summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx
Commit message (Expand)AuthorAgeFilesLines
* enable all blocks on 6338 and uart clock on 6345Florian Fainelli2009-03-212-1/+10
* add support for bcm6345 SoC, needs testingFlorian Fainelli2009-03-204-2/+83
* fix SPI register switch and prepare for UDC, thanks to Henk Vergonet (#4783)Florian Fainelli2009-03-179-19/+134
* add the CFE offset command line option to the imagetag utility, closes (#4366)Florian Fainelli2009-03-161-2/+2
* add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366Florian Fainelli2009-03-122-0/+34
* do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_...Florian Fainelli2009-03-113-17/+17
* make SPI work in full-duplex mode by defaultFlorian Fainelli2009-03-101-2/+2
* include kmod-switch in the default imagesFlorian Fainelli2009-03-091-1/+1
* package the bcm63xx-spi driverFlorian Fainelli2009-03-081-6/+0
* add bcm63xx_spi based on reading shared/opensource/flash/spiflash.c from the ...Florian Fainelli2009-03-083-6/+471
* fix SPI accessorsFlorian Fainelli2009-03-081-10/+14
* fix typo for the bcm6338 spi IRQ, change platform driver name and make the SP...Florian Fainelli2009-03-083-2/+5
* compile and register SPI controller deviceFlorian Fainelli2009-03-082-0/+3
* make bcm6358 consistend with the other boards namingFlorian Fainelli2009-03-081-1/+1
* fix some SPI register definitions and platform-device registration codeFlorian Fainelli2009-03-084-20/+26
* prepare for SPI controller driverFlorian Fainelli2009-03-065-0/+252
* fix SPI register definitionsFlorian Fainelli2009-03-061-6/+14
* fix a bcm963xx-flash warningFlorian Fainelli2009-03-021-1/+1
* provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__Florian Fainelli2009-02-273-52/+43
* move the device registration to an earlier initcall level, required for fallb...Florian Fainelli2009-02-271-1/+1
* disable all kernel config options that are set to =mFelix Fietkau2009-02-221-19/+19
* update to 2.6.28.7 and 2.6.27.19Hauke Mehrtens2009-02-211-1/+1
* update to 2.6.27.17Gabor Juhos2009-02-151-1/+1
* always select kmod-ssb, pci is supportedFlorian Fainelli2009-02-131-3/+3
* do not overried 802.1q and PHY kernel configuration symbolsFlorian Fainelli2009-02-101-3/+0
* update to 2.6.27.15Gabor Juhos2009-02-081-1/+1
* resync kernel configurationFlorian Fainelli2009-02-031-2/+0
* add support for user9102 boards (#4537)Florian Fainelli2009-01-312-0/+24
* generate images for old CFE based boards like the Davolink DV201Florian Fainelli2009-01-291-0/+10
* Add board definitions for the Davolink DV201AMRFlorian Fainelli2009-01-291-0/+25
* update to 2.6.27.13Gabor Juhos2009-01-251-1/+1
* switch to 2.6.27.12Gabor Juhos2009-01-231-1/+1
* frequency is in Hz, thanks JoelFlorian Fainelli2009-01-171-1/+1
* fix SPI register definitionsFlorian Fainelli2009-01-151-18/+56
* allow bcm6338 to get the base address of the memory controller register, requ...Florian Fainelli2009-01-151-0/+1
* update to 2.6.27.11Gabor Juhos2009-01-151-1/+1
* correct SPI register sizeFlorian Fainelli2009-01-061-1/+1
* Add hostapd-mini to default images where applicableAndy Boyett2009-01-021-2/+4
* update to 2.6.27.10Gabor Juhos2008-12-192-7/+7
* add board registration of the bcm96338gwFlorian Fainelli2008-12-191-0/+22
* 6338 has no PCIFlorian Fainelli2008-12-191-1/+0
* add experimental support for bcm6338Florian Fainelli2008-12-195-2/+136
* Register watchdog driverFlorian Fainelli2008-12-192-0/+4
* fix register definitions for bcm6358, thanks SGDAFlorian Fainelli2008-12-191-5/+5
* resync kernel configurationFlorian Fainelli2008-12-191-0/+1
* Add bcm63xx_wdt but do not enable it yetFlorian Fainelli2008-12-175-0/+386
* update to 2.6.27.9 and refresh patchesGabor Juhos2008-12-161-1/+1
* Build images for Inventel LiveboxFlorian Fainelli2008-12-121-1/+11
* Resync kernel configFlorian Fainelli2008-12-111-16/+1
* Fix typo, we are not building for the DG834G (ar7) but the DG834GT (brcm6348)Florian Fainelli2008-12-101-1/+1