summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/files
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add kernel support for the OpenMesh MR900 boardJohn Crispin2014-11-141-0/+158
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43258
* ar71xx: add support for Netgear WNR2000v4John Crispin2014-11-031-0/+175
| | | | | | Signed-off-by: Michaël Burtin <mburtin@gmail.com> SVN-Revision: 43173
* ar71xx: add support for buffalo WZR-450HP2Felix Fietkau2014-10-221-0/+221
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43026
* wr1043nd-v2: Change .code of the wi-fi button to KEY_RFKILLJohn Crispin2014-10-141-4/+4
| | | | | | | | | | | | This patch changes the code of the Wi-Fi On/Off button on the TP-Link WR1043ND v2 from KEY_WLAN to KEY_RFKILL (and renames a few constants to match). The reason for this change is, that the KEY_WIFI button code is not recognized by the hotplug subsystem. This means that the userspace is not notified about the button being pressed which effectively renders it useless. Signed-off-by: Josef Gajdusek <atx@atx.name> SVN-Revision: 42922
* ar71xx: Fix LED definitions for the DRAGINO2 boardJohn Crispin2014-10-141-17/+26
| | | | | | | | | | | | | | This patch fixes LED definitions for the DRAGINO2 board. 1. It renames the Router/USB led to System, as it is now marked "SYS" on the board. 2. It gives control of the LAN and WAN leds and some other GPIOs to Linux. 3. It fixes the active_low property for the LAN and WAN leds. 4. It sets up WLAN, LAN and WAN leds in the UCI defaults. 5. It allows usage of the System led by the diag.sh script, so it will be used to indicate boot and failsafe status. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 42897
* ar71xx: fix reset button gpio for OM2P/OM2P-HSJohn Crispin2014-10-061-1/+1
| | | | | | | | | | | A typo in the definition for the OM2P reset button disabled its functionality in OpenWrt. The actual button for these two devices is "1" and not "11". Signed-off-by: Oren Poleg <oren@poleg.org> [sven@open-mesh.org: added a commit subject+message] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 42782
* ar71xx: add qihoo 360 c301 router supportJohn Crispin2014-09-151-0/+166
| | | | | | | | | | | | | | | Qihoo 360 C301 is a dual band wireless router supports 802.11n and 802.11ac. Its chipset is AR9344 + AR9882 with two 16MB flashes. This patch adds its initial support. v2: * use mtd_get_mac_ascii to fetch MAC address for ath10k. * use ath79_register_pci to initialize AR9882. Signed-off-by: Weijie Gao <hackpascal@gmail.com> SVN-Revision: 42552
* ar71xx: ack completed tx descriptors only after the full frame has been ↵Felix Fietkau2014-09-101-10/+16
| | | | | | | | completed Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42457
* ath79: dev-eth: Don't advertise 1gbit in link code word on ar9331Felix Fietkau2014-09-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | While the AR9331 has a gigabit MAC towards the internal switch, the integrated PHYs however are only 100-base-tx capable. The existing code however advertieses gigabit capability in the link status word. If you attach such a PHY to a gigabit capable switch on the remote end, with some probability it attempts to negotiate gigabit and fails, falling baco to the AR9331 assuming a 10mbit half-duplex link. This has been observed quite frequently with the Carambola2 and gigabit capable switches. In ath79_register_eth(), "pdata->has_gbit = 1;" is set unconditionally for both AR9331 ethernet ports. This is most likely wrong. Despite the two MAC IP cores being gigabit MACs, the MAC for eth1 is connected to a 100base-T PHY via MII. The has_gbit attribute is used in the ethernet driver to determine the supported link modes. So either pdata->has_gbit is not set to 1 anymore, or the ethernet driver needs to be modified to determine the advertised link code word on another criteria than pdata->has_gbit. This patch implements the former solution. Signed-off-by: Harald Welte <laforge@gnumonks.org> SVN-Revision: 42432
* ar71xx: re-enable descriptor splitting on ar716x after the previous bugfixes ↵Felix Fietkau2014-09-061-2/+0
| | | | | | | | (#13072) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42429
* ar71xx: fix off-by-one error in packet descriptor splitting (patch from #13072)Felix Fietkau2014-09-061-1/+6
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42428
* ar71xx: on ar716x, split ethernet packets in 512 byte chunks instead of 256 ↵Felix Fietkau2014-09-061-1/+1
| | | | | | | | (improves performance) (patch from #13072) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42427
* ar71xx: disable ethernet descriptor splitting for now, as it seems to cause ↵Felix Fietkau2014-08-301-0/+2
| | | | | | | | tx hangs in some setups Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42333
* ar71xx: split packets into multiple descriptors on ar716xFelix Fietkau2014-08-293-28/+105
| | | | | | | | | | | This improves performance when doing concurrent rx/tx on a single ethernet MAC, e.g. when routing between VLANs. Fixes #13072 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42328
* ar71xx: use ETH_ALEN for consistencyJohn Crispin2014-08-251-3/+3
| | | | | | Signed-off-by: Forest Crossman <cyrozap@gmail.com> SVN-Revision: 42280
* ar71xx: TL-WR1043N/ND v2: Fix MAC address of WMACJohn Crispin2014-08-181-3/+1
