summaryrefslogtreecommitdiff
path: root/target/linux/ar71xx/image/legacy.mk
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: create profile and build image for the OpenMesh A60 boardSven Eckelmann2017-02-151-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: fix legacy image build errorFelix Fietkau2017-01-111-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: Added missing support for Linksys E2100LGad Krumholz2016-12-141-0/+1
| | | | | | | | | | | | | It's based on the WRT160NL according to https://wiki.openwrt.org/toh/linksys/e2100l Based on research done here: https://forum.openwrt.org/viewtopic.php?id=24244 and here: https://forum.openwrt.org/viewtopic.php?pid=120791#p120791 this patch was conceived. Signed-off-by: Gad Krumholz <gad.krumholz@gmail.com> [Jo-Philipp Wich: fix ordering, move addpattern change into separate commit] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: Add support for Netgear WNR2000v1Huan Truong2016-12-141-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds supports for the WNR2000v1 board with 4MB flash, and produces device-specific factory, rootfs, and sysupgrade files for the WNR2000v1. This board is errorneously claimed as supported on the OpenWRT wiki as AP81, but AP81 image would not work because of APT81 image requiring having 8MB of flash, while WNR2000v1 has only 4MB. The image requires the u-boot bootloader to be modified to fuhry's bootloader first. Short specification: - CPU: Atheros AR9132 - 4x 10/100 Mbps Ethernet, 1x WAN 10/100 Mbps - 4 MB of Flash - 32 MB of RAM - UART header (J1) on board - 1x button Factory/Initial flash instructions: - Set up a TFTP server on your local machine. - Download the uImage for ar71xx-generic and the rootfs image for ar71xx-generic-wnr2000 and save in the tftp server root. - Gain serial access to the router via the UART port (telnetenable over the network only won't work!). - Upgrade the u-boot bootloader to fuhry's version by running the script: http://fuhry.com/b/wnr2000/install-repart.sh - When the router restarts, interrupt u-boot and gain access to u-boot command line. - Repartititon the board and flash initial uImage and rootfs as follow. Commands to type in u-boot: # tells u-boot that we have a tftp server on 192.168.1.10 setenv serverip 192.168.1.10 # tells u-boot that the router should take the address 192.168.1.1 setenv ipaddr 192.168.1.1 # erase the region from 0x050000-0x3f0000 erase 0xbf050000 +0x3A0000 # loads sqfs.bin on TFTP server, and put it to memory address 0x81000000 tftpboot 0x81000000 sqfs.bin # it will tell you the length of sqfs.bin in hex, let's say ZZZZZZ # copy bit by bit 0xZZZZZZ bytes from offset 0x050000 cp.b 0x81000000 0xbf050000 0xZZZZZZ # same to the uImage.bin, write it right next to sqfs.bin # again, 0xYYYYYY is the length that tftpboot reports tftpboot 0x81000000 uImage.bin cp.b 0x81000000 0xbf2a0000 0xYYYYYY # We need to tell the kernel what board it is booting into, and where to find the partitions setenv bootargs "board=WNR2000 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd" # Tell u-boot where to find the uImage setenv bootcmd "bootm 0xbf2a0000" # Tell u-boot to save parameters to the u-boot-env partitions saveenv # Reset the board reset Tested on: - WNR2000v1 board. - Initial flash works. Known bugs: - I don't know why factory image doesn't work on initial flash on stock firmware in u-boot recovery mode while it should. - Sysupgrade does not yet work, if you do -f it will mess up your installation (requiring a reinstall of sqfs and uImage). Signed-off-by: Huan Truong <htruong@tnhh.net>
* ar71xx: remove AP81 reference design board supportFelix Fietkau2016-12-121-2/+0
| | | | | | This board is very old and unlikely to still be relevant today. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove AP83 reference design board supportFelix Fietkau2016-12-121-2/+0
| | | | | | | | This board is very old and unlikely to still be relevant today. Support for it contains a significant amount of device specific baggage which is worth getting rid of. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove squashfs-64k rootfs image from bin directory, the generic one ↵Felix Fietkau2016-11-291-1/+0
| | | | | | is enough Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove split kernel/rootfs images where the sysupgrade image can be ↵Felix Fietkau2016-11-291-17/+1
