summaryrefslogtreecommitdiff
path: root/target/linux/generic
Commit message (Collapse)AuthorAgeFilesLines
* kernel: use upstream accepted bcm47xxpart parsing fixRafał Miłecki2016-11-281-0/+3
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add missing config symbolsFelix Fietkau2016-11-241-0/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove pipetypes unused var warningKevin Darbyshire-Bryant2016-11-211-1/+11
| | | | | | | Update patch to remove pipetypes var declaration which was throwing unused variable warning due to the original patch removing the only use. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* kernel: add bcm47xxpart patch fixing parsing with some TRX formatsRafał Miłecki2016-11-201-0/+37
| | | | | | | | This fixes parsing partition placed after TRX with block-aligned length. It's important e.g. for Archer C9 which has TRX with kernel only and rootfs as separated partition. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: rtl8367(b): fix build errorMathias Kresin2016-11-192-2/+2
| | | | | | | | | | Fix build on targets not using CONFIG_MODULE_STRIPPED. Neither RTL8367_DRIVER_DESC nor RTL8367B_DRIVER_DESC are defined anywhere. It worked for targets using CONFIG_MODULE_STRIPPED since our module stripper no-ops the various module info macros. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: enable pcryptJason A. Donenfeld2016-11-163-3/+3
| | | | | | | | | This is a powerful API for parallel crypto from which many other modules can benefit. It only winds up being turned on on SMP systems, which means this adds 0 bytes to the kernel on tiny machines, while only adding a small bit to SMP systems for big performance improvements. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* kernel: update kernel 4.4 to version 4.4.32Stijn Tintel2016-11-165-53/+54
| | | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on all targets that use kernel 4.4 and aren't marked broken. Runtime-tested on ar71xx, octeon. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: update kernel 4.4 to version 4.4.31Koen Vandeputte2016-11-166-23/+18
| | | | | | | + Refresh patches compile/run-tested on cns3xxx & imx6. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath9k: add support for the HSR tuner of the Ubiquiti UAP Outdoor+Matthias Schiffer2016-11-151-0/+2
| | | | | | | | Without setting the HSR to the selected channel, the WLAN of the UAP Outdoor+ will exhibit high packet loss in RX. Based-on-patch-by: Stefan Rompf <stefan@loplof.de> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mac80211: rt2x00: fold patchesMathias Kresin2016-11-091-1/+0
| | | | | | | | The patch 615-rt2x00-fix_20mhz_clk.patch fixes code introduced by 611-rt2x00-rf_vals-rt3352-xtal20.patch and makes the the platform data property clk_is_20mhz obsolete. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: use upstreamed patch for BCM53573 support in bcm47xxsflashRafał Miłecki2016-11-081-2/+4
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bgmac: backport small DMA fixRafał Miłecki2016-11-074-4/+88
| | | | | | | | It's supposed to significantly improve performance but doesn't seem to affect Northstar unfortunately. It seems only some other platforms were limited because of this DMA setup mistake. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: fix bgmac regression causing BCM47186B0 SoC hangsRafał Miłecki2016-11-072-0/+65
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: update kernel 4.4 to version 4.4.30Stijn Segers2016-11-022-3/+3
| | | | | | | | | | This patch bumps the 4.4 kernel from .28 to .30 and refreshes the patches. Compile-tested on ar71xx, x86/64, ramips/mt7621, brcm47xx and kirkwood. Run-tested on ar71xx & ramips/mt7621, brcm47xx and kirkwood (last two confirmed by P. Wassi). Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* kernel: update kernel 4.4 to version 4.4.28Paul Wassi2016-10-313-11/+11
| | | | | | | | Refresh patches for all targets that support kernel 4.4. compile/run-tested on ar71xx, brcm47xx, kirkwood. Signed-off-by: Paul Wassi <p.wassi@gmx.at> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: deactivate CONFIG_QCOM_SPMI_TEMP_ALARMHauke Mehrtens2016-10-311-0/+1
| | | | | | This fixes the build of the ipq806x target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: mtdsplit: add support for WRGG imagesStijn Tintel2016-10-276-0/+118
| | | | | | | | Support splitting WRGG images, found in some D-Link devices (e.g. DAP-2695). Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* linux/mtd: add id for mx25u3235f needed by ZyXEL NBG6817André Valentin2016-10-261-0/+10
| | | | Signed-off-by: André Valentin <avalentin@marcant.net>
