summaryrefslogtreecommitdiff
path: root/target/linux/imx6
Commit message (Collapse)AuthorAgeFilesLines
* imx6: fix platform checkingLuka Perkov2015-10-102-8/+8
| | | | | | | | Fix platform checking when configuring networks and when doing sysupgrade. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47168
* imx6: disable ext2/ext3 filesystem support (ext4 is enough)Felix Fietkau2015-09-241-8/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47032
* imx6: add platform_pre_upgrade for sysupgradeRafał Miłecki2015-09-151-1/+11
| | | | | | | | | | | | | | | | We're in process of cleaning nand_do_platform_check. Currently is leaves a special mark in /tmp/sysupgrade-nand-path triggering some diffent code path in nand_upgrade_stage1. This can be a bit confusing. The plan is to have the check function only check the image and nothing else. Then platform code (platform_pre_upgrade) should trigger NAND specific upgrade path. This is what this patch implements. This follows ar71xx, lantiq and partially bcm53xx. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46944
* kernel: update 3.18 to 3.18.14Jonas Gorski2015-05-211-1/+1
| | | | | | | | | | | | | | Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14 Build tested on brcm63xx and ipq806x, runtested on brcm63xx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45711
* imx6: put uboot-envtools in DEFAULT_PACKAGESLuka Perkov2015-04-173-4/+4
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45478
* imx6: add missing patches from 3.14Luka Perkov2015-04-113-0/+678
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45378
* imx6: drop 3.14Luka Perkov2015-04-1127-6247/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45371
* imx6: switch to 3.18Luka Perkov2015-04-111-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45370
* imx: add initial version of 3.18 supportLuka Perkov2015-03-299-0/+1786
| | | | | | | | This is build tested only. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45125
* kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLEDJohn Crispin2015-03-061-1/+0
| | | | | | | | | Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since only one platfrom (omap) needs them. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 44614
* kernel: disbale HAMRADIO in generic configJohn Crispin2015-03-061-1/+0
| | | | | | | | | | | | | | | HAMRADIO enabled in all generic configs, but no one platform directly use related drivers/protocols. This symbol is only used for kmod-ax25 package modules. Furthermore, half of platforms explicitly disables this symbol, what silently disables build of modules for kmod-ax25 package. So disable HAMRADIO by-default in generic config, add it to kmod-ax25 package and remove it from platform specific configs. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 44613
* kernel: remove GENERIC_NET_UTILS from platform configsJohn Crispin2015-03-061-1/+0
| | | | | | | | | | CONFIG_GENERIC_NET_UTILS is selected by CONFIG_NET and already enabled in generic config, so we don't need this symbol in platform specific configurations. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 44611
* kernel: update 3.14 to 3.14.28Luka Perkov2015-01-113-11/+11
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 43929
* kernel/modules: fix chipideaJohn Crispin2014-12-113-3/+3
| | | | | | | | | | it should needs to depend on imx and mxs also remove duplicate kmod definition from mxs target Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43627
* kernel: refresh patchesFelix Fietkau2014-12-083-7/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43564
* imx6: make the default config bootable on ventanaJohn Crispin2014-11-241-3/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43369
* kernel: makefiles: make use of new var KERNEL_PATCHVERFelix Fietkau2014-10-241-1/+1
| | | | | | | | | | | replace all occurences of LINUX_VERSION with the cleaner approach. future kernel upgrades must mostly touch only one file. the only platform left is netlogic, because it uses a intermediate kernel 3.14.16 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 43047
* targets: remove useless quotes around KERNELNAMEFelix Fietkau2014-10-051-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42780
* kernel: update 3.14 to 3.14.18Luka Perkov2014-09-101-1/+1
| | | | | | | | Targets were build tested and patches are refreshed. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42463
* imx6: fix image build for Generic profile.Luka Perkov2014-09-091-5/+7
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 42455
* imx6: refresh patchesLuka Perkov2014-08-252-6/+6
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42297
* imx6: kernel: backport upstream fix for IMX6DL 800MHz speed gradeLuka Perkov2014-08-251-0/+76
| | | | | | | | | | | | | | A previous backported patch that adds freq/voltage operating points for the IMX6DL processor can cause hang/crash (general instability) on IMX6DL processors in the industrial/automative speed grades as they don't support 1GHz operation. This adds another backported patch from mainline that uses IMX6 fuse settings to properly remove invalid operating points for the particular CPU grade used. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42294
* imx6: update kernel configLuka Perkov2014-08-111-3/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42149
* imx6: kernel: add GW5520 supportLuka Perkov2014-08-118-2/+441
