summaryrefslogtreecommitdiff
path: root/target/linux/imx6
Commit message (Collapse)AuthorAgeFilesLines
* imx6: image: Add missing kernel prefixJohn Crispin2016-03-041-0/+1
| | | | | | Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 48909
* base-files: remove default /etc/config/network, generate it via board.d insteadFelix Fietkau2016-01-251-3/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48493
* imx6: drop 4.1 supportLuka Perkov2016-01-1813-2862/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 48300
* imx6: drop 4.3 supportLuka Perkov2016-01-1818-2978/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 48299
* imx6: move to 4.4 kernelLuka Perkov2016-01-181-1/+1
| | | | | | Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48298
* imx6: kernel: Add Micrel PHY used on Apalis SOMFelix Fietkau2016-01-151-0/+1
| | | | | | | Signed-off-by: Petr Štetiar <ynezz@true.cz> Cc: Luka Perkov <luka@openwrt.org> SVN-Revision: 48249
* imx6: add 4.4 supportFelix Fietkau2016-01-1518-0/+2922
| | | | | | | | | | | | | | Build and boot tested on the following hardware: * GW54xx * GW53xx * GW52xx * GW51xx * GW552x * GW551x Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48248
* kernel/4.3: update to version 4.3.3Hauke Mehrtens2016-01-1215-172/+108
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de SVN-Revision: 48224
* imx6: images: ventana: change name of ubi outputLuka Perkov2015-12-291-3/+4
| | | | | | | | | | | | | | Change the name of the .ubi produced to strip out the word 'factory'. This is mainly due to the fact that there is no difference between the Ventana 'factory' image vs the standard image. Name changes from: openwrt-imx6-ventana-squashfs.nand-factory_<size>.ubi to openwrt-imx6-ventana-squashfs-nand_<size>.ubi Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48016
* imx6: fix device-tree mac address assignment for ventana sky2/eth1Luka Perkov2015-12-282-0/+54
| | | | | | | | | | | | | | Some Ventana boards have a Marvell sky2 GigE controller as eth1 however assigning the mac address through device-tree is difficult because the PCI slot can move around depending on board configuration and slot population. To work around this we add a patch to the sky2 driver to allow accessing its mac address via a device-tree alias. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48013
* imx6: add i2c retries for Ventana /dev/i2c-0Luka Perkov2015-12-281-0/+24
| | | | | | | | | | | | | | On Ventana boards the Gateworks System Controller is the only device on I2C1 (/dev/i2c-0) and it can NAK transfers if it is busy in an ADC loop. Because this is a multi-function device with several slave addresses it is best to add retries at the controller level instead of within each slave driver. This adds a patch that adds 3 retries for i2c transactions only for Ventana boards and only for I2C1 Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48012
* imx6: imx: thermal: use CPU temperature grade info for thresholdsLuka Perkov2015-12-281-0/+114
| | | | | | | | | | | | | | | This is a backport of a2291badc355d58ead5c19ae0609468947416040 from thermal-soc accepted upstream. The IMX6Q/IMX6DL SoC's have a 2-bit temperature grade stored in OTP. Instead of assuming 85C for passive cooling threshold and 100C for critical base these thresholds off the thermal gade max CPU temperature: - passive threshold: max - 10C - critical threshold: max - 5C Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 48011
* imx6: Add pwm nodesLuka Perkov2015-12-281-0/+276
| | | | | | | | Upstream status: Accepted Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48010
* imx6: ventana: add ecspi3 host controller for GW52xxLuka Perkov2015-12-281-0/+35
| | | | | | | | | | Certain board revisions of the GW52xx support an SPI host controller with a single chip-select going to an off board connector. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48009
* imx6: Add 4.3 supportLuka Perkov2015-12-2812-0/+2539
| | | | | | | | | | | | | | Build and boot tested on the following hardware: * GW54xx * GW53xx * GW52xx * GW51xx * GW552x * GW551x Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48008
* imx6: drop lingering filesLuka Perkov2015-12-282-1072/+0
| | | | | | | | Since 3.18 kernel support was dropped, remove lingering files. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48007
* all: drop old uci-defaults.shJo-Philipp Wich2015-12-111-1/+1
| | | | | | | | | Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one and update all users accordingly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47867
* all: remove redundant board.d/00_model filesJo-Philipp Wich2015-12-041-13/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47753
* imx6: switch from uci-defaults to board.dJo-Philipp Wich2015-12-032-8/+17
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47738
* imx6: ventana: remove invalid video options from bootscriptLuka Perkov2015-11-201-75/+1
| | | | | | | | | Removed video related kernel params that are only appropriate for the Freescale downstream vendor kernel and not appriate for mainline linux. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47532
* imx6: refresh patchesLuka Perkov2015-11-197-44/+9
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 47513
* imx6: remove obsolete VENTANA_DTS from profileLuka Perkov2015-11-181-15/+0
| | | | | | | | The device-tree files are now specified in the image Makefile Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47512
* imx6: add Vetnana LVDS supportLuka Perkov2015-11-183-0/+150
| | | | | | | | These patches have been submitted to upstream Linux and are pending acceptance. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47511
* imx6: ventana: fix GW16083 device-tree patchLuka Perkov2015-11-181-16/+16
| | | | | | | | | | The 206-ARM-imx-ventana-added-GW16083-to-device-tree.patch merged wrong in the conversion from 3.18 to 4.1. This patch resolves that and puts the device-tree nodes in the correct place. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47510
* imx6: drop support for kernel 3.18Luka Perkov2015-11-1810-1384/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 47509
* imx6: convert ventana images to squashfs+ubifs overlayLuka Perkov2015-11-183-111/+285
