summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/generic
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: Add support for the Meraki MR12 & MR16John Crispin2015-05-231-0/+27
| | | | | | | | | | This patch is to add support for the Meraki MR12 and MR16 Access Points. Currently everything is working, minus the 2nd NIC interface on the MR12 which is built into the SoC. Signed-off-by: Chris R Blake <chrisrblake93 at gmail.com> SVN-Revision: 45726
* ar71xx: add support for compex wpj344Luka Perkov2015-04-201-0/+10
| | | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45527
* ar71xx: adjust OM5P profile for the OpenMesh OM5P-AN boardJohn Crispin2015-03-171-2/+2
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 44866
* ar71xx: add support for compex wpj558Luka Perkov2015-03-061-0/+10
| | | | | | | | | | | | OpenWrt can be flashed with following uboot commands: tftpboot 0x80500000 openwrt-ar71xx-generic-wpj558-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44620
* ar71xx: TL-WA7210n v2 supportJohn Crispin2015-02-241-0/+10
| | | | | | | | | | This patch adds support for TP-Link TL-WA7210n[0] [0] http://www.tplink.com/en/products/details/?model=TL-WA7210N Signed-off-by: Hendrik Frenzel <hfrenzel@scunc.net> SVN-Revision: 44526
* ar71xx: Add profile and build image for TP-Link MR12U v1John Crispin2015-02-131-0/+10
| | | | | | | | | | | | | | | | | This patch adds corrected profile and build image for the TL-MR12U board. Unfortunately i cannot test the factory image since i can't find anywhere the original chinese firmware but the generated openwrt-ar71xx-generic-tl-mr12u-v1-squashfs-sysupgrade.bin worked just fine over a modified mr3040 factory image i managed to modify to initially flash the mr12u from the original firmware. Proper kernel support probably should be added since cat /proc/cpuinfo shows MR13U. Signed-off-by: Daniel Petre <daniel.petre@gmail.com> SVN-Revision: 44427
* ar71xx: Add support for MERCURY MAC1200RJohn Crispin2015-02-091-0/+17
| | | | | | | | | This patch adds support for MERCURY MAC1200R, a dual band 802.11bgn + 802.11ac router based on the AR9344, with QCA988x ath10k radio and 5 Fast Ethernet ports Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 44359
* ar71xx: Revert "added board support for compex wpj558"John Crispin2015-02-021-13/+0
| | | | | | | | This reverts commit f7873071561d82e75ba2dc46433a2982fef8ac6f. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44245
* added board support for compex wpj558John Crispin2015-02-021-0/+13
| | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 44237
* ar71xx: add Netgear WNR1000v2/WNR1000v2-VC support (#18633)John Crispin2015-01-301-0/+11
| | | | | | | | | | | The board is already supported by OpenWrt. WNR1000v2/WNR1000v2-VC are pretty much the same as WNR2000v3/WNR612v2, therefore the same initialization code and flash layout is used. Signed-off-by: Ștefan Rusu <saltwaterc@gmail.com> Tested-by: Douglas Fraser <1dsfraser@gmail.com> SVN-Revision: 44221
* ar71xx: add support for TP-LINK TL-WR843ND v1John Crispin2015-01-231-0/+11
| | | | | | | | | TP-LINK TL-WR843ND v1 is the same model like wr41, but with Power over Ethernet on wan port. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 44085
* Belkin AC 1750 DB (F9K1115v2) supportImre Kaloz2014-12-171-0/+18
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 43734
* add D-link DGL-5500 A1 supportImre Kaloz2014-11-271-0/+12
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 43401
* ar71xx: add support for TP-LINK CPE210/220/510/520John Crispin2014-11-261-0/+11
| | | | | | | | | | This adds support for the TP-LINK CPE210/220/510/520 (Pharos series). These devices are very similar to the Ubiquiti NanoStations, but with better specs: faster CPU, more RAM, 2x2 MIMO. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 43385
* ar71xx: Added support for D-link DHP-1565 rev. A1John Crispin2014-11-191-0/+11
| | | | | | Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> SVN-Revision: 43307
* ar71xx: adjust MR900 profile for the OpenMesh MR900v2 boardJohn Crispin2014-11-141-2/+2
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43270
* ar71xx: create profile and build image for the OpenMesh MR900 boardJohn Crispin2014-11-141-0/+11
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43264
* ar71xx: add support for Netgear WNR2000v4John Crispin2014-11-031-0/+12
