summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx/image
Commit message (Collapse)AuthorAgeFilesLines
* brcm63xx: Add support for Plusnet 2704NJonas Gorski2015-08-051-0/+2
| | | | | | | | BCM6318: add support for Plusnet / Sagem 2704N (V1) Signed-off-by: Matt Goring <matt.goring@googlemail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46562
* brcm63xx: build image for DSL-275XB D1Jonas Gorski2015-08-051-1/+1
| | | | | | | | It boots fine, so no reason to not build it. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46561
* brcm63xx: switch to new image building systemJonas Gorski2015-07-251-260/+497
| | | | | | | | | | | | Switches BCM63xx to the new IB system. Images are generated per device definitions. There are no changes in the produced images except for some name changes, caused by the new IB system. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46490
* brcm63xx: use new tool for generating redboot imagesJonas Gorski2015-07-252-30/+5
| | | | | | | | | Simplify image/Makefile by using the new perl script for RedBoot. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46489
* brcm63xx: make use of the new BuildDTB commandJonas Gorski2015-07-161-1/+1
| | | | | | | | | Now that we have a BuildDTB command, make use of it instead of calling dtc directly. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46390
* build: Prevent more gzip timestampsJohn Crispin2015-07-141-1/+1
| | | | | | | | | To improve reproducibility, prevent the inclusion of timestamps in the gzip header. Signed-off-by: Reiner Herrmann <reiner@reiner-h.de> SVN-Revision: 46361
* brcm63xx: fix A4001N image padding sizeJonas Gorski2015-06-111-1/+1
| | | | | | | | | | | | When r42245 moved A4001N to DT based detection the image padding size was accidentally increased from 4 to 8 MiB. This made images unflashable on these devices. Fixes #19836. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45945
* brcm63xx: fix livebox image generationJonas Gorski2015-06-021-0/+2
| | | | | | | | | Livebox does need the uncompressed kernel, so just create it during image generation. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45875
* brcm63xx: delete uncompressed kernels after useJonas Gorski2015-06-011-0/+2
| | | | | | | | | Delete the dtb appended, uncompressed kernels after having compressed them, so they don't end in the image builder. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45869
* brcm63xx: use common image prefixJo-Philipp Wich2015-05-271-23/+24
| | | | | | | | | Also remove "redbootscript" and "redbootscript.padded" junk files. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> Acked-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45780
* brcm63xx: Add Huawei HG655b supportJonas Gorski2015-05-211-0/+2
| | | | | | | | | | | | | | | This patch adds support for the Huawei HG655b. Nothing much special in this router, it's just another BCM6368 with a Ralink RT3062 wifi chip and the calibration data embedded in the main flash chip at offset 0x7c0000. There is also configuration data used by the OEM firmware before the cal_data partition, this area is protected by the board_data partition in this patch. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45708
* brcm63xx: add missing bcm96329bhr profile and dtsJonas Gorski2015-04-211-0/+2
| | | | | | | | Hopefully the last missing board. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45557
* brcm63xx: fix zyxel kernel nameJonas Gorski2015-03-311-1/+1
| | | | | | | | | Accidentally left over development artifact. Reported-by: John Crispin <blogic@openwrt.org> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45179
* brcm63xx: don't build non-dtb kernels anymoreJonas Gorski2015-03-301-3/+0
| | | | | | | | | Now that all supported boards have an dts there is no need for a dtb free kernel anymore. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45169
* brcm63xx: move DSL-275XB to DTJonas Gorski2015-03-301-0/+2
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45168
* brcm63xx: move bcm6318 reference boards to DTJonas Gorski2015-03-301-0/+4
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45167
* brcm63xx: move VG50 to DTJonas Gorski2015-03-301-0/+2
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45166
* brcm63xx: move V2110 to DTJonas Gorski2015-03-301-0/+2
| | | | | | | | Also readd image generation which was accidentally dropped in r43364. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45165
* brcm63xx: use relocate to move the kernel back to start of ramJonas Gorski2015-03-301-10/+33
| | | | | | | | | | | | Appearently the kernel only uses kernel above it, so moving it to an higher address causes a lot of unavailable memory (#19327). Also move the on-flash kernel to 0x80a0000, as newer CFEs don't like uncompressing there (net-booting an ELF kernel is fine, though). Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45164
* brcm63xx: move RTA770(B)W to dtsJonas Gorski2015-03-251-0/+4
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44992
* brcm63xx: move MAGIC to dtsJonas Gorski2015-03-251-0/+2
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44991
* brcm63xx: move CPVA502+ to dtsJonas Gorski2015-03-251-0/+2
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44990
* brcm63xx: move dg834g v4 to dtsJonas Gorski2015-03-251-0/+2
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44989
* brcm63xx: move dsl-2640u to dtsJonas Gorski2015-03-251-0/+2
| | | | | | | | Also build image again(?). Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44988
* brcm63xx: move bcm963268bu_p300 to dtsJonas Gorski2015-03-251-0/+2
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44987
* brcm63xx: Add BT Home Hub 2A support.Jonas Gorski2015-03-251-0/+2
| | | | | | | | | | | | | | | | | | Support for the BT HomeHub 2.0 Type A. This router was manufactured by Thomson, and it's BCM6358 based. The leds are controled by two chained HC594, all working ok. The BCM5325 switch has the RESET# pin wired to the GPIO15, but currently there is no way to tell the b53 driver how to get this gpio number in brcm63xx, therefore swconfig won't use it when performing a switch reset. The patch was tested with several firmwares, and all except unsupported stuff (i.e xDSL) works pretty well. Tested-by: Tahir <tahir00ali@gmail.com> Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> SVN-Revision: 44985
