summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx/base-files
Commit message (Collapse)AuthorAgeFilesLines
* target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGCJohn Crispin2014-06-021-1/+1
| | | | | | | | | | | | | | | | | | | ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct var $# (=number of args) here. under normal conditions this had no impact, but we should at least correct it. the error was observable like this: root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh root@box:~ . /lib/upgrade/platform.sh root@box:~ . /lib/upgrade/common.sh root@box:~ platform_check_image /tmp/myfirmware.bin ash: bad number root@box:~ echo $? 0 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 40915
* brcm63xx: add initial support for BCM963268BU_P300 reference boardJonas Gorski2014-02-221-0/+6
| | | | | | | | | Only netboot tested, so no images or now. GbE ports are only working in FE mode, and leds do not work. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39679
* brcm63xx: add VW6339GU supportJonas Gorski2014-02-221-0/+7
| | | | | | | | | Completely untested except for booting from network; wan port only works in 10/HD, lan1 only in 100/FD. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39678
* brcm63xx: F@ST2504n board support (image, base-files)Jonas Gorski2014-02-222-0/+6
| | | | | | | | Signed-off-by: Max Staudt <openwrt.max@enpas.org> Patchwork: http://patchwork.openwrt.org/patch/4730/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39676
* brcm63xx: add support for Asmax AR 1004g routerJonas Gorski2014-02-222-0/+5
| | | | | | | | | | Support for Asmax AR 1004g router Signed-off-by: Adrian Feliks <mexit@o2.pl> Patchwork: http://patchwork.openwrt.org/patch/4464/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39674
* brcm63xx: Add userspace support for Sagemcom F@ST2704V2 ADSL routerJonas Gorski2014-02-223-1/+26
| | | | | | | | | | This adds userspace support for Sagemcom F@st 2704 router. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4215/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39672
* bcm63xx: update ralink wlan firmware hotplug script for new eeprom sizeFelix Fietkau2013-07-151-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37337
* bcm63xx: fix DSL-274xB F1 default network configJonas Gorski2013-06-241-0/+1
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37032
* base-files: input/button drivers get loaded before preinit by procdJohn Crispin2013-06-211-15/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37000
* base-files: diag does not need to insmod any drivers, procd already did it ↵John Crispin2013-06-211-1/+0
| | | | | | | | for us Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36999
* brcm63xx: add user-space support for Netgear CVG834GFlorian Fainelli2013-06-062-0/+5
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36877
* bcm63xx: remove defconfig supportJonas Gorski2013-05-121-18/+0
| | | | | | All boards use uci-defaults, no need to keep defconfig support. SVN-Revision: 36610
* brcm63xx: fix LED names for various boardsFlorian Fainelli2013-03-041-8/+8
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35880
* bcm63xx: Fix sysupgrade for tag-version 7 and 8Jonas Gorski2013-02-211-1/+1
| | | | | | | | Fix sysupgrade for tag-version 7 and 8. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35724
* brcm63xx: migrate platform to common led helper functionsFlorian Fainelli2013-02-181-49/+2
| | | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35661
* remove superfluous calls to /lib/brcm63xx.shFlorian Fainelli2013-02-053-6/+1
| | | | | | | | | | The first preinit script 03_do_brcm63xx.sh does the right job of exporting variables for the other subsequent preinit scripts to use them. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35504
* remove references to the old switch driverFlorian Fainelli2013-02-051-15/+0
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 35503
* fix trx checksum after first boot and add led/button definitions for boards ↵Mirko Vogt2013-02-052-0/+12
| | | | | | RTA770BW and RTA770W SVN-Revision: 35501
* add support for board named RTA770WMirko Vogt2013-02-051-1/+2
| | | | | | | | | | Actually this board is the very same as the rta770bw, where the additional 'b' within the name just indicates 'Annex B'. The ADSL Modem itself is able to handle both, Annex A as well as Annex B - the loaded firmware makes the only difference SVN-Revision: 35500
* bcm63xx: switch to b53 and swconfigJonas Gorski2013-01-234-39/+65
| | | | | | | | | | | | | | | | | Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
* all targets: use numerically prefixed uci-defaults file names to better ↵Jo-Philipp Wich2013-01-182-0/+0
| | | | | | control order of execution SVN-Revision: 35217
* bcm63xx: Add Huawei HG556a supportJonas Gorski2013-01-043-1/+10
| | | | | | | | | | Add Huawei EchoLife HG556a support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo@openwrt.org: added some code style fixes] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35011
* Do not use deprecated path to functions.sh (/etc/functions.sh -> ↵Mirko Vogt2012-12-191-1/+1
| | | | | | /lib/functions.sh) SVN-Revision: 34793
* bcm63xx: Add a fixup for rt2x00 devices.Jonas Gorski2012-11-241-0/+39