| | | | | | Signed-off-by: Michaël Burtin <mburtin@gmail.com> SVN-Revision: 43173
* ar71xx: add support for buffalo WZR-450HP2Felix Fietkau2014-10-221-0/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43026
* ar71xx: add qihoo 360 c301 router supportJohn Crispin2014-09-151-0/+16
| | | | | | | | | | | | | | | Qihoo 360 C301 is a dual band wireless router supports 802.11n and 802.11ac. Its chipset is AR9344 + AR9882 with two 16MB flashes. This patch adds its initial support. v2: * use mtd_get_mac_ascii to fetch MAC address for ath10k. * use ath79_register_pci to initialize AR9882. Signed-off-by: Weijie Gao <hackpascal@gmail.com> SVN-Revision: 42552
* add support for the NC-LINK SMART-300Imre Kaloz2014-08-111-0/+15
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 42130
* add support for the archer c5Imre Kaloz2014-07-231-2/+2
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 41814
* ar71xx: create profile and build image for the OpenMesh OM5P boardJohn Crispin2014-07-201-0/+11
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 41775
* ar71xx: add profile and build image for the EnGenius EAP300 v2 boardGabor Juhos2014-07-141-0/+12
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41661
* ar71xx: add profile and build image for the Tube2H boardGabor Juhos2014-07-141-0/+11
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41652
* ar71xx: add profile and build image for the EnGenius ESR900Gabor Juhos2014-07-141-0/+13
| | | | | | | | | Signed-off-by: Forest Crossman <cyrozap@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5715/ [juhosg: change subject] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41642
* ar71xx: add profile and build image for EnGenius ESR1750Gabor Juhos2014-07-131-0/+16
| | | | | | | | Signed-off-by: Jon Suphammer <jon@suphammer.net> Patchwork: http://patchwork.openwrt.org/patch/5840/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41626
* ar71xx: add profile and build image for GL.iNet v1Gabor Juhos2014-07-131-0/+17
| | | | | | | | | | | | | Patch is based on http://patchwork.openwrt.org/patch/5273/. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Mark Janssen <mark@sig-io.nl> Signed-off-by: alzhao <alzhao@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5653/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41621
* ar71xx: add support for TP-LINK TL-WA860RE v1John Crispin2014-07-131-0/+11
| | | | | | | | | | | | | | | | New router/repeater from TP-LINK - CPU: Atheros AR9341-DL3A (AP123) - Flash: 4MB - Ram: 32MB Similar to TL-WA850RE. Changes: rename file after r41596 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 41598
* ar71xx: r41348 is missing these filesJohn Crispin2014-06-261-0/+29
| | | | | | | | sorry, the downside when applying patches with patch Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41350
* ar71xx: add profile and build image for HiWiFi HC6361.John Crispin2014-06-021-0/+19
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 40975
* ar71xx: add support to TP-LINK TL-WA730RE v1John Crispin2014-06-021-0/+9
| | | | | | | | | | The TL-WA730RE seems to be almost identical to TL-WA701ND, just that it comes without PoE and a stock-firmware claiming the device to be a "Range Extender". Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 40972
* ar71xx: add support for dlink dir-615-e1John Crispin2014-06-021-0/+10
| | | | | | | | | | | | Dlink dir-615-e1 can use dir-600-a1's image, but the image can't be uploaded through dlink's normal firmware update web page. Add profile for dir-615-e1 so the generated image can be uploaded through the firmware update web page. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> SVN-Revision: 40969
* ar71xx: adjust OM2P profile for the OpenMesh OM2P-HSv2 boardJohn Crispin2014-06-021-2/+2
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 40966
* ar71xx: adjust OM2P profile for the OpenMesh OM2Pv2 boardJohn Crispin2014-06-021-2/+2
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 40960
* ar71xx: initial support for TP-Link Archer C7v2Gabor Juhos2014-04-121-1/+1
