summaryrefslogtreecommitdiff
path: root/target/linux/ramips/base-files/lib
Commit message (Collapse)AuthorAgeFilesLines
* ramips: add subtarget for mt7688John Crispin2015-07-241-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46473
* ramips: add support for STORYLiNK SAP-G3200U3John Crispin2015-07-242-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | STORYLiNK SAP-G3200U3 is an AC1200 router based on MT7621AT+MT7602EN+MT7612EN. It has 128MB DDR3, 8MB NOR FLASH, 5-port Gbps switch and 1x USB 3.0. The following patch adds support for this device. Tested and working: * ethernet * both WiFi radios * USB 3.0 * buttons * ethernet switch and USB diag LEDs * UART * GPIOs Tested and not working: * LEDs for WiFi radios (connected with WiFi chips, not supported in mt76?) * failsafe mode (known problem, needs workaround like other MTK based devices) More information in Wiki: http://wiki.openwrt.org/toh/storylink/sap-g3200u3 Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46454
* ramips: add support for Planex MZK-DP150NJohn Crispin2015-07-172-0/+4
| | | | | | | | | This patch add support for Planex MZK-DP150N. a mini router on the MT7620A SoC with one Ethernet port and a 802.11n 2.4 GHz radio. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> SVN-Revision: 46405
* ramips: adding support for OY-0001 Wireless RouterJohn Crispin2015-07-142-0/+4
| | | | | | | | | | Adding support for OY-0001 Wireless Router. OY-0001 is a wireless router made by oyewifi.com. Below is the details: MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN. Signed-off-by: Tom Deng <2579131212@qq.com> SVN-Revision: 46349
* ramips: Add Support for the Linksys RE6500John Crispin2015-06-182-0/+4
| | | | | | | | | | This patch adds support for the Linksys RE6500 Range Extender http://wiki.openwrt.org/toh/linksys/re6500 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 46043
* ramips: Add support for the D-Link DCS-930 B1John Crispin2015-06-182-0/+4
| | | | | | | | http://wiki.openwrt.org/toh/d-link/dcs-930l Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 46042
* ramips: add support for PandoraBox PBR-M1John Crispin2015-06-182-0/+4
| | | | | | | | | This patch is for PandoraBox PBR-M1 which is based on mt7621, all the features work fine, including rtc, leds, button, usb3.0, etc. Signed-off-by: tymon <banglang.huang@foxmail.com> SVN-Revision: 46041
* ramips: Add support for RT5350F-OLinuXino V2John Crispin2015-06-052-0/+8
| | | | | | | | | | | Version 2 : White spaces and alphabetical order problems fixed Support for Olimex RT5350F-OLinuXino Boards, tested with RT5350F-OLinuXino and RT5350F-OLinuXino-EVB boards. More Info : https://www.olimex.com/Products/OLinuXino/RT5350F/RT5350F-OLinuXino/open-source-hardware Signed-off-by: Dimitar Gamishev HeHoPMaJIeH <gamishev@gmail.com> SVN-Revision: 45902
* ramips: implement sysupgrade support for whr-300hp2Felix Fietkau2015-05-291-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45842
* ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile RouterJohn Crispin2015-05-232-0/+4
| | | | | | | | | | MR-102N is a RT3050F based wireless router(32M RAM + 8M NOR flash) with 1 USB and 1 ethernet port. The original product information can be found at: http://www.aximcom.com/en/MR-102N Signed-off-by: Tai-hwa Liang <atliang@gmail.com> SVN-Revision: 45724
* ramips: add support for Comfast CF-WR800NJohn Crispin2015-05-232-0/+4
| | | | | | | | | This patch adds support for Comfast CF-WR800N, a wall-plug wireless router based on the MT7620N SoC with one Ethernet port and a 802.11n 2.4 GHz radio. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 45722
* ramips: Add support for Microduino MicroWRTJohn Crispin2015-04-092-0/+4
