summaryrefslogtreecommitdiff
path: root/target/linux/generic/files/drivers
Commit message (Collapse)AuthorAgeFilesLines
* generic: rtl8366rb: add support for initvals from DTSKevin Darbyshire-Bryant2017-04-251-0/+25
| | | | | | | | | Allow per-device initvals in the DTS file for rlt8366rb switches. Shamelessly copies 30494598f891fc4436a49eca55fc31d03c087841 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* ar8327: Add workarounds for AR8337 switch.Vittorio Gambaletta2017-03-302-1/+62
| | | | | | | | | | | | | | | | RGMII RX delay setting needs to be always specified for AR8337 to avoid port 5 RX hang on high traffic / flood conditions. Also, the HOL registers that set per-port and per-packet-priority buffer sizes are updated with the reduced values suggested by the QCA switch team. Finally, AR8327 reserved register fixups are disabled for the AR8337. This patch is adapted from the Code Aurora QSDK, but with magic values mapped to proper defines. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
* kernel: mtdsplit: Add support for Mikrotik NOR firmwareThibaut VARENE2017-02-223-0/+123
| | | | | | | | | | | | | | | | The RouterBOOT bootloader does not care where the kernel lives in the SPI flash, all that matters is that the kernel is wrapped in the custom yaffs container as generated by kernel2minor. This container has a fixed signature as follows: 00000000 00 00 00 01 00 00 00 01 ff ff 6b 65 72 6e 65 6c |..........kernel| This patch adds mtdsplit support for identifying that signature and triggering the search for the rootfs. rootfs is expected at EB boundary since we use wget mtd_find_rootfs_from(). We make no use of the yaffs file size field because it contains invalid data in the image generated by kernel2minor. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* Revert "kernel: ar8327/ar8337: disable ARL access code to avoid lockups ↵Stijn Tintel2017-02-221-6/+0
| | | | | | | | | | | (FS#384)" This reverts commit ec1a695daa7390a6c24e3b28d3956f194cba2cb5. Revert the workaround, the problem was properly fixed in 237454991618e0e8b7ceb8a8a2a43fca12c1a454. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ar8216: flush ARL table during reset after init_globalsGünther Kelleter2017-02-161-0/+1
| | | | | | | | | | commit 33b72b8e0faf7a39faabece584fd6da61cd8f8df "ar8216: adjust ATU flushing in case of link changes" introduced portwise flushing on link down events. Now the ARL table could be in a chaotic state after boot where ar8xxx_sw_get_arl_table looped forever (depending on the entries collected while booting). Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
* kernel: fix build error in mtdsplit driverKoen Vandeputte2017-02-071-1/+1
| | | | | | | Add missing parentheses. Fixes kernel build issue when using this driver. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: port b53 to use kernel 4.5+ APIRafał Miłecki2017-02-062-17/+8
| | | | | | For backward 4.4 compatibility I added patch reverting my changes. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: update phy drivers for 4.9Felix Fietkau2017-02-037-134/+90
| | | | | | add backport patches for older kernels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update mtdsplit for linux 4.9Felix Fietkau2017-02-0310-15/+16
| | | | | | add backport patches for older kernels Signed-off-by: Felix Fietkau <nbd@nbd.name>
* generic: rtl8366rb: fix compatible stringMathias Kresin2017-02-031-1/+1
| | | | | | | Use a vendor prefix as it has to be for all not core driver. Update the compatible string in the device tree files accordingly. Signed-off-by: Mathias Kresin <dev@kresin.me>
* rtl8366_smi: add linux 4.4 compatibilityFelix Fietkau2017-02-011-4/+9
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ledtrig-netdev: don't cancel work on events for different interfacesSergey Sergeev2017-01-291-3/+3
| | | | | | | | | This fixes logic bug(in function netdev_trig_notify) introduced in 0b2991a8ed32b5d9ba0a7c3441a72e1c1a1c4fde commit. Events triggered by different interfaces were stopping work queue so it wasn't working for tx/rx mode. Signed-off-by: Sergey Sergeev <adron@yapic.net>
* generic: rtl836x: add support for Green FeatureTobias Wolf2017-01-271-62/+198
| | | | | | | | The GPL licensed source code of Belkin contains an ASIC based "Green Feature". This change adds support for this Green Feature that can be activated with an DTS option or swconfig. Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
* generic: rtl8366s: add support support for initvals from DTSTobias Wolf2017-01-271-2/+27