| | | | | | | | | | | | | | | | | | The C7v2 has 16 MB flash and QCA9880-BR4A rev 2 supported by ath10k driver. The C7v1 had 8 MB flash and the unsupported QCA9880-AR1A rev 1. Signed-off-by: Adam Serbinski <adam@serbinski.com> Patchwork: http://patchwork.openwrt.org/patch/5071/ [juhosg: - remove the v2 specific profile add the ath10k driver to the existing Archer C7 profile instead. Although on v1 devices it does not change the non-working behaviour, but the ath10k driver is useful for users whom have replaced the wifi card with a supported one in their units. - update image/Makefile to build firmware image for both boards if the Archer C7 profile is selected] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40463
* ar71xx: add profile and build firmware image for the Oolite v1 boardGabor Juhos2014-03-271-0/+18
| | | | | | | | Patch-by: Lars Bøgild Thomsen <lth@cow.dk> Patchwork: http://patchwork.openwrt.org/patch/4922/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40036
* ar71xx: add profile and build image for TP-Link TL-WDR4900 v2.0 boardGabor Juhos2014-02-191-0/+11
| | | | | | | | Patch-by: TenNinjas <tenninjas@tenninjas.ca> Patchwork: http://patchwork.openwrt.org/patch/4850/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39637
* generate images for the On Networks N150 (rebranded Netgear WNR612v2)Imre Kaloz2014-01-181-2/+2
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 39320
* ar71xx: enable images for WD My Net N750Gabor Juhos2013-12-171-0/+9
| | | | | | | | | | | | | | Now that the switch works correctly we can enable the images for this board. Flashing from the factory firmware, the factory failsafe loader and sysupgrade was tested successfully. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/4617/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39130
* ar71xx: Update profile for the wa750/wa850 to include rssileds by defaultGabor Juhos2013-11-301-2/+2
| | | | | | | Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38968
* ar71xx: add profile and build image for the Sitecom WLR-8100Gabor Juhos2013-11-291-0/+16
| | | | | | | | | | | | | - partitions on factory fw are a bit strange - unknown contained some strings in factory - unknown2 contains some atheros (2nd art ?) Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Patchwork: http://patchwork.openwrt.org/patch/4149/ [juhosg: edit commit message] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38954
* ar71xx: rssi leds for My Net WiFi Range ExtenderGabor Juhos2013-11-291-0/+1
| | | | | | | | | | | | The device has three extra LEDs which indicate the quality of the wireless link. Thanks to rssileds, this feature now works out of the box. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4462/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38950
* ar71xx: add profile and build image for the TL-WA750RE TL-WA850RE range extenderGabor Juhos2013-11-111-0/+23
| | | | | | | | | Patch to add profile and build image for the tplink TL-WA750RE/WA850RE board Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38719
* ar71xx: build image for the WD My Net Wi-Fi Range ExtenderGabor Juhos2013-11-071-1/+10
| | | | | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4281/ Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> [juhosg: - remove the Image/Build/CyberTANLZMA/loader macro, it is not used - move the MYNETREXT SingleProfile definition to the correct place] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38688
* ar71xx: move WNDR4300 profile to the nand subtargetGabor Juhos2013-11-041-13/+1
| | | | | | | Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38647
* ar71xx: move subtarget specific features to target.mkGabor Juhos2013-10-301-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38600
* ar71xx: add profile and build image for the BXU2000n-2 A1 boardGabor Juhos2013-10-301-0/+17
| | | | | | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4183/ Signed-off-by: Terry Yang <yangbo@bhunetworks.com> [juhosg: - remove MultiProfile, it makes no sense for a single board - move SingleProfile call and the mtdlayout to a different location keep things sorted (well, almost)] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38593
* ar71xx: add profile and build image for the Dragino2 boardGabor Juhos2013-10-301-0/+17
| | | | | | | | | Patchwork: http://patchwork.openwrt.org/patch/4234/ Signed-off-by: Pau Escrich <p4u@dabax.net> [juhosg: remove kernel+rootfs partition and use uimage split instead] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38588
* ar71xx: add profile and build image for the TEW-732BR boardGabor Juhos2013-09-231-0/+11
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38133
generated by cgit v1.1 at 2024-12-28 12:17:35 +0000