* ar71xx: fix WLAN mac address on the TL-WR1043NDGabor Juhos2010-02-101-1/+1
* ar71xx/mac80211: add a workaround for the bad signal strength on the WNDR3700Gabor Juhos2010-02-094-6/+18
* ar71xx: add missing fields to the ar71xx-ehci driverGabor Juhos2010-02-061-1/+7
* rtl8366: make it available on all platformsGabor Juhos2010-01-254-2069/+0
* rtl8366s: simplify mib counters handlingGabor Juhos2010-01-251-58/+48
* ar71xx: merge generic machine code into setup.cGabor Juhos2010-01-254-28/+8
* rtl8366_smi: move RTL8366S driver into a separate fileGabor Juhos2010-01-227-1742/+1787
* rtl8366_smi: rename rtl8366s specific functions and definitionsGabor Juhos2010-01-221-175/+173
* rtl8366_smi: move chip specific stuff into its own structGabor Juhos2010-01-221-192/+224
* rtl8366_smi: separate gpio initializationGabor Juhos2010-01-221-25/+46
* rtl8366_smi: store GPIO numbers directly in the rtl8366_smi structGabor Juhos2010-01-221-22/+21
* rtl8366_smi: store device pointer instead of plaform_deviceGabor Juhos2010-01-221-19/+19
* rtl8366_smi: rename switch attribute handlersGabor Juhos2010-01-211-59/+59
* rtl8366_smi: simplify rtl8366_attr_get_port_link functionGabor Juhos2010-01-201-52/+33
* rtl8366_smi: make rtl8366_phy_config_{aneg,init} staticGabor Juhos2010-01-201-2/+2
* rtl8366_smi: simplify rtl8366_{get,set}_port_vlan_index functionsGabor Juhos2010-01-201-39/+21
* rtl8366_smi: minor code optimalizationsGabor Juhos2010-01-201-8/+7
* rtl8366_smi: coding style cleanupGabor Juhos2010-01-201-102/+119
* rtl8366_smi: add Kconfig option for the debugfs stuffGabor Juhos2010-01-201-7/+5
* rtl8366_smi: fix error checking in rtl8366s_set_vlan_4k_entryGabor Juhos2010-01-201-5/+5
* rtl8366_smi: fix parameter checking in rtl8366_attr_get_vlan_infoGabor Juhos2010-01-201-1/+1
* rtl8366_smi: fix return codes in rtl8366s_reset_vlanGabor Juhos2010-01-201-7/+11
* rtl8366_smi: move variable initialization out from the loopGabor Juhos2010-01-201-5/+5
* rtl8366_smi: fix port->flags calculation in rtl8366_get_portsGabor Juhos2010-01-201-1/+2
* ar71xx: fix ethernet mac address on the WZR-HP-G300NHGabor Juhos2010-01-181-1/+3
* rtl8366_smi: use inline function instead of a macro on top of container_ofGabor Juhos2010-01-181-17/+20
* rtl8366_smi: reset the vlan table when resetting the switch and use vlan get/...Felix Fietkau2010-01-181-84/+48
* rtl8366_smi: fix excessive stack usage and buffer handling bugsFelix Fietkau2010-01-181-50/+52
* ar71xx: fix return statement in the rtl8366 driverFelix Fietkau2010-01-171-1/+1
* rtl8366_smi: register the switch directly from the probe routineGabor Juhos2010-01-171-21/+36
* rtl8366_smi: use vlanmc name for all vlanconfig variablesGabor Juhos2010-01-171-61/+60
* rtl8366_smi: use vlan4k name for all vlan4kentry variablesGabor Juhos2010-01-171-26/+26
* rtl8366_smi: move memset into the rtl8366s_get_member_config functionGabor Juhos2010-01-171-10/+3
* rtl8366_smi: move memset into the rtl8366s_get_vlan_4k_entry functionGabor Juhos2010-01-171-6/+1
* rtl8366_smi: add vid parameter to the rtl8366s_get_vlan_4k_entry functionGabor Juhos2010-01-171-16/+8
* ar71xx: upgrade rtl8366_smi driverGabor Juhos2010-01-171-75/+1434
* ar71xx: fix phy interface selection for the RB-450GGabor Juhos2010-01-171-2/+2
generated by cgit v1.1 at 2024-11-05 23:59:33 +0000