| | | | | | written to flash directly Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove 2MB flash variant of WP543Felix Fietkau2016-11-291-1/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove legacy devices that cannot be supported due to kernel ↵Felix Fietkau2016-11-291-9/+0
| | | | | | partition size limits Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove legacy gzip imagesFelix Fietkau2016-11-291-6/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: remove obsolete jffs2 image building codeFelix Fietkau2016-11-291-24/+7
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: build relocate stub for generic and legacy imagesStijn Tintel2016-10-271-6/+0
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* ar71xx: Ignore firmware building errors of UBNT and CyberTAN devicesChuanhong Guo2016-10-261-7/+7
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ar71xx: Move MR12 & MR16 from legacy to genericChris Blake2016-10-261-4/+0
| | | | | | | | | | | This moves the Meraki MR12 and Meraki MR16 to the new generic target. Tested and verified working on both devices. Note that kernel/rootfs images are still generated. This is because they are used for the inital flashing process due to the fun pace at which UBoot erases/writes to SPI. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ar71xx: move dragino2 from legacy to genericKarl Palsson2016-10-131-2/+0
| | | | | | Tested on real hardware with r1804. Signed-off-by: Karl Palsson <karlp@etactica.com>
* ar71xx: add relocation loaderMatthias Schiffer2016-10-111-0/+6
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: mark U-Boot and radio calibration data partitions as read-onlyPiotr Dymacz2016-09-191-11/+11
| | | | | | | General convention is to keep U-Boot and radio calibration data (ART) mtd partitions marked as read-only. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for Zbtlink ZBT-WE1526Piotr Dymacz2016-08-181-0/+1
| | | | | | | | | | | | | | | | | | | | | Zbtlink ZBT-WE1526 is based on Qualcomm Atheros QCA9531 v2. Short specification: - 650/400/200 MHz (CPU/DDR/AHB) - 5x 10/100 Mbps Ethernet - 1x USB 2.0 - 128 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz, up to 22 dBm - two external, non-detachable antennas - 8x LED, 1x button - UART header (pinout: VCC, RX, TX, GND) Flash instruction: Use sysupgrade in vendor firmare which is based on OpenWrt. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: clean up legacy-devices.mkMatthias Schiffer2016-07-271-6/+0
| | | | | | | | | Several legacy images were not buildable because of missing profile definitions in legacy-devices.mk since MultiProfile was removed. Update legacy-devices.mk to provide all necessary profiles, and change ordering to match legacy.mk. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: remove obsolete MultiProfile template codeFelix Fietkau2016-07-211-40/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix build error when initramfs is disabledFelix Fietkau2016-07-131-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix a legacy image porting issueFelix Fietkau2016-07-131-6/+1
| | | | | | | Get rid of remaining IMAGE_PROFILE references and move template calls the right place Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix nand device profileJohn Crispin2016-07-051-1/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: seama: fix making factory imagesYousong Zhou2016-06-301-40/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | rootfs part needs to be aligned to erase block size which is passed as the 6th argument to Image/Build/Seama and is now 65536 since commit commit 5119ee9 "ar71xx: fix bogus hardcoded kernel image size for Seama images (fixes #20585)", but $(($(6) - 64)) still assumes that the argument is a limit on kernel partition size, i.e. 1310720, so the generated factory image is wrong in that the kernel will fail to find the rootfs (FlySpray link at [1]) This patch will workaround it with the following steps 1. Calculate the required space for seama header and META data in step 5 2. Pre-padding 64 bytes to lzma-compressed loader 3. Generate correctly padded image-$(2).tmp 4. Strip out the padding 5. Seal it with seama utility While at it convert seama to new build method [1] FS#35 - mynet-n750 factory images don't find root partition, https://bugs.lede-project.org/index.php?do=details&task_id=35 Reported-by: Steven Haigh <netwiz@crc.id.au> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: further legacy image build fixesJo-Philipp Wich2016-06-271-1/+6