| | | | | | | This change provides the possibility to define per-device initvals in the DTS file for a rlt8366s switch. Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
* kernel: ar8327/ar8337: disable ARL access code to avoid lockups (FS#384)Jo-Philipp Wich2017-01-161-0/+6
| | | | | | | | | | Running ar8327_get_arl_entry() early after boot leads to MDIO related system lockups on several devices using this driver. Since dumping the ARL table contens is an optional, uncritical feature, simply disable the code for now. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: make ledtrig-netdev use a work queue for updatesFelix Fietkau2017-01-161-16/+16
| | | | | | | | This fixes hangs in igb that happen if the update call interrupts an already existing dev_get_stats call. In that case the calling CPU deadlocks because it's trying to acquire the same spinlock recursively. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mvsw61xx: add support for MV88E6352Imre Kaloz2017-01-132-0/+7
| | | | | | MV88E6352 is used on Linksys WRT3200ACM Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
* generic: ar8216: fix invalid bounds check imported from ChromeOS (FS#347)Jo-Philipp Wich2016-12-231-1/+1
| | | | | | | | The priv->vlan_id member is of size AR8X16_MAX_VLANS, not AR8X16_MAX_PORTS, so check for the proper maximum value in order to avoid capping valid VLAN IDs to 7 (AR8X16_MAX_PORTS - 1). Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: Add support for Netgear WNR2000v1Huan Truong2016-12-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds supports for the WNR2000v1 board with 4MB flash, and produces device-specific factory, rootfs, and sysupgrade files for the WNR2000v1. This board is errorneously claimed as supported on the OpenWRT wiki as AP81, but AP81 image would not work because of APT81 image requiring having 8MB of flash, while WNR2000v1 has only 4MB. The image requires the u-boot bootloader to be modified to fuhry's bootloader first. Short specification: - CPU: Atheros AR9132 - 4x 10/100 Mbps Ethernet, 1x WAN 10/100 Mbps - 4 MB of Flash - 32 MB of RAM - UART header (J1) on board - 1x button Factory/Initial flash instructions: - Set up a TFTP server on your local machine. - Download the uImage for ar71xx-generic and the rootfs image for ar71xx-generic-wnr2000 and save in the tftp server root. - Gain serial access to the router via the UART port (telnetenable over the network only won't work!). - Upgrade the u-boot bootloader to fuhry's version by running the script: http://fuhry.com/b/wnr2000/install-repart.sh - When the router restarts, interrupt u-boot and gain access to u-boot command line. - Repartititon the board and flash initial uImage and rootfs as follow. Commands to type in u-boot: # tells u-boot that we have a tftp server on 192.168.1.10 setenv serverip 192.168.1.10 # tells u-boot that the router should take the address 192.168.1.1 setenv ipaddr 192.168.1.1 # erase the region from 0x050000-0x3f0000 erase 0xbf050000 +0x3A0000 # loads sqfs.bin on TFTP server, and put it to memory address 0x81000000 tftpboot 0x81000000 sqfs.bin # it will tell you the length of sqfs.bin in hex, let's say ZZZZZZ # copy bit by bit 0xZZZZZZ bytes from offset 0x050000 cp.b 0x81000000 0xbf050000 0xZZZZZZ # same to the uImage.bin, write it right next to sqfs.bin # again, 0xYYYYYY is the length that tftpboot reports tftpboot 0x81000000 uImage.bin cp.b 0x81000000 0xbf2a0000 0xYYYYYY # We need to tell the kernel what board it is booting into, and where to find the partitions setenv bootargs "board=WNR2000 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd" # Tell u-boot where to find the uImage setenv bootcmd "bootm 0xbf2a0000" # Tell u-boot to save parameters to the u-boot-env partitions saveenv # Reset the board reset Tested on: - WNR2000v1 board. - Initial flash works. Known bugs: - I don't know why factory image doesn't work on initial flash on stock firmware in u-boot recovery mode while it should. - Sysupgrade does not yet work, if you do -f it will mess up your installation (requiring a reinstall of sqfs and uImage). Signed-off-by: Huan Truong <htruong@tnhh.net>
* net: ar8327: modify some configuration of switchPavel Kubelun2016-12-012-4/+13