| | | | | | | | | | | | This sets the MAC address of the WLAN interface to the "official" primary MAC address (the one on the label under the devices, and the one used with the stock firmware). The MAC address used so far (primary-1) isn't even used at all with the stock firmware, which sets (primary) on LAN and WLAN and (primary+1) on the WAN interface (like OpenWrt does with this patch). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 42193
* ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 boardJohn Crispin2014-08-181-0/+1
| | | | | | | | | | The OpenMesh MR600(v1) can only enable the 2.4G WiFi PHY LED through the mini-PCIe device. Not configuring the LED pin inside the platform data makes it impossible to configure it through any standard OpenWrt tool. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 42184
* add support for the NC-LINK SMART-300Imre Kaloz2014-08-111-0/+135
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 42130
* ar71xx: add linux 3.14 supportFelix Fietkau2014-08-071-6/+3
| | | | | | | Signed-off-by: Zhao, Gang <gang.zhao.42@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42038
* ar71xx: update Carambola2 platform dataFelix Fietkau2014-08-041-9/+0
| | | | | | | | | | | | Change list: * Remove button info on GPIO12, there is no button there. * Remove nvram mtd partition, as it's not used for anything, saves 64k for user data. Tested building for carambola2 target. Signed-off-by: Mantas Pucka <mantas@8devices.com> SVN-Revision: 41993
* ar71xx: oolite: the buttons are not active_lowJohn Crispin2014-08-011-3/+3
| | | | | | | | | this caused factory resets when reboot was pressed Signed-off-by: Brent Thomson <brentthomson@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41932
* add support for the archer c5Imre Kaloz2014-07-231-1/+10
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 41814
* ar71xx: Fix GL.iNet WLAN LEDJohn Crispin2014-07-211-1/+1
| | | | | | | | LED script expects WLAN LED to be "gl-connect:red:wlan". Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 41793
* ar71xx: split wndr4300 and wndr3700v4 into 2 seperate mips machinesJohn Crispin2014-07-211-1/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41788
* ar71xx: add kernel support for the OpenMesh OM5P boardJohn Crispin2014-07-201-0/+122
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 41769
* ar71xx: add kernel support for the EnGenius EAP300 v2 boardGabor Juhos2014-07-141-0/+101
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41658
* ar71xx: add kernel support for the Tube2H boardGabor Juhos2014-07-141-0/+113
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41649
* ar71xx: fix ALFA NETWORK's nameGabor Juhos2014-07-141-2/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41643
* ar71xx: add kernel support for the EnGenius ESR900Gabor Juhos2014-07-141-0/+200
| | | | | | | | | | | | | | | Signed-off-by: Forest Crossman <cyrozap@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5714/ [juhosg: - drop nvram.c modifications, - create a separate kernel patch, - use ath79_setup_qca955x_eth_cfg helper, - merge esr900_{010,common}_setup functions, - statically init AR8327 pad configurations, - use pr_err instead of printk] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41640
* ar71xx: use ath79_setup_qca955x_eth_cfg helper for QCA955x based boardsGabor Juhos2014-07-134-72/+4
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41627
* ar71xx: add kernel support for EnGenius ESR1750Gabor Juhos2014-07-131-0/+176
| | | | | | | | | | | Signed-off-by: Jon Suphammer <jon@suphammer.net> Patchwork: http://patchwork.openwrt.org/patch/5840/ [juhosg: - fix coding style in mach-esr1750.c, - rename and refresh kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41624
* ar71xx: add a helper function for setting up ETH_CFG register on QCA955xGabor Juhos2014-07-132-0/+19
| | | | | | | | | Signed-off-by: Jon Suphammer <jon@suphammer.net> Patchwork: http://patchwork.openwrt.org/patch/5839/ [juhosg: fix coding style] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41623
* ar71xx: allow ath79_nvram_parse_mac_addr parsing mac with quotesGabor Juhos2014-07-131-0/+5
| | | | | | | | | | | | Signed-off-by: Jon Suphammer <jon@suphammer.net> Patchwork: http://patchwork.openwrt.org/patch/5838/ [juhosg: - fix coding style, - check the first and the last character of the MAC string instead of using the strchr() function] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41622
* ar71xx: add kernel support for GL-Inet V1 boards/routersGabor Juhos2014-07-131-0/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The GL-Connect GL.iNet v1 router is basically a TP-Link TL-WR703N with more DRAM/Flash, 2x Ethernet ports and console/GPIO header in the same small form-factor: <http://www.gl-inet.com/w/?lang=en> Moreover, the manufacturer is promoting the OpenWrt usage to replace the original firmware and proposing patches against both AA and trunk: <http://www.gl-inet.com/w/?p=398&lang=en> This is a clean up of the original manufacturer GPLv2 patch by alzhao, proposed to the list by Mark Janssen. Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Mark Janssen <mark@sig-io.nl> Signed-off-by: alzhao <alzhao@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5273/ [juhosg: - remove user-space and image generation support, will be included from other patches, - fix coding style and drop superfluous comment in mach-gl-inet.c, - rename and refresh kernel patch, - adjust subject] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41618