| | | | | | | | | This patch adds support for defining rt2x00 eeprom data. This eeprom data can be extracted from flash or loaded directly from a firmware file. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 34322
* bcm63xx: fix SPW303V imagesJonas Gorski2012-11-051-0/+1
| | | | | | | SPW303V also needs its CRC fixed up since increasing the image size to 4MB to prevent the dual image mode of CFE. SVN-Revision: 34091
* add support for Comtrend AR5381u.Jonas Gorski2012-10-233-0/+7
| | | | | | | | | | Router: Comtrend AR5381u. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33895
* add support for Comtrend AR5387un.Jonas Gorski2012-10-233-0/+7
| | | | | | | | | | Router: Comtrend AR5387un. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33894
* add support for HomeStation ADB P.DG A4001N.Jonas Gorski2012-10-233-0/+7
| | | | | | | | | | Router: HomeStation ADB P.DG A4001N. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> SVN-Revision: 33893
* Add F@ST2604 board support.Jonas Gorski2012-10-211-0/+1
| | | | | | | | Add Sagem F@ST2604 board support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 33886
* bcm63xx: fix entering failsafe through buttonJonas Gorski2012-10-081-0/+1
| | | | | | | gpio_keys_polled needs to be loaded in preinit for buttons to work for entering failsafe. SVN-Revision: 33653
* bcm63xx: Add nb6 support (BCM6362 SoC base boards)Jonas Gorski2012-07-312-0/+5
| | | | | | | | | Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com> Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> [jonas.gorski@gmail.com: add network config for nb6, make switch fix a platform patch] SVN-Revision: 32924
* Add CT6376-1 board supportFlorian Fainelli2012-07-272-0/+2
| | | | | | | | Added CT6373 devices instead of using NB4's devices, as Florian suggested. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 32892
* add 96348w3 board (#10764)Florian Fainelli2012-06-061-1/+2
| | | | SVN-Revision: 32088
* bcm63xx: build images for 6328 reference boards with various flash sizesJonas Gorski2012-05-303-0/+12
| | | | | | | | | | | Build images for 96328avng and 963281TAN (untested) for three different flash sizes: 4MB, 8MB, and 16MB. Known issues: * Button setup unknown, thus no fail-safe available. * All other BCM6328 and BCM63XX issues SVN-Revision: 32004
* bcm63xx: readd accidentially dropped network config for SPW303VJonas Gorski2012-05-301-0/+1
| | | | SVN-Revision: 32003
* bcm63xx: add support for DSL-274XB rev F1Jonas Gorski2012-05-273-1/+4
| | | | SVN-Revision: 31882
* bcm63xx: add a default switch configuration for DSL-274XBJonas Gorski2012-05-271-1/+6
| | | | SVN-Revision: 31874
* bcm63xx: setup network config through uci-defaultsJonas Gorski2012-05-2711-159/+42
| | | | SVN-Revision: 31873
* bcm63xx: move the board name workaround to /lib/brcm63xx.shJonas Gorski2012-05-272-8/+8
| | | | SVN-Revision: 31872
* bcm63xx: use the exact board id as board identification stringJonas Gorski2012-05-272-14/+17
| | | | | | No need to keep the bcm63xx/ at the start or the chipid info at the end. SVN-Revision: 31871
* Merge branch 'bcm63xx'Florian Fainelli2012-03-052-1/+16
| | | | SVN-Revision: 30819
* add support for BT Voyager 2110 (#8810)Florian Fainelli2011-05-203-1/+20
| | | | | | Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> SVN-Revision: 26959
* add support for DSL-2640B rev B2Florian Fainelli2011-05-202-0/+19
| | | | | | Signed-off-by: Adrian Feliks <mexit@o2.pl> SVN-Revision: 26958
* add support for D-Link DVA-G3810BN/TLFlorian Fainelli2011-05-202-0/+33
| | | | | | | | This patch adds support for D-Link's DVA-G3810BN/TL product. Signed-off-by: Roman Dumycz <roman@secureas.com> SVN-Revision: 26956
* add support for BT Voyager 2500 (#9070)Florian Fainelli2011-05-201-1/+1
| | | | SVN-Revision: 26954
* bcm63xx: Add support for the T-Home Speedport W 303VFlorian Fainelli2011-05-112-0/+19
| | | | | | | | | Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26878
* bcm63xx: Update support for the DSL-274xB revision CFlorian Fainelli2011-05-112-1/+6
| | | | | | | | | | | | | Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used for the rev C3 (same hardware) and add a fixup for C2. Also generate images for C3. While we are at it, rename the LEDs to conform to the Linux LED naming conventions. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26876
* bcm63xx: Accept any led with power in its name as power ledFlorian Fainelli2011-05-111-1/+1
| | | | | | Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 26875
* add support for 'MAGIC' bcm6348-based boardFlorian Fainelli2011-02-191-1/+1
| | | | | | | | | | | | | | | I wrote a patch to add 96348SV board (aka MAGIC) support to trunk. In my case I've found it in a Telsey "Alice W-Gate" router, fairly common (in the past) in Italy. I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2 relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c ) Thanks to KanjiMonster for the support on the IRC channel. Signed-off-by: Laurento Frittella <laurento.frittella@gmail.com> SVN-Revision: 25584
* fix T-Com Speedport W 500V default configFlorian Fainelli2011-02-091-0/+0
| | | | | | | | The device is called SPW500V, not SP500W. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 25431
generated by cgit v1.1 at 2024-11-15 22:45:37 +0000