| | | | | | | | | | | | | | | | Imported from https://source.codeaurora.org/quic/qsdk/system/openwrt/commit/?h=korg/linux-3.4.y/release/arugula_bb_cs&id=2be4f8a8b205ae1a37db44839864451ebe893e6e Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> Enable flow control of LAN and WAN ports to get better performance. Setup pvid as 0 for all ports during initialisation to avoid confusion during system or switch INIT. Disable PORT MAC before config MAC to avoid it work abnormal. This change is for IR-054144, IR-057315. Change-Id: I345f3dffa59ad3f97150e09692723da12a7b1067 Signed-off-by: Zou Shunxiang <shunxian@codeaurora.org> Signed-off-by: xiaofeis <xiaofeis@codeaurora.org>
* net: ar8216: address security vulnerabilities in swconfig & ar8216Pavel Kubelun2016-12-012-7/+26
| | | | | | | | | | | | | | | | | | | | | | | Imported from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/e1aaf7ec008a97311867f0a7d0418e4693fecfd4%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: net: ar8216: address security vulnerabilities in swconfig & ar8216 This patch does the following changes: *address the security vulnerabilities in both swconfig framework and in ar8216 driver (many bound check additions, and turned swconfig structure signed element into unsigned when applicable) *address a couple of whitespaces and indendation issues BUG=chrome-os-partner:33096 TEST=none Change-Id: I94ea78fcce8c1932cc584d1508c6e3b5dfb93ce9 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/236490 Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Commit-Queue: Toshi Kikuchi <toshik@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8216: prevent device duplication in ar8xxx_dev_listPavel Kubelun2016-12-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/fd7b89dd464a4afffa04ff2e17c771dfe95668cf%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: prevent device duplication in ar8xxx_dev_list If probe is called twice, once for PHY0 and a second time for PHY4, the same switch device will be added twice to ar8xxx_dev_list, while supposedly this list should have one element per hardware switch present in the system. While no negative impact have been observed, it does happen if a platform instanciates these two PHYs from device-tree, as an example. Change-Id: Iddcbdf7d4adacb0af01975b73f8e56b4582e894e Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/234790 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8216: hold ar8xxx_dev_list_lock during use_count--Pavel Kubelun2016-12-011-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/c3fd96a7b87da23979d8569ce45447f8419ca303%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: hold ar8xxx_dev_list_lock during use_count-- It is possible for the remove() callback to run twice in parallel, which could result into --use_count returning only 1 in both cases and the rest of the unregistration path to never be reached. This case has never been observed in practice, but we will fix preventively to make the code more robust. BUG=chrome-os-partner:33096 TEST=none Change-Id: If09abe27fdb2037f514f8674418bafaab3cbdef6 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/232870 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8327: replace sprintf() by scnprintf()Pavel Kubelun2016-12-011-2/+1
| | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/fd0c41c7b9327ce003f44df38ce42556fb177b17%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: replace sprintf() by scnprintf() BUG=chrome-os-partner:33096 TEST=none Change-Id: Ib82035c9f2769a86d3e90f9573a09e5700ff5676 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/232829 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8327: remove unnecessary spinlocksPavel Kubelun2016-12-011-4/+0
| | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/541c15f8dd02ddce07e0a462a0c2572d8398bccc%5E%21/#F0 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: remove unnecessary spinlocks BUG=chrome-os-partner:33096 TEST=none Change-Id: Ia1b51258504501863fd3298717cc923a1baf34ca Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/232828 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* net: ar8216: sync mib_work cancellationPavel Kubelun2016-12-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | Import from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/c05af20272059e149e2da2e1fa1fbd90c03ec979 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> CHROMIUM: drivers: ar8216: sync mib_work cancellation ar8xxx_mib_stop() is called from ar8xxx_phy_remove(), so we want to make sure the work doesn't run after priv is freed / the device ceases to exist. BUG=chrome-os-partner:33096 TEST=none Change-Id: Iafb44ce93a87433adc4576e5fea5fda58d1f43a9 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-on: https://chromium-review.googlesource.com/232827 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Reviewed-by: Grant Grundler <grundler@chromium.org> Tested-by: Toshi Kikuchi <toshik@chromium.org>