| | | | | | | | | | | | | | | | | | | | | | | | The GW5520 is a small form-factor single-board computer with the following features: * 70x100mm form-factor * IMX6DL 800MHz SoC (IMX6Q optional) * 512MB 32bit DDR3 SDRAM (up to 2GB optional) * 256MB NAND FLASH (up to 2GB optional) * Gateworks System Controller * 2x front-panel Intel i210 GbE adapters with passive PoE support * 2x MiniPCIe sockets with USB support * 2x front-panel USB * 1x rear-panel full-size HDMI connector * 1x front-panel bi-color user LED * 1x front-panel user pushbutton * 1x rear-panel barrel jack for power * 1x Application connector with: * 2x TTL level UARTs * 10x TTL level Digital IO Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42148
* imx6: kernel: add GW16083 Ethernet Expansion Mezzanine supportLuka Perkov2014-08-118-1/+1843
| | | | | | | | | | | | | | | | The GW16083 Ethernet Expansion Mezzanine adds the following to supported Gateworks baseboards: * 7-port Ethernet Switch * 4x RJ45 ports (ENET1-4) supporing 802.11af/at PoE (with optional PoE module) * 2x RJ45 ports or SFP module (ENET5-6) (auto-selected) This series adds support for a phy driver that adds support for ENET5/ENET6 PHY adding initialization for those PHY's and a polling mechanism that detects SFP insertion and configuration. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42147
* imx6: kernel: add GW16082 miniPCI Expansion Mezzanine supportLuka Perkov2014-08-112-0/+114
| | | | | | | | | | The GW16082 miniPCI Expansion Mezzanine has the INTA/B/C/D IRQ's reversed from the PCI standard. This will soon be resolved in the bootloader via devicetree, but in the meantime this will work around the issue. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42146
* imx6: kernel: fix occasional link failureLuka Perkov2014-08-111-0/+38
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42145
* imx6: kernel: backport an upstream pci hang fixLuka Perkov2014-08-111-0/+86
| | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42144
* imx6: update upstream patchLuka Perkov2014-08-082-55/+42
| | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42081
* imx6: drop 3.10 supportLuka Perkov2014-08-0853-7141/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42075
* imx6: switch to 3.14Luka Perkov2014-08-081-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42074
* imx6: update upstream patchesLuka Perkov2014-08-084-21/+22
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42073
* imx6: backport IMX6DL DVFS support from 3.15Luka Perkov2014-08-081-0/+47
| | | | | | | | This allows dynamic voltage and frequency scaling to work for IMX6DL CPU's. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42072
* imx6: drop ventana kernel/rootfs hackLuka Perkov2014-08-081-3/+3
| | | | | | | | | In r41578 this was added in order to make default images bootable for the BB release. We need more generic approach for this. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42071
* target/linux/*/image/Makefile: use new dts path variableJohn Crispin2014-07-211-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41791
* kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>John Crispin2014-07-201-1/+1
| | | | SVN-Revision: 41776
* kernel: sort Kconfig options in kernel configsGabor Juhos2014-07-132-3/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41614
* imx6: put kernel and dtb into rootfs by defaultJohn Crispin2014-07-101-3/+3
| | | | | | | | this will make the rc1 images boot with the default config. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41578
* kernel: update 3.10.36->3.10.44John Crispin2014-06-261-1/+1
| | | | | | | | 205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41351
* imx6: move imx6.sh to /lib/ for consistencyLuka Perkov2014-06-263-2/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 41339
* imx6: add sysupgrade supportJohn Crispin2014-06-191-0/+19
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41277
* imx6: the script populating /tmp/sysinfo/ was in the wrong pathJohn Crispin2014-06-192-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41276
* imx6: fix typo on wandboard detectionFlorian Fainelli2014-06-181-1/+1
| | | | | | | | | Revision r41256 introduced a typo (wandaboard => wandboard), but later revisions expect to match on "wandboard" Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 41262
* imx6: use /lib/imx6.sh inside the uci-defaults scriptJohn Crispin2014-06-181-11/+9
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41257
* imx6: add a script to detect the board name and populate /tmp/sysinfoJohn Crispin2014-06-181-0/+63
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41256
* kernel: make sure the new UBIBLOCK symbol does not break buildsJohn Crispin2014-06-112-0/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41134
* kernel: add a NAND_SUPPORT symbolJohn Crispin2014-06-111-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41122
* imx6: kernel: update 3.14 pcie patchesLuka Perkov2014-06-044-43/+151
| | | | | | | | | Remove old irq map patch and replace it with the propper upstream patches allowing IMX6 PCIe devices behind PCIe switches to work properly. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 41004
* imx6: ventana: remove non-trunk packages from defaultsLuka Perkov2014-06-021-1/+0
| | | | | | | | | The canutils package is in the packages repo and not part of trunk, so we should not enable them by default. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 40991
* imx6: ventana: add default kernel modulesLuka Perkov2014-06-021-1/+2
| | | | | | | | | | | | Add the following kernel modules by default (which are present on most Ventana baseboards): - kmod-leds-gpio (user leds) - kmod-sound-core (required as a dependency of the other sound modules) - kmod-pps-gpio (Pulse-Per-Second) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 40990