| | | | | | | | | | | | | | | | | | | | | | Replace the ventana ubi images from a single rootfs volume containing the rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs' squasfs volume, and rootfs_data an empty ubifs volume. At the same time move ventana image creation over to using the new TARGET_DEVICE syntax as a cleanup. Additionally removed FIT image creation as it is recommended that this be done manually to produce signed FIT images if needed. Note that a bootscript is needed for Ventana to change its default mtdparts to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there are patches in OpenWrt kernels that try to auto-attach and auto-mount and these get in the way if the mtd partition is named 'rootfs'. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47508
* imx6: kernel: add UBI_BLOCK supportLuka Perkov2015-11-181-1/+1
| | | | | | | | UBI_BLOCK support is needed for mounting squashfs over UBI Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47507
* imx6: switch to v4.1Luka Perkov2015-11-181-1/+1
| | | | | | Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47506
* imx6: add Gateworks GW551x supportLuka Perkov2015-11-183-0/+507
| | | | | | | | | | | | | | | | | | | | | | | | | Upstream patch: e9d6d6b62f306ba83e1441af5daf2809a6167474 Add support for the Gateworks GW5510 board featuring: * i.MX6 SoC * up to 512MB DDR3 * up to 2GB NAND flash * 1x miniPCIe socket (with USB) * HDMI out (micro-HDMI) * HDMI in (micro-HDMI) (currently supported by only vendor kernel) * TTL level I/O (supported by GW16111 breakout board): * I2C * 2x UART * CAN * 2x DIO (GPIO/PWM) * USB OTG Also add support to OpenWrt build system Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47505
* kernel: update kernel 3.18 to version 3.18.23Hauke Mehrtens2015-11-011-5/+5
| | | | | | | | | | Changelog: * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.22 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.23 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47334
* imx6: add v4.1 supportFelix Fietkau2015-11-019-0/+2246
| | | | | | | | | | | | | Build and boot tested on the following hardware: * GW54xx * GW53xx * GW52xx * GW51xx Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47331
* imx6: image: Remove custom mkfs targz override as base should be fine nowFelix Fietkau2015-10-311-5/+0
| | | | | | | | | It was wrong anyway, missing file sort order parameter which was fixed in base month ago. Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47312
* imx6: image: Refactor sanitize_profile_name using PROFILE_SANITIZED variableFelix Fietkau2015-10-311-13/+9
| | | | | | Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47308
* imx6: fix platform checkingLuka Perkov2015-10-102-8/+8
| | | | | | | | Fix platform checking when configuring networks and when doing sysupgrade. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47168
* imx6: disable ext2/ext3 filesystem support (ext4 is enough)Felix Fietkau2015-09-241-8/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47032
* imx6: add platform_pre_upgrade for sysupgradeRafał Miłecki2015-09-151-1/+11
| | | | | | | | | | | | | | | | We're in process of cleaning nand_do_platform_check. Currently is leaves a special mark in /tmp/sysupgrade-nand-path triggering some diffent code path in nand_upgrade_stage1. This can be a bit confusing. The plan is to have the check function only check the image and nothing else. Then platform code (platform_pre_upgrade) should trigger NAND specific upgrade path. This is what this patch implements. This follows ar71xx, lantiq and partially bcm53xx. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46944
* kernel: update 3.18 to 3.18.14Jonas Gorski2015-05-211-1/+1
| | | | | | | | | | | | | | Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14 Build tested on brcm63xx and ipq806x, runtested on brcm63xx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45711
* imx6: put uboot-envtools in DEFAULT_PACKAGESLuka Perkov2015-04-173-4/+4
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45478
* imx6: add missing patches from 3.14Luka Perkov2015-04-113-0/+678
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45378
* imx6: drop 3.14Luka Perkov2015-04-1127-6247/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45371
* imx6: switch to 3.18Luka Perkov2015-04-111-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45370
* imx: add initial version of 3.18 supportLuka Perkov2015-03-299-0/+1786
| | | | | | | | This is build tested only. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45125
* kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLEDJohn Crispin2015-03-061-1/+0
| | | | | | | | | Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since only one platfrom (omap) needs them. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 44614
* kernel: disbale HAMRADIO in generic configJohn Crispin2015-03-061-1/+0
| | | | | | | | | | | | | | | HAMRADIO enabled in all generic configs, but no one platform directly use related drivers/protocols. This symbol is only used for kmod-ax25 package modules. Furthermore, half of platforms explicitly disables this symbol, what silently disables build of modules for kmod-ax25 package. So disable HAMRADIO by-default in generic config, add it to kmod-ax25 package and remove it from platform specific configs. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 44613
* kernel: remove GENERIC_NET_UTILS from platform configsJohn Crispin2015-03-061-1/+0
| | | | | | | | | | CONFIG_GENERIC_NET_UTILS is selected by CONFIG_NET and already enabled in generic config, so we don't need this symbol in platform specific configurations. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 44611
* kernel: update 3.14 to 3.14.28Luka Perkov2015-01-113-11/+11
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 43929
* kernel/modules: fix chipideaJohn Crispin2014-12-113-3/+3
| | | | | | | | | | it should needs to depend on imx and mxs also remove duplicate kmod definition from mxs target Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43627
* kernel: refresh patchesFelix Fietkau2014-12-083-7/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43564
* imx6: make the default config bootable on ventanaJohn Crispin2014-11-241-3/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43369
* kernel: makefiles: make use of new var KERNEL_PATCHVERFelix Fietkau2014-10-241-1/+1
| | | | | | | | | | | replace all occurences of LINUX_VERSION with the cleaner approach. future kernel upgrades must mostly touch only one file. the only platform left is netlogic, because it uses a intermediate kernel 3.14.16 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 43047
generated by cgit v1.1 at 2024-12-18 12:03:19 +0000