* kernel: rtl8367(b): fix build errorMathias Kresin2016-11-192-2/+2
| | | | | | | | | | Fix build on targets not using CONFIG_MODULE_STRIPPED. Neither RTL8367_DRIVER_DESC nor RTL8367B_DRIVER_DESC are defined anywhere. It worked for targets using CONFIG_MODULE_STRIPPED since our module stripper no-ops the various module info macros. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: mtdsplit: add support for WRGG imagesStijn Tintel2016-10-273-0/+115
| | | | | | | | Support splitting WRGG images, found in some D-Link devices (e.g. DAP-2695). Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* kernel: drop usbdev LED triggerRafał Miłecki2016-10-191-371/+0
| | | | | | It was LEDE's trigger that was replaced by upstream usbport one. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: ar8216: improve ar8xxx_is_possible checkChristian Lamparter2016-10-151-6/+6
| | | | | | | | | | | | | | | | | The commit "generic: ar8216: add sanity check to ar8216_probe" (774da6c7a40320a320b28d71291c0e61fcf7bc8a) stated that PHY IDs should be checked at address 0-4. However, the PHY 4 was never check by the loop. This patch extends the check to be similar to the Atheors SDK. It tries all 4 ports and skips unconnected PHYs if necessary. If it cannot find any familiar PHYs, it will prevent the phy driver from initializing. This patch is necessary for the C-60. It doesn't have a PHY at port 3, so this caused the check in ar8xxx_is_possible to fail. As a result, the ethernet ports on the C-60 didn't work. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: mtdsplit_uimage: fix Edimax parserMathias Kresin2016-10-151-13/+7
| | | | | | | | | | | | | | According to the author the code was added to in preparation for adding support for a new board. The patch for the board was never send and the code never really tested. The edimax header starting with the edimax magic is put in front of the uImage header. There is no special uImage header used. Means, default magic and the type field is set to kernel as usual. Signed-off-by: Mathias Kresin <dev@kresin.me> edimax parser fix
* kernel: mtdsplit_uimage: fix rootfs offsetMathias Kresin2016-10-151-1/+1
| | | | | | | | The return value of the find_header function need to be added to the uimage_size, otherwise mtd_find_rootfs_from() might search for a rootfs within a custom header and fails. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mvsw61xx: enable SerDes on 6176 if requiredJonas Gorski2016-09-262-0/+59
| | | | | | | | If the cpu port is connected through SGMII we need to enable SerDes for it to work. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Felix Fietkau <nbd@nbd.name>
* mvsw61xx: reset phys on probe to enable switch ports on clearfog proJonas Gorski2016-09-262-1/+54
| | | | | | | | The clearfog u-boot does not initialize the switch at all, so we need to power up the phys ourselves. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Felix Fietkau <nbd@nbd.name>
* kernel: owl-loader for delayed Atheros ath9k fixupChristian Lamparter2016-09-191-0/+246
| | | | | | | | | | | | | | | | | | | | | | | | | Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway) need to be able to initialize the PCIe wifi device. Normally, this is done during the early stages of booting linux, because the necessary init code is read from the memory mapped SPI and passed to pci_enable_ath9k_fixup. However,this isn't possible for devices which have the init code for the Atheros chip stored on NAND in an UBI volume. Hence, this module can be used to initialze the chip when the user-space is ready to extract the init code. Martin Blumenstingl made a few fixes and added support for lantiq: kernel: owl-loader: add support for OWL emulation PCI devices kernel: owl-loader: don't re-scan the bus when ath9k_pci_fixup failed kernel: owl-loader: use dev_* instead of pr_* logging functions kernel: owl-loader: auto-generate the eeprom filename as fallback kernel: owl-loader: add a debug message when swapping the eeprom data kernel: owl-loader: add missing newlines in log messages kernel: owl-loader: add support for the lantiq platform These patches have been integrated. Thanks! Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
* kernel: b53: force BCM531x5 port 5 link state if enabledRafał Miłecki2016-09-081-0/+13
