summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx/patches-3.18
Commit message (Collapse)AuthorAgeFilesLines
* brcm63xx: drop 3.18 supportJonas Gorski2015-12-02165-16482/+0
| | | | | | | | Drop 3.18 support; it will live on in CC. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47696
* brcm63xx: fix brcm, bcm6345-ext-intc interrupt controllerJonas Gorski2015-11-041-3/+4
| | | | | | | | | brcm,field-width is read but unused Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 47379
* kernel: update 3.18 to 3.18.21Jonas Gorski2015-09-021-13/+13
| | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46768
* brcm63xx: add Comtrend VR-3026e supportJonas Gorski2015-08-301-0/+79
| | | | | | | | | | Add support for Comtrend VR-3026e v1. The device is almost identical to the Comtrend VR-3025un. Signed-off-by: Martin Tesar <tesarmar@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46752
* brcm63xx: ensure dummy byte is set for mapped spi flash with fast readJonas Gorski2015-08-239-39/+60
| | | | | | | | | | | | | Some CFEs seem to misconfigure the mapped memory flash access with fast read but without a dummy byte, causing all accesses to be prefixed with 0xff. This of course breaks reading out the nvram, so do not just move back to single i/o accessors, but also ensure that the dummy byte is correctly set. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46707
* kernel: update 3.18 to 3.18.20Hauke Mehrtens2015-08-091-3/+3
| | | | | | | | | Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 46570
* brcm63xx: Add support for Plusnet 2704NJonas Gorski2015-08-051-0/+65
| | | | | | | | BCM6318: add support for Plusnet / Sagem 2704N (V1) Signed-off-by: Matt Goring <matt.goring@googlemail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46562
* brcm63xx: unbreak board_probe_switch againJonas Gorski2015-06-3038-122/+143
| | | | | | | | | | | Also move it to an earlier place so new boards added are less likely to confuse quilt. Fixes #19965. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46148
* kernel: update 3.18 to 3.18.16Jonas Gorski2015-06-171-9/+9
| | | | | | | | | | | Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16 Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46011
* kernel: update 3.18 to 3.18.14Jonas Gorski2015-05-213-16/+16
| | | | | | | | | | | | | | Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14 Build tested on brcm63xx and ipq806x, runtested on brcm63xx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45711
* brcm63xx: Add Huawei HG655b supportJonas Gorski2015-05-211-0/+72
| | | | | | | | | | | | | | | This patch adds support for the Huawei HG655b. Nothing much special in this router, it's just another BCM6368 with a Ralink RT3062 wifi chip and the calibration data embedded in the main flash chip at offset 0x7c0000. There is also configuration data used by the OEM firmware before the cal_data partition, this area is protected by the board_data partition in this patch. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45708
* brcm63xx: add missing bcm96329bhr profile and dtsJonas Gorski2015-04-2113-52/+37
| | | | | | | | Hopefully the last missing board. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45557
* brcm63xx: fix bcm63268 rgmii port rgmii configurationJonas Gorski2015-04-191-0/+13
| | | | | | | | | | | This should rather be done by passing appropriate platform_data/OF, but should suffice for now. Fixes e.g. GbE ports on BCM963268BU_P300. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45505
* brcm63xx: allow using all four rgmii ports on bcm6316xJonas Gorski2015-04-192-9/+5
| | | | | | | | | At least the third rgmii port is available on 63169, so assume all are available. Simplifies cpu vs. variant handling. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45504
* brcm63xx: BCM963268BU_P300 reference board fixesJonas Gorski2015-04-183-3/+3
| | | | | | | | | | | - Fix profile name. - Rremove whitespace on board patch. - Refresh patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45499
* brcm63xx: move DSL-275XB to DTJonas Gorski2015-03-303-74/+16
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45168
* brcm63xx: move bcm6318 reference boards to DTJonas Gorski2015-03-3015-122/+60
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45167
* brcm63xx: move VG50 to DTJonas Gorski2015-03-3011-77/+30
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45166
* brcm63xx: move V2110 to DTJonas Gorski2015-03-3021-22/+30
| | | | | | | | Also readd image generation which was accidentally dropped in r43364. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45165
* brcm63xx: use relocate to move the kernel back to start of ramJonas Gorski2015-03-301-29/+0
| | | | | | | | | | | | Appearently the kernel only uses kernel above it, so moving it to an higher address causes a lot of unavailable memory (#19327). Also move the on-flash kernel to 0x80a0000, as newer CFEs don't like uncompressing there (net-booting an ELF kernel is fine, though). Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45164
* brcm63xx: use a lookup for bcmcia's ready gpioJonas Gorski2015-03-252-0/+118