* kernel: backport MIPS's ioremap_cache from 4.5Rafał Miłecki2016-10-241-0/+29
| | | | | | It's needed by (updated) bcm47xxsflash driver. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add fix for CVE-2016-5195Stijn Tintel2016-10-242-0/+180
| | | | | | | | | | | Add fix for CVE-2016-5195 to kernel 3.18 and 4.1. Kernel 4.4 is already fixed since version 4.4.26 which was committed in 32c28a78f798dffb983a7f00342b471e5e4ac177. Patches taken from Sasha Levin's linux-stable git tree: http://git.kernel.org/cgit/linux/kernel/git/sashal/linux-stable.git/ Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: update kernel 3.18 to version 3.18.43Stijn Tintel2016-10-2427-147/+72
| | | | | | | | | | Refresh patches for all targets supporting 3.18 and not marked broken. Compile-tested on all targets using 3.18 and not marked broken. Changes to generic/610-netfilter_match_bypass_default_checks.patch based on 84d489f64f3b382d5544e342f66d8806e94e85d3. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: update kernel 4.1 to version 4.1.34Stijn Tintel2016-10-2433-189/+87
| | | | | | | | | | | | Refresh patches for all targets supporting 4.1 and not marked broken. Compile-tested on all targets using 4.1 and not marked broken. Changes to generic/610-netfilter_match_bypass_default_checks.patch based on 84d489f64f3b382d5544e342f66d8806e94e85d3. Changes to generic/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch based on a90ee92337d60fd14b6431adcda9929b955f3408. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: update kernel 4.4 to version 4.4.27Álvaro Fernández Rojas2016-10-231-2/+2
| | | | | | | Refresh patches for all targets that support kernel 4.4. compile/run-tested on brcm2708/bcm2710 only. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: drop usbdev LED triggerRafał Miłecki2016-10-197-467/+0
| | | | | | It was LEDE's trigger that was replaced by upstream usbport one. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* generic: ar8216: improve ar8xxx_is_possible checkChristian Lamparter2016-10-151-6/+6
| | | | | | | | | | | | | | | | | The commit "generic: ar8216: add sanity check to ar8216_probe" (774da6c7a40320a320b28d71291c0e61fcf7bc8a) stated that PHY IDs should be checked at address 0-4. However, the PHY 4 was never check by the loop. This patch extends the check to be similar to the Atheors SDK. It tries all 4 ports and skips unconnected PHYs if necessary. If it cannot find any familiar PHYs, it will prevent the phy driver from initializing. This patch is necessary for the C-60. It doesn't have a PHY at port 3, so this caused the check in ar8xxx_is_possible to fail. As a result, the ethernet ports on the C-60 didn't work. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: mtdsplit_uimage: fix Edimax parserMathias Kresin2016-10-151-13/+7
| | | | | | | | | | | | | | According to the author the code was added to in preparation for adding support for a new board. The patch for the board was never send and the code never really tested. The edimax header starting with the edimax magic is put in front of the uImage header. There is no special uImage header used. Means, default magic and the type field is set to kernel as usual. Signed-off-by: Mathias Kresin <dev@kresin.me> edimax parser fix
* kernel: mtdsplit_uimage: fix rootfs offsetMathias Kresin2016-10-151-1/+1
| | | | | | | | The return value of the find_header function need to be added to the uimage_size, otherwise mtd_find_rootfs_from() might search for a rootfs within a custom header and fails. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: add missing config symbol (partial forward port of d2f4479870)Felix Fietkau2016-10-041-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing symbols for Linux 3.18 (like d2f4479870)Felix Fietkau2016-10-041-0/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing symbols for Linux 4.1Jo-Philipp Wich2016-10-041-0/+3
| | | | | | | Add some missing symbols to the generic 4.1 kernel config which got triggered by the introduction of the hda-intel sound module. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: backport usbport LED trigger from 4.9Rafał Miłecki2016-10-044-0/+931
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* netfilter: fix file conflicts between kmod-ipt- and kmod-nft- packagesMatthias Schiffer2016-09-303-0/+3
| | | | | | | | The nf_reject_* and nf_nat_masquerade_* modules are moved into the corresponding kmod-nf- packages. Appropriate dependencies are added to the kmod-nft- packages. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: update to v4.4.23Álvaro Fernández Rojas2016-09-307-36/+32