| | | | | | | | | | | Some devices (e.g. Tenda AC9 based on BCM47189B0) have BCM53125 with port 5 connected to the second Ethernet interface on the SoC. In such case there is no PHY and we need to force link manually. This assumes port 5 can be marked as enabled for such devices. It's not implemented yet unfortunately. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* swconfig: revert the portmapping patches, they seem to cause a segfaultJohn Crispin2016-08-161-0/+76
| | | | | | | | | | | | Revert "kernel/swconfig: remove obsolete portmapping feature from swconfig" This reverts commit 675407baa44a8700de20b6b2857009a552a807ba. Revert "swconfig: remove obsolete portmapping feature" This reverts commit fca1eb349ef31b133a62880cbd562d6bf17500aa. Signed-off-by: John Crispin <john@phrozen.org>
* kernel/swconfig: remove obsolete portmapping feature from swconfigJohn Crispin2016-08-151-76/+0
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* kernel: adm6996: set carrier statusMathias Kresin2016-08-101-0/+5
| | | | | | | Due to the missing carrier status set, the interface wasn't usable on a BTHOMEHUB2B after ip link down and up as it is done in preinit. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: remove unused morse led trigger driverFelix Fietkau2016-08-041-366/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: silence a false positive uninitialized variable warningFelix Fietkau2016-08-011-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* b53: allow ports with higher numbers than CPU portRafał Miłecki2016-07-241-2/+1
| | | | | | | | | | | | | | Our code was assuming CPU port uses the highest number. My BCM53573 device has eth0 connected to port 8 and eth1 connected to port 5. While working on support for it I tried to: 1) Enable all ports (including port 8) 2) Set CPU port to 5 I noticed port 8 is not accessible anymore. It was just a development process but it seems like something worth fixing anyway. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
* ledtrig-usbdev: fix duplicate match detectionFelix Fietkau2016-07-231-4/+5
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ledtrig-usbdev: use upstream function for iterating USB devicesRafał Miłecki2016-07-201-5/+27
| | | | | | This will allow us to drop LEDE patch adding usb_find_device_by_name. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* kernel: rename B53 symbols to avoid upstream kernel conflictRafał Miłecki2016-06-202-18/+18
| | | | | | | | | In kernel 4.7 there is upstreamed b53 driver using (mostly?) the same symbols as our b53 does. Change our symbols so both drivers can coexist in kernel tree. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
* kernel: mtdsplit: calculate kernel partition precisely for SeamaRafał Miłecki2016-06-201-2/+2
| | | | | | | | | So far "kernel" partition didn't contain just a kernel. It also included Seama header and meta data. This was making kernel update complex and it wasn't trivial to read kernel size. Fix it by making "kernel" parition contain just a kernel image. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* kernel: require admin permissions for swconfig set operationsFelix Fietkau2016-06-121-0/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: deny swconfig set requests for unprivileged usersJo-Philipp Wich2016-06-111-0/+3
| | | | | | | | | | | | | | | | | The swconfig kernel infrastructure fails to do any permissions checks when changing settings. As such an ordinary user account on a device with a switch can change switch settings without any special permissions. Routers generally have few non-admin users so this isn't a big hole, but it is a security hole. Likely the greatest danger is for multifunction devices which have a lot of extra daemons, compromising a low-security daemon would allow one to modify switch settings and cause the router/switch to appear to lock-up (or cause other sorts of troublesome nyetwork behavior). Implement a check for CAP_NET_ADMIN in swconfig_set_attr() and deny any requests originating from user contexts lacking this capability. Reported-by: Elliott Mitchell <ehem+openwrt@m5p.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* treewide: replace nbd@openwrt.org with nbd@nbd.nameFelix Fietkau2016-06-0718-20/+20
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* AR8216: improve mmd register accessJohn Crispin2016-03-043-13/+17
| | | | | | | | | | | Combine all bus operations for one MMD access in one function. Protecting all these bus operations with one lock also helps to avoid potential issues due to bus operations intercepting the register and data write. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 48914
generated by cgit v1.1 at 2024-12-13 20:40:42 +0000