* brcm63xx: move kernel load address to 8MiBJonas Gorski2015-03-251-1/+1
| | | | | | | | Fixes boot when uncompressed kernel is > 4 MiB (#19251). Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44984
* brcm63xx: hcsimage: respect load addressJonas Gorski2015-03-251-1/+2
| | | | | | | | Respect the vmlinux load address when generating images. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44983
* brcm63xx: add Livebox 1 firmware image generationJonas Gorski2015-03-252-3/+40
| | | | | | | | | | | | | | | | | | | | | | Currently there isn't images ready for flashing liveboxes boards. This patch adds a script and the code to call it in the bcm63xx images builder makefile to generate the livebox 1 firmware. I removed some lines to avoid generating unneded files in the bin/ dir for this board. And added code to generate a squashed rootfs aligned to 64 kB since the current one in the /bin dir is 128 kB aligned and doesn't work. Still no sysupgrade support for this board. Upgrading from within openwrt can be done writing with mtd the kernel, and then the 64k aligned rootfs. Regards Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> [jogo: use sed instead of a separate shell script for the boot script, make it respect the load address] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44982
* brcm63xx: add a dummy image recipe for boards missing proper imagesJonas Gorski2015-03-251-1/+6
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44981
* brcm63xx: drop non-dtb image recipeJonas Gorski2015-03-251-11/+0
| | | | | | | | All images generated contain dtbs, so it is now unused. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44980
* brcm63xx: Add DGND3700 v1 / DGND3800B supportJonas Gorski2015-03-161-0/+12
| | | | | | | | | | | | | | | | | This adds support for the Netgear DGND3700 v1 and DGND3800B. DGND3700 v1 and DGND3800B are exactly the same router, only one difference, the factory firmware. This patch produces two factory firmwares for each router. The router includes an onboard NAND flash for extra storage. NAND is currently not supported in bcm63xx, so no code added for this part. The NOR flash (32MB) is enough for storing an openwrt firmware. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> [jogo: Add back commit message from v1] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44831
* brcm63xx: fix image generation and broken patchJonas Gorski2015-02-271-1/+3
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44569
* brcm63xx: convert BTV2500V to dtsJonas Gorski2015-02-271-3/+2
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44564
* brcm63xx: convert RTA1320 to dtsJonas Gorski2015-02-271-2/+2
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44563
* brcm63xx: convert RTA1025 to dtsJonas Gorski2015-02-271-2/+2
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44562
* brcm63xx: use dtb for cvg834gJonas Gorski2015-02-271-14/+19
| | | | | | | | | | | | | Add a dtsi for bcm3368, add a dts and profile for cvg834g, and convert it to use ImageDTB. Since HCS requires more arguments, enhance the max arguments of the call. The image name is intentionally left blank to prevent non-initramfs images to be built, as they currently contain no rootfs and consequently won't work. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44561
* brcm63xx: image: move image argument to front in *DTB callsJonas Gorski2015-02-271-101/+101
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44560
* brcm63xx: add dts and profile for LiveboxJonas Gorski2015-02-271-9/+7
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44559
* brcm63xx: allow lzma to use 32MB RAMJonas Gorski2015-02-271-4/+5
| | | | | | | | | | | | | Most 16 MiB RAM devices don't even load elf kernels, so it's safe to assume we have at least 32 MB RAM. This fixes tftp booting with the default package set as this already produces an uncompressed kernel > 8 MiB. New limit is 8 MiB compressed / 24 MiB compressed. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44558
* brcm63xx: do not align squashfs rootfs startJonas Gorski2015-02-271-6/+9
| | | | | | | | | | | | | We do not need to align the start of read only rootfs's to erase blocks. This allows us to write the squashfs rootfs directly behind the kernel, potentially freeing up one erase block. We still need to align for jffs2, so add a flag for imagetag to optionally align the rootfs start. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44556
* brcm63xx: drop call to prepare_generic_squashfsJonas Gorski2015-02-271-3/+0
| | | | | | | | We do not use the result, so no need to call it. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44555
* brcm63xx: alphabetically order image generationJonas Gorski2014-12-081-5/+5
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43577
* brcm63xx: add DT support for USR9108Jonas Gorski2014-12-081-3/+2
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43575
* brcm63xx: add DT support for F5D7633Jonas Gorski2014-12-081-2/+2
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43574
* brcm63xx: add DT support for DG834GT/PNJonas Gorski2014-12-081-2/+2
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43573
* brcm63xx: add DT support for TD-W8900GBJonas Gorski2014-12-081-3/+2
| | | | | | | | | | | | According to the vendor tarball, the TD-w8900GB's flash has 64k erase block size, but CFE spans two blocks. So fixup the image offset accordingly but keep block size at its default (64k). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: add commit message, add image offset, change nvram offset] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 43572
* brcm63xx: add DT support for DSL-2640BJonas Gorski2014-12-081-2/+2
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43571
* brcm63xx: add DT support for CPVA642Jonas Gorski2014-12-081-3/+2
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43570
* brcm63xx: add DT support for DSL-2650UJonas Gorski2014-12-011-2/+2
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43452
generated by cgit v1.1 at 2024-11-02 14:01:47 +0000