summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx/files/arch/mips
Commit message (Expand)AuthorAgeFilesLines
* tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in im...Daniel Dickinson2010-04-141-2/+2
* flashmap and image generation: reduced union bcm_tag to a single struct combi...Florian Fainelli2010-04-011-164/+55
* move bcm_tag.h out of the flashmap patch so that user-land tools can re-use itFlorian Fainelli2010-03-281-0/+178
* move files to files-2.6.30, to ease newer kernel integrationFlorian Fainelli2010-01-3130-5137/+0
* brcm63xx: Fix gpio-buttons and add LED and buttons for Tecom IGW6200 and Comt...Daniel Dickinson2010-01-281-14/+58
* Fix typo in AGPF_S0 reset button definitionDaniel Dickinson2010-01-161-1/+1
* bcm63xx: add gpio leds to alice gateClaudio Mignanti2010-01-151-0/+49
* add support for the RTA1025W_16 board (#5979)Florian Fainelli2009-11-221-0/+17
* brcm63xx: fix cardbus support with BCM6358 (closes: #5918)Nicolas Thill2009-10-051-1/+1
* prevent gpio-buttons registration failureFlorian Fainelli2009-09-081-3/+5
* fix typos against the gpio buttons driver (#5804)Florian Fainelli2009-09-071-2/+3
* add infrastructure to register gpio-input reset buttonFlorian Fainelli2009-09-061-0/+16
* fix reboot hang on bcm6345, thanks AndyIFlorian Fainelli2009-09-021-1/+3
* add missing patch which fakes a cardbus controller on top of PCI, thanks SGDAFlorian Fainelli2009-08-122-0/+332
* more bcm63xx definition fixes, thanks AndyIFlorian Fainelli2009-08-113-1/+3
* add support for the Pirelli AG226G board (#5337)Florian Fainelli2009-08-091-0/+22
* bcm6345 fixes from AndyIFlorian Fainelli2009-08-062-3/+7
* fix off-by-one maximum timeout in the wathchdog default counter for bcm6345, ...Florian Fainelli2009-08-061-3/+1
* disable watchdog for bcm6345 until it gets fixedFlorian Fainelli2009-08-061-1/+4
* more bcm6345 fixes and definitions, thanks to AndyIFlorian Fainelli2009-07-313-0/+20
* add experimental support for 2.6.28.10, tested on bcm6338Florian Fainelli2009-07-301-0/+1
* fix typo for the flash start address on bcm6345Florian Fainelli2009-07-271-1/+1
* register GPIO-connected LEDs for known boardsFlorian Fainelli2009-07-181-1/+240
* fix comment only valid for bcm6345Florian Fainelli2009-07-171-1/+1
* add the infrastructure to use a MPI/GPIO connected VoIP DSPFlorian Fainelli2009-07-013-1/+79
* fixes for the bcm6338 clocks, thanks MaximeFlorian Fainelli2009-07-011-2/+6
* a couple of more fixes to get 6345 booting up to the console handoverFlorian Fainelli2009-06-303-2/+16
* shared DMA zone is twice smaller on 6338Florian Fainelli2009-06-281-1/+4
* bcm6338 can support PCI since it has MPIFlorian Fainelli2009-06-271-0/+1
* more fixes for bcm6338, no need not to prevent reads from MPI registers now t...Florian Fainelli2009-06-271-6/+10
* fix the flash address comment and register the flash device again with its pr...Florian Fainelli2009-06-271-3/+7
* fix a stupid typo preventing the board from being detectedFlorian Fainelli2009-06-271-1/+1
* prevent bcm6338 and bcm6345 from crashing very earlyFlorian Fainelli2009-06-271-3/+9
* only register fallback sprom and enable PCI if we actually have support for PCIFlorian Fainelli2009-06-271-2/+4
* more missing register definitions for bcm6338Florian Fainelli2009-06-271-2/+12
* more bcm6338 and bcm6345 related fixesFlorian Fainelli2009-06-261-0/+1
* define bcm6338 SDRAM base register and make sure that the right CPU id will b...Florian Fainelli2009-06-261-1/+2
* add board definitions for the bcm6338wFlorian Fainelli2009-06-261-0/+8
* be SMP safe even with gpiolibFlorian Fainelli2009-06-041-7/+8
* cache gpio values in gpio_setFlorian Fainelli2009-06-041-5/+8
* use the correct number of GPIOs for bcm6358Florian Fainelli2009-06-041-2/+2
* register gpiochip earlier, allowing gpio-based runtime detection to be perfor...Florian Fainelli2009-06-042-2/+5
* register gpiodevFlorian Fainelli2009-04-301-0/+7
* enable all blocks on 6338 and uart clock on 6345Florian Fainelli2009-03-211-1/+5
* add support for bcm6345 SoC, needs testingFlorian Fainelli2009-03-202-2/+34
* fix SPI register switch and prepare for UDC, thanks to Henk Vergonet (#4783)Florian Fainelli2009-03-176-15/+101
* add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366Florian Fainelli2009-03-121-0/+23
* do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_...Florian Fainelli2009-03-111-8/+4
* fix typo for the bcm6338 spi IRQ, change platform driver name and make the SP...Florian Fainelli2009-03-082-1/+4
* compile and register SPI controller deviceFlorian Fainelli2009-03-082-0/+3