summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx
Commit message (Expand)AuthorAgeFilesLines
* update to latest 2.6.27.26 stable kernelFlorian Fainelli2009-07-032-2/+2
* add the infrastructure to use a MPI/GPIO connected VoIP DSPFlorian Fainelli2009-07-015-1/+97
* fixes for the bcm6338 clocks, thanks MaximeFlorian Fainelli2009-07-011-2/+6
* a couple of more fixes to get 6345 booting up to the console handoverFlorian Fainelli2009-06-303-2/+16
* shared DMA zone is twice smaller on 6338Florian Fainelli2009-06-281-1/+4
* turn on size optimization for bcm63xxFlorian Fainelli2009-06-281-0/+1
* off-by-one gpio numbers for bcm6338Florian Fainelli2009-06-281-1/+1
* bcm6338 can support PCI since it has MPIFlorian Fainelli2009-06-271-0/+1
* more fixes for bcm6338, no need not to prevent reads from MPI registers now t...Florian Fainelli2009-06-273-11/+20
* fix the flash address comment and register the flash device again with its pr...Florian Fainelli2009-06-271-3/+7
* fix a stupid typo preventing the board from being detectedFlorian Fainelli2009-06-271-1/+1
* prevent bcm6338 and bcm6345 from crashing very earlyFlorian Fainelli2009-06-271-3/+9
* only register fallback sprom and enable PCI if we actually have support for PCIFlorian Fainelli2009-06-271-2/+4
* do not bloat the kernel with experimental bcm6345 for nowFlorian Fainelli2009-06-271-1/+1
* more missing register definitions for bcm6338Florian Fainelli2009-06-272-9/+52
* more bcm6338 and bcm6345 related fixesFlorian Fainelli2009-06-264-1/+9
* define bcm6338 SDRAM base register and make sure that the right CPU id will b...Florian Fainelli2009-06-262-2/+7
* generate images for the bcm6338wFlorian Fainelli2009-06-261-0/+4
* add board definitions for the bcm6338wFlorian Fainelli2009-06-261-0/+8
* add imagetag support for BT Voyager 2500V, patch from Daniel Dickinson (#5364)Florian Fainelli2009-06-182-2/+2
* generate experimental images for bcm6338 boards, thanks to Daniel DickinsonFlorian Fainelli2009-06-171-0/+7
* use 2.6.27.5Florian Fainelli2009-06-171-1/+1
* use the same i/o schedulers for all targetsImre Kaloz2009-06-151-3/+0
* use build system REVISION variable (#5317)Florian Fainelli2009-06-101-5/+3
* The attached patch adds building of firmware images for more routers based on...Florian Fainelli2009-06-104-58/+120
* cleanup the watchdog driver a bitFlorian Fainelli2009-06-091-10/+10
* fix the watchdog driver and enable it by defaultFlorian Fainelli2009-06-092-114/+131
* rework imagetag firmware generator and MTD partition parser to accomodate wit...Florian Fainelli2009-06-094-50/+436
* remove this line which got accidentaly succesfully applied, but should not ha...Florian Fainelli2009-06-081-2/+0
* fix ethernet driver removalFlorian Fainelli2009-06-041-1/+2
* fix pcmcia device removalFlorian Fainelli2009-06-041-0/+1
* add missing null entry in pcmcia driverFlorian Fainelli2009-06-041-0/+2
* request gpio pins and set direction correctly for pcmciaFlorian Fainelli2009-06-041-1/+14
* be SMP safe even with gpiolibFlorian Fainelli2009-06-041-7/+8
* cache gpio values in gpio_setFlorian Fainelli2009-06-041-5/+8
* use the correct number of GPIOs for bcm6358Florian Fainelli2009-06-043-6/+12
* register gpiochip earlier, allowing gpio-based runtime detection to be perfor...Florian Fainelli2009-06-043-2/+9
* merger mtu/802.1q related fixes: bcm63xx integrated ethernet mac supports rec...Florian Fainelli2009-06-032-11/+76
* backport an upstream fix: We're not disabling IRQ, so we must call the irq sa...Florian Fainelli2009-06-011-1/+1
* include wpa-supplicant iw in the default profileFlorian Fainelli2009-05-291-1/+2
* also include the SPI driver in the gw6x00 profileFlorian Fainelli2009-05-261-1/+1
* include kmod-usb-storage and kmod-ipt-nathelper-extra for SIP connection trac...Florian Fainelli2009-05-261-2/+3
* add the Tecom GW6x00 (6000 and 6200) board profileFlorian Fainelli2009-05-251-0/+20
* update to new stable 2.6.27.24Florian Fainelli2009-05-201-1/+1
* disable CONFIG_SSB_BLOCKIO by default until we fix it properly in mac80211Florian Fainelli2009-05-191-1/+0
* even more config file cleanupImre Kaloz2009-05-181-4/+0
* add missing SSB_BLOCKIO to prevent build failres, will resolve that globally ...Florian Fainelli2009-05-181-0/+1
* add support for sysupgrade (#5117)Florian Fainelli2009-05-172-1/+24
* config cleanupsImre Kaloz2009-05-151-1/+0
* cardbus != pcmcia -- disable it in b43Imre Kaloz2009-05-151-1/+0