* ar71xx: add support for TP-LINK TL-WA860RE v1John Crispin2014-07-131-0/+73
| | | | | | | | | | | | | | | | New router/repeater from TP-LINK - CPU: Atheros AR9341-DL3A (AP123) - Flash: 4MB - Ram: 32MB Similar to TL-WA850RE. Changes: rename file after r41596 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 41598
* ar71xx: added support for TL-WA830RE V2John Crispin2014-07-131-0/+132
| | | | | | | | Corrected patch ath79 insted of auth79. Sorry. Signed-off-by: Fredrik Jonson <fredrik@famjonson.se> SVN-Revision: 41596
* ar71xx: Add support for MikroTik RouterBOARD SXT LiteJohn Crispin2014-07-011-0/+238
| | | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD SXT Lite. The new RB911L series is also supported as a result. v2 of this patch fixes the wmac offset to match what is on the sticker. v3 refreshes the patch against r41148 and defines the power led as the status led in diag.sh v4 refreshes the patch against r41353 and fixes the patch path issue to make git am work correctly v5 selects the kernel config option in the mikrotik profile rather than in the main ar71xx config Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41450
* ar71xx: r41348 is missing these filesJohn Crispin2014-06-262-0/+198
| | | | | | | | sorry, the downside when applying patches with patch Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41350
* ar71xx: WNDAP360 adding wifi LED supportJohn Crispin2014-06-021-3/+4
| | | | | | | | | I added WIFI LED support (so now AP blinks nicely), I removed WPS button GPIO (as it doesn't exist) and changed GPIO for reset button. Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> SVN-Revision: 40976
* ar71xx: add kernel support for HiWiFi HC6361.John Crispin2014-06-021-0/+115
| | | | | | | | | | | | | | | | This board manufactured by HiWiFi has the following features. - Atheros 9331 SoC. - 16MB flash and 64MB RAM. - 4GB eMMC storage via SK6226 USB 2.0 controller. - 2 LAN and 1 WAN ethernet ports with LEDs on them. - 3 blue LEDs on the front panel. - 1 button labeled as "reset". - Powered by a USB cable. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 40973
* ar71xx: add support for dlink dir-615-e1John Crispin2014-06-021-0/+8
| | | | | | | | | | | | Dlink dir-615-e1 can use dir-600-a1's image, but the image can't be uploaded through dlink's normal firmware update web page. Add profile for dir-615-e1 so the generated image can be uploaded through the firmware update web page. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> SVN-Revision: 40969
* ar71xx: add kernel support for the OpenMesh OM2P-HSv2John Crispin2014-06-021-0/+1
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 40961
* ar71xx: add kernel support for the OpenMesh OM2Pv2 boardJohn Crispin2014-06-021-0/+1
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 40955
* ar71xx: fix typo in tl-wr710n mac setup (fixes #16469)Felix Fietkau2014-05-241-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 40840
* kernel: modify mtd related patches for 3.14Hauke Mehrtens2014-05-082-2/+6
| | | | | | | | | | | | The change is the same as ("kernel/generic: modify mtd related patches"). Since these files are under files directory, not a files directory of specific kernel version, better to also change them. So it will avoid adding files to future specific files directory (e.g. files-3.14) for this mtd related change. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> SVN-Revision: 40732
* ar71xx: rb91x: fix ethernet packet loss issuesGabor Juhos2014-04-131-0/+19
| | | | | | | | | | | | | | The RB91x boards are suffering from ethernet packet loss after a cold boot. The cause of the problem is that the AR8035 PHYs requires special register settings to work reliably on these boards. Enable the RGMII TX, RX delays and disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD delay in the ETH_CFG register to fix the issue. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40509
* ar71xx: add kernel support for ZyXEL NBG 6716Gabor Juhos2014-04-131-0/+285
| | | | | | | | | | | | | | | | | | | | | | With this patch OpenWRT supports the following on the ZyXEL NBG 6716: -WiFi 2G (ath9k) -WiFi 5G (ath10k) -NAND flash -2 Ethernet interfaces -USB 2.0 -LEDs including switch -reasonale defaults at first boot Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: - rename and refresh kernel patch, - fix a few typos, - change button key codes, - use zyxel prefix in LED names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40499
* ar71xx: wndr4300: indicate WNDR3700v4 in the kernel support filesGabor Juhos2014-04-121-2/+2
| | | | | | | | | Apart from the wireless chip, the WNDR3700 v4 and the WNDR4300 is the same device. Indicate this in the kernel files. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40479
* ar71xx: wndr4300: enable 5V power for the USB portGabor Juhos2014-04-121-0/+9
| | | | | | | | | | | | | | The 5V power of the USB is controlled by a GPIO pin of the external WiFi chip. Setup the GPIO bitmasks in the platform data of the WiFi chip to ensure that the 5V power gets enabled by the ath9k driver. Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40478
* ar71xx: wndr4300: use KEY_RFKILL code for the Wireless buttonGabor Juhos2014-04-121-1/+1
| | | | | | | | | Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40477
generated by cgit v1.1 at 2024-11-10 22:06:47 +0000