| | | | | | | - Add missing macro to trigger the generation of 64k padded squashfs images - Revert Zcomax image generation to use the prepared 64k squashfs image Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: merge profiles into image building codeJo-Philipp Wich2016-06-271-31/+26
| | | | | | | | | | | - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "ar71xx: fix legacy image building"John Crispin2016-06-231-15/+20
| | | | | | | | | | | | | | This reverts commit 59e98b27c93d282edb62fad756fd1c1e587c067f. and Revert "ar71xx: merge profiles into image building code" This reverts commit 636089ead6864364798ac988299429d171051c0e. these are still causing issues Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: fix legacy image buildingJo-Philipp Wich2016-06-241-20/+14
| | | | | | | | | | | | | | | | | | After the conversion from legacy device profiles to the newer profile information embedded in the image building code, the legacy recipes got triggered twice with different eval depths, leading to shell syntax errors when processing certain images. The double processing was caused by the remaining Image/Build macro in legacy.mk which serves as main entry point for the new style image build code in conjunction with the newly introduced LegacyDevice/* macros which caused the legacy image build fallback code to kick in. In order to fix the issue, rework all legacy macros to work under the legacy image build wrapper and remove the Image/Build macro of legacy.mk to prevent legacy profiles getting executed in the context of the new build code. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: merge profiles into image building codeJohn Crispin2016-06-221-0/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: hiwifi-hc6361: lift size limit on kernel and rootfs partsYousong Zhou2016-06-221-19/+0
| | | | | | | | | | | | | | | | | | | | | | The patch has been run-tested and the relevant dmsg logs are as the following [ 0.762447] Creating 5 MTD partitions on "spi0.0": [ 0.767217] 0x000000000000-0x000000010000 : "u-boot" [ 0.775139] 0x000000010000-0x000000020000 : "bdinfo" [ 0.781014] 0x000000020000-0x000000fe0000 : "firmware" [ 0.810558] 2 uimage-fw partitions found on MTD device firmware [ 0.815043] 0x000000020000-0x000000170000 : "kernel" [ 0.821925] 0x000000170000-0x000000fe0000 : "rootfs" [ 0.827587] mtd: device 4 (rootfs) set to be root filesystem [ 0.831937] 1 squashfs-split partitions found on MTD device rootfs [ 0.837983] 0x0000005c0000-0x000000fe0000 : "rootfs_data" [ 0.845621] 0x000000fe0000-0x000000ff0000 : "backup" [ 0.851445] 0x000000ff0000-0x000001000000 : "art" While at it, convert to new build method Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: convert OM2P to device profileFelix Fietkau2016-06-071-0/+15
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add WRTnode2Q supportKeLei Liang2016-06-061-0/+2
| | | | Signed-off-by: KeLei Liang <xzmu@wrtnode.com>
* ar71xx/image/edimax shorten the revision to 13 characterAlexander Couzens2016-06-011-2/+2
| | | | | | | edimax fails if the revision is longer than 13 characters. Also change the name from OpenWrt to LEDE Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ar71xx: Generate sysupgrade images for OpenMesh devicesSven Eckelmann2016-05-231-0/+3
| | | | | | | | | | | | Some OpenWrt based firmwares like Gluon expect that a sysupgrade image exists when a device firmware can be updated via sysupgrade. This image wasn't created until now because OpenMesh devices use the same image for factory and sysupgrade flash. Copying the image from *factory.bin to *sysupgrade.bin is therefore enough to make the sysupgrade functionality visible. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: Add support for initramfs images for OpenMesh devicesSven Eckelmann2016-05-231-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ar71xx: split legacy image building code into a separate fileFelix Fietkau2016-05-231-0/+1210
Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.1 at 2024-07-27 19:07:45 +0000