| | | | | | | Refresh patches for all targets that support kernel 4.4. compile/run-tested on brcm2708/bcm2710 only. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to version 4.4.22Stijn Segers2016-09-305-19/+20
| | | | | | Forgot to update kernel-version.mk, so updated patch. Compile-tested on x86/64 and ar71xx; run-tested on x86/64 and ar71xx. Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
* kernel: add missing config symbolsFelix Fietkau2016-09-291-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix build error in sign-file.c with libresslFelix Fietkau2016-09-291-0/+16
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing config symbolsFelix Fietkau2016-09-291-0/+7
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing config symbolsFelix Fietkau2016-09-281-1/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing config symbol after rfkill changeFelix Fietkau2016-09-281-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rfkill: add fake rfkill supportJohn Crispin2016-09-271-0/+87
| | | | | | allow building of modules depending on RFKILL even if RFKILL is not enabled. Signed-off-by: John Crispin <john@phrozen.org>
* mvsw61xx: enable SerDes on 6176 if requiredJonas Gorski2016-09-262-0/+59
| | | | | | | | If the cpu port is connected through SGMII we need to enable SerDes for it to work. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Felix Fietkau <nbd@nbd.name>
* mvsw61xx: reset phys on probe to enable switch ports on clearfog proJonas Gorski2016-09-262-1/+54
| | | | | | | | The clearfog u-boot does not initialize the switch at all, so we need to power up the phys ourselves. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Felix Fietkau <nbd@nbd.name>
* kernel: owl-loader for delayed Atheros ath9k fixupChristian Lamparter2016-09-192-0/+277
| | | | | | | | | | | | | | | | | | | | | | | | | Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway) need to be able to initialize the PCIe wifi device. Normally, this is done during the early stages of booting linux, because the necessary init code is read from the memory mapped SPI and passed to pci_enable_ath9k_fixup. However,this isn't possible for devices which have the init code for the Atheros chip stored on NAND in an UBI volume. Hence, this module can be used to initialze the chip when the user-space is ready to extract the init code. Martin Blumenstingl made a few fixes and added support for lantiq: kernel: owl-loader: add support for OWL emulation PCI devices kernel: owl-loader: don't re-scan the bus when ath9k_pci_fixup failed kernel: owl-loader: use dev_* instead of pr_* logging functions kernel: owl-loader: auto-generate the eeprom filename as fallback kernel: owl-loader: add a debug message when swapping the eeprom data kernel: owl-loader: add missing newlines in log messages kernel: owl-loader: add support for the lantiq platform These patches have been integrated. Thanks! Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
* ubifs: add full overlayfs supportFelix Fietkau2016-09-194-0/+738
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update kernel 4.4 to version 4.4.21Álvaro Fernández Rojas2016-09-166-217/+7
| | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on brcm2708 only. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: update kernel 4.4 to version 4.4.20Álvaro Fernández Rojas2016-09-153-5/+5
| | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on brcm2708 only. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: Backport pending appended DTB handling patchesDaniel Gimpelevich2016-09-124-34/+289
| | | | | | | | | | Backport patches from upstream Linux kernel which are making the kernel stores the appended dtb not in the same resisters as defined in the UHI specification, use a separate variable on MIPS. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> [some modifications] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: mtd: backport Macronix sector size fixMathias Kresin2016-09-031-0/+27
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: b53: force BCM531x5 port 5 link state if enabledRafał Miłecki2016-09-081-0/+13
| | | | | | | | | | | Some devices (e.g. Tenda AC9 based on BCM47189B0) have BCM53125 with port 5 connected to the second Ethernet interface on the SoC. In such case there is no PHY and we need to force link manually. This assumes port 5 can be marked as enabled for such devices. It's not implemented yet unfortunately. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: move bcma BCM53573 patch to bcma 4.9 backportsRafał Miłecki2016-09-081-22/+0
| | | | | | This patch has been accepted for 4.9. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>