summaryrefslogtreecommitdiff
path: root/target/linux/imx6/profiles
Commit message (Collapse)AuthorAgeFilesLines
* imx6: move profile definitions to the image/MakefileJohn Crispin2016-05-233-53/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* imx6: remove obsolete VENTANA_DTS from profileLuka Perkov2015-11-181-15/+0
| | | | | | | | The device-tree files are now specified in the image Makefile Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47512
* imx6: add Gateworks GW551x supportLuka Perkov2015-11-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Upstream patch: e9d6d6b62f306ba83e1441af5daf2809a6167474 Add support for the Gateworks GW5510 board featuring: * i.MX6 SoC * up to 512MB DDR3 * up to 2GB NAND flash * 1x miniPCIe socket (with USB) * HDMI out (micro-HDMI) * HDMI in (micro-HDMI) (currently supported by only vendor kernel) * TTL level I/O (supported by GW16111 breakout board): * I2C * 2x UART * CAN * 2x DIO (GPIO/PWM) * USB OTG Also add support to OpenWrt build system Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47505
* imx6: put uboot-envtools in DEFAULT_PACKAGESLuka Perkov2015-04-172-4/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45478
* kernel/modules: fix chipideaJohn Crispin2014-12-113-3/+3
| | | | | | | | | | it should needs to depend on imx and mxs also remove duplicate kmod definition from mxs target Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43627
* imx6: kernel: add GW5520 supportLuka Perkov2014-08-111-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | The GW5520 is a small form-factor single-board computer with the following features: * 70x100mm form-factor * IMX6DL 800MHz SoC (IMX6Q optional) * 512MB 32bit DDR3 SDRAM (up to 2GB optional) * 256MB NAND FLASH (up to 2GB optional) * Gateworks System Controller * 2x front-panel Intel i210 GbE adapters with passive PoE support * 2x MiniPCIe sockets with USB support * 2x front-panel USB * 1x rear-panel full-size HDMI connector * 1x front-panel bi-color user LED * 1x front-panel user pushbutton * 1x rear-panel barrel jack for power * 1x Application connector with: * 2x TTL level UARTs * 10x TTL level Digital IO Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42148
* imx6: kernel: add GW16083 Ethernet Expansion Mezzanine supportLuka Perkov2014-08-111-1/+1
| | | | | | | | | | | | | | | | The GW16083 Ethernet Expansion Mezzanine adds the following to supported Gateworks baseboards: * 7-port Ethernet Switch * 4x RJ45 ports (ENET1-4) supporing 802.11af/at PoE (with optional PoE module) * 2x RJ45 ports or SFP module (ENET5-6) (auto-selected) This series adds support for a phy driver that adds support for ENET5/ENET6 PHY adding initialization for those PHY's and a polling mechanism that detects SFP insertion and configuration. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42147
* imx6: ventana: remove non-trunk packages from defaultsLuka Perkov2014-06-021-1/+0
| | | | | | | | | The canutils package is in the packages repo and not part of trunk, so we should not enable them by default. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 40991
* imx6: ventana: add default kernel modulesLuka Perkov2014-06-021-1/+2
| | | | | | | | | | | | Add the following kernel modules by default (which are present on most Ventana baseboards): - kmod-leds-gpio (user leds) - kmod-sound-core (required as a dependency of the other sound modules) - kmod-pps-gpio (Pulse-Per-Second) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 40990
* imx6-gateworks: enable new canbus packagesLuka Perkov2014-04-191-2/+2
| | | | | | | | | The canbus package was recently changed to a more active project. This patch updates the default package names to include the same functionality as before. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 40531
* imx6: update Ventana dtsLuka Perkov2014-02-201-2/+6
| | | | | | | | | | | Update the Ventana device-tree to match upstream: - Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx - align pinctrl with upstream - consolidate multiple patches into one Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39644
* imx6: ventana: add canbus utilsLuka Perkov2013-12-171-1/+2
| | | | | | | | | Some of the Gateworks Ventana boards have CAN bus support, therefore we will install the userspace utils. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39113
* imx6: ventana: add default kernel modules for GSCLuka Perkov2013-12-171-0/+1
| | | | | | | | | | | | | All Gateworks Ventana boards have a Gateworks System Controller which emulates the following: - ds1672 RTC - pca953x GPIO expander - hardware monitor - at24 eeprom Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39112
* imx6: add canbus support for Ventana boardsLuka Perkov2013-12-111-0/+1
| | | | | | | | GW5400, GW5300, and GW5200 have CAN bus option. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39034
* imx6: add support for GW53xxLuka Perkov2013-12-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The Gateworks GW53xx family of products is based on the Freescale i.MX6DL SoC and offers a small form-factor with peripherals such as: * i.MX6DL * NAND FLASH * 4x PCIe * 4x USB EHCI (1x front-panel; 3x PCIe sockets) * 1x USB OTG * 1x uSD * LVDS connector (VLDS for display, PWM/GPIO for backlight, i2c for touch) * HDMI Audio/Video out * Analog Video in * Digital IO * Gateworks System Controller * Accelerometer * Canbus * Optional GPS * Industrial temp (-40C to +85C) * DC input voltage 8 to 42V (Passive PoE and 802.3af) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39012
* imx6: build images for ventana boards that are supportedLuka Perkov2013-11-181-0/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38859
* imx6: merge all gateworks boards into one profileLuka Perkov2013-11-181-34/+17
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38858
* imx6: add support for more then one nand type per profileLuka Perkov2013-11-181-3/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38857
* imx6: update gateworks profile with extra packagesLuka Perkov2013-10-301-3/+6
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38579
* imx6: ventana boards use kmod-sky2Luka Perkov2013-10-231-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38522
* imx6: reorganize build systemLuka Perkov2013-10-183-0/+72
| | | | | | | | | | | | Changes include: * switching to profiles * adding ubifs support * building image for GW54XX board Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38441
* imx6: add default profileLuka Perkov2013-10-021-0/+19
Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38282
generated by cgit v1.1 at 2024-11-16 21:52:02 +0000