| | | | | | | | | Should fix pcmcia on BCM6348 and BCM6358 after switching to DT-probed gpio controllers. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44995
* brcm63xx: move RTA770(B)W to dtsJonas Gorski2015-03-2522-131/+81
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44992
* brcm63xx: move MAGIC to dtsJonas Gorski2015-03-2544-141/+111
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44991
* brcm63xx: move CPVA502+ to dtsJonas Gorski2015-03-2516-15/+23
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44990
* brcm63xx: move dg834g v4 to dtsJonas Gorski2015-03-2515-15/+23
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44989
* brcm63xx: move dsl-2640u to dtsJonas Gorski2015-03-2550-157/+145
| | | | | | | | Also build image again(?). Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44988
* brcm63xx: move bcm963268bu_p300 to dtsJonas Gorski2015-03-2514-98/+35
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44987
* brcm63xx: Add BT Home Hub 2A support.Jonas Gorski2015-03-251-0/+51
| | | | | | | | | | | | | | | | | | Support for the BT HomeHub 2.0 Type A. This router was manufactured by Thomson, and it's BCM6358 based. The leds are controled by two chained HC594, all working ok. The BCM5325 switch has the RESET# pin wired to the GPIO15, but currently there is no way to tell the b53 driver how to get this gpio number in brcm63xx, therefore swconfig won't use it when performing a switch reset. The patch was tested with several firmwares, and all except unsupported stuff (i.e xDSL) works pretty well. Tested-by: Tahir <tahir00ali@gmail.com> Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> SVN-Revision: 44985
* brcm63xx: move kernel load address to 8MiBJonas Gorski2015-03-251-0/+34
| | | | | | | | Fixes boot when uncompressed kernel is > 4 MiB (#19251). Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44984
* brcm63xx: use consistent gpio chip labeling for OF/non-OFJonas Gorski2015-03-163-23/+18
| | | | | | | | | Ensure gpio chips are always labeled the same; this allows simplifying any arch setup gpio lookups. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44846
* brcm63xx: Add DGND3700 v1 / DGND3800B supportJonas Gorski2015-03-161-0/+67
| | | | | | | | | | | | | | | | | This adds support for the Netgear DGND3700 v1 and DGND3800B. DGND3700 v1 and DGND3800B are exactly the same router, only one difference, the factory firmware. This patch produces two factory firmwares for each router. The router includes an onboard NAND flash for extra storage. NAND is currently not supported in bcm63xx, so no code added for this part. The NOR flash (32MB) is enough for storing an openwrt firmware. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> [jogo: Add back commit message from v1] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44831
* brcm63xx: brcm63xxpart: fix buffer overrun in of parserJonas Gorski2015-03-151-7/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We never account for the added partitions from the tag parser, so allocated two partioness less than needed. This can cause issues when the memory gets reused before the mtd code can actually add the partitions. Fixes oopses like: [ 0.920000] mtd: device 2 (rootfs) set to be root filesystem [ 0.924000] 1 squashfs-split partitions found on MTD device rootfs [ 0.932000] 0x0000002e0000-0x0000003f0000 : "rootfs_data" [ 0.940000] 0x000000010000-0x0000003f0000 : "linux" [ 0.948000] CPU 0 Unable to handle kernel paging request at virtual address 00010203, epc == 8028ddf8, ra == 801ad5d4 [ 0.956000] Oops[#1]: [ 0.956000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.8 #22 [ 0.956000] task: 8181da78 ti: 8181e000 task.ti: 8181e000 [ 0.956000] $ 0 : 00000000 10008f00 00010203 81049e40 [ 0.956000] $ 4 : 00010203 000000d0 00000000 000000fd [ 0.956000] $ 8 : 00000000 80015490 00000000 80370000 [ 0.956000] $12 : 00000000 00000001 00000000 2f736269 [ 0.956000] $16 : 00010203 000000d0 8007bde0 81482000 [ 0.956000] $20 : 00000000 00000004 81481f80 803c4b78 [ 0.956000] $24 : 00000000 00000000 [ 0.956000] $28 : 8181e000 8181fbe8 80b20000 801ad5d4 [ 0.956000] Hi : 00000000 [ 0.956000] Lo : 00000000 [ 0.956000] epc : 8028ddf8 strlen+0x4/0x20 [ 0.956000] Not tainted [ 0.956000] ra : 801ad5d4 kstrdup+0x30/0x84 [ 0.956000] Status: 10008f03 KERNEL EXL IE [ 0.956000] Cause : 00800008 [ 0.956000] BadVA : 00010203 [ 0.956000] PrId : 0002a010 (Broadcom BMIPS4350) [ 0.956000] Modules linked in: [ 0.956000] Process swapper/0 (pid: 1, threadinfo=8181e000, task=8181da78, tls=00000000) [ 0.956000] Stack : 8148aa00 803c4bcc 00000000 801cd9d0 00000000 8148a400 818a1400 003f0000 81482000 8007bde0 8148aa00 800ac78c 8148aa00 00000004 8037ae30 8181fc4c 8148aa00 803bc074 803c0000 80074b84 00000000 00010000 00000004 ffffffff 8037ae30 00000004 8148aa00 00000004 803c4b80 818a1400 803c0000 00000005 81481f80 80074ce0 8181fc84 00000005 81879800 8008ece4 00000000 003f0000 ... [ 0.956000] Call Trace: [ 0.956000] [<8028ddf8>] strlen+0x4/0x20 [ 0.956000] [<801ad5d4>] kstrdup+0x30/0x84 [ 0.956000] [<8007bde0>] allocate_partition+0x58/0x93c [ 0.956000] [<80074ce0>] add_mtd_partitions+0x90/0x144 [ 0.956000] [<801cc228>] mtd_device_parse_register+0x78/0xcc [ 0.956000] [<801e7870>] of_flash_probe+0x658/0x728 [ 0.956000] [<80216ee0>] platform_drv_probe+0x24/0x60 [ 0.956000] [<801221f4>] driver_probe_device+0xcc/0x214 [ 0.956000] [<800466f8>] __driver_attach+0x7c/0xb4 [ 0.956000] [<800c38bc>] bus_for_each_dev+0x94/0xa4 [ 0.956000] [<800c35e4>] bus_add_driver+0x104/0x1ec [ 0.956000] [<80122400>] driver_register+0xac/0x100 [ 0.956000] [<80113a5c>] do_one_initcall+0x148/0x204 [ 0.956000] [<803cbd1c>] kernel_init_freeable+0x168/0x220 [ 0.956000] [<800157bc>] kernel_init+0x10/0x114 [ 0.956000] [<800108a8>] ret_from_kernel_thread+0x14/0x1c [ 0.956000] [ 0.956000] Code: 03e00008 27bd0028 00801021 <80430000> 10600003 00000000 080a377e 24420001 03e00008 [ 1.192000] ---[ end trace 9d89ccbcae27fe40 ]--- [ 1.200000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.200000] [ 1.200000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44787
* brcm63xx: fix ethernet breakage in 3.18Jonas Gorski2015-02-281-0/+27
| | | | | | | | | | | | Linux commit d75b1ade567ffab ("net: less interrupt masking in NAPI") chose the samantics of the napi poll return value, which caused napi to not resume interrups/polling anymore. Fix the return value to restore expected behaviour. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44576
* brcm63xx: fix BCM63268 interrupt register locations for legacy probeJonas Gorski2015-02-281-2/+2
| | | | | | | | | Legacy probe passed the IRQSTAT registers instead of the IRQMASK registers causing all register accesses to be offset by 16 bytes. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44575
* brcm63xx: fix gpio register usageJonas Gorski2015-02-282-6/+6
| | | | | | | | | | The driver expected data then dir, but both dts and legacy code passed dir then data. Fix this by making the driver expect the registers in ascending order, i.e. dir then data. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44574
* brcm63xx: backport and enable DT spi-gpio no CS supportJonas Gorski2015-02-271-0/+91
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44570
* brcm63xx: fix image generation and broken patchJonas Gorski2015-02-271-1/+1
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44569
* brcm63xx: remove gpio base workaroundJonas Gorski2015-02-271-34/+0
| | | | | | | | | Now that all gpio users without named gpios use DT, we do not need to fix the gpio controller bases anymore. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44567
* brcm63xx: move buttons and leds to dts filesJonas Gorski2015-02-2767-2859/+543
| | | | | | | | | | | | | | Register buttons and leds through DT for all available dts, and remove them from the board files. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: remove leds/buttons from board files fix wrong led polarities for dsl-274xb-c2, cpva642, p870hw comment out spi-gpio and associated leds] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44566
* brcm63xx: probe gpio controllers through DTJonas Gorski2015-02-2719-40/+676
| | | | | | | | | | | | | | | | Add a generic mmio gpio controller based driver and probe it through device tree. Use aliases for base calculation until we converted all users to device tree or named gpios. Convert bcm63xx_enet's ephy-reset gpio to use a named gpio. While at it, remove the duplicate reset gpio defintion for livebox. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44565
* brcm63xx: convert BTV2500V to dtsJonas Gorski2015-02-2716-18/+26
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44564
* brcm63xx: convert RTA1320 to dtsJonas Gorski2015-02-2719-18/+26
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44563
* brcm63xx: add dts and profile for LiveboxJonas Gorski2015-02-271-26/+41
| | | | | | Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44559
* package: mtd: move bcm963xx_tag definition into source codeJonas Gorski2015-02-276-11/+11
| | | | | | | | | | Remove the need for the header file to be exported - we don't need most of it anyway; all we care about are the offset of the rootfs length and header crc fields. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44557
* brcm63xx: fix a few issues in irq chip driversJonas Gorski2014-12-088-216/+259
| | | | | | | | Fix locking and lock usage, making it compile for SMP. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 43578
* brcm63xx: refresh patchesJonas Gorski2014-12-0824-35/+35
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43576
* brcm63xx: add DT support for USR9108Jonas Gorski2014-12-081-1/+2
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43575
* brcm63xx: add DT support for F5D7633Jonas Gorski2014-12-082-2/+3
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43574
* brcm63xx: add DT support for DG834GT/PNJonas Gorski2014-12-081-1/+2
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 43573
* brcm63xx: add DT support for TD-W8900GBJonas Gorski2014-12-083-3/+4
| | | | | | | | | | | | According to the vendor tarball, the TD-w8900GB's flash has 64k erase block size, but CFE spans two blocks. So fixup the image offset accordingly but keep block size at its default (64k). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: add commit message, add image offset, change nvram offset] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 43572
generated by cgit v1.1 at 2024-12-18 12:46:40 +0000