| | | | | | | | | | | | | | | | MicroWRT is an wireless router with 2 USB,1 ethernet port. It has a 16M flash and 64M DDR2 RAM. You can use most interface, such as i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to combine with the core board. The detailed information, please refer to https://www.microduino.cc/wiki/index.php?title=Main_Page This patch adds support for it. Because there is only one port,so disabled VLAN and use eth0 as lan port. and only a power LED control by power pin. Signed-off-by: 盛凯 <shengkai81@gmail.com> SVN-Revision: 45331
* ramips: Add support for ZTE Q7John Crispin2015-04-012-0/+4
| | | | | | | | | | | | | | | ZTE Q7 is a wireless router with SD Card,USB,1 ethernet port and a battery.It used MT7620a SoC. I can,t find any information about this router on ZTE's website. But I found this : http://en.cctairmobi.com/plus/list.php?tid=40 This router is the same as ZTE Q7 and later I found that both routers are made by the same company:-D This patch adds support for it. Because there is only one port,I disabled VLAN and use eth0 as lan port. I could only create a sysupgrade firmware because I don't know how the orignal webpage check the uploaded image:-( Signed-off-by: 郭传鈜 <gch981213@gmail.com> SVN-Revision: 45208
* ramips: Buffalo WZR-AGL300NH target supportJohn Crispin2015-02-161-0/+1
| | | | | | | | | | | | | I got work with this patch. Ethernet switch (includes VLAN), WiFi connected via PCIe, LEDs, buttons. In mtd partion map of DTS file, I renamed Linux firmware regions (kernel + root squashfs) to “firmware”because it allows kernel to split kernel and roots and rootfsdata. signed-off-by: ngc@ff.iij4u.or.jp —— —— SVN-Revision: 44470
* ramips: add support for Xiaomi MiWiFi Mini devicesJohn Crispin2015-02-022-0/+4
| | | | | | | | | This patch adds support for Xiaomi MiWiFi Mini, a 802.11a/b/g/n/ac dual radio wireless router based on the MediaTek MT7620a SoC. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 44238
* ramips: add support for Tenda 3G150BJohn Crispin2015-01-222-0/+4
| | | | | | | | | | | | | | | Add suport for Tenda 3G150B: - cpu: Ralink RT5350F - flash: 4MB - ram: 32MB - 1x USB 2.0 - 1x RJ45 - one reset button - battery powered (BP-4L, 3.7V 1450mAh) Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 44073
* ralink: add support for firewrtJohn Crispin2015-01-202-0/+4
| | | | | | | | this is a mt7621 based board Signed-off-by: wengbj <linux.c@foxmail.com> SVN-Revision: 44055
* ramips: add preliminary support for DIR-860L B1Felix Fietkau2015-01-172-1/+5
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44016
* ramips: add support for Intenso Memory 2 Move USB 3.0John Crispin2015-01-172-0/+4
| | | | | | | | | | | | | | | | | | | This adds support for a rt5350-based "portable nas" solution from Intenso. The board comes with 32M RAM and 8M Flash, the built-in HDD is connected/accessible via a usb3.0<->sata bridge VLI VL701. The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0 socket (for charging the battery, or accessing the hdd directly). Wireless connectivity is provided by the rt5350 SoC [i.e.: 802.11n 1x1 2.4 GHz with a pcb antenna.] Serial, leds, wifi, ethernet and usb are tested and as far as I can tell: they are working fine (tm). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> SVN-Revision: 44001
* ralink: add support for Kingston MLWG2John Crispin2015-01-172-0/+4
| | | | | | | | | | | | | | This patch adds support for the Kingston Mobilelite Wireless G2 (MLWG2) http://wiki.openwrt.org/toh/kingston/mlwg2 https://github.com/gmacario/kingston-mlwg2-hack/wiki/Testing-OpenWrt-on-MLWG2 Tested-by: Gianpaolo Macario <gmacario@gmail.com> Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 43990
* ramips: add preliminary Archer C20i supportFelix Fietkau2015-01-092-0/+10
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43898
* ramips: Fix HooToo HT-TM02 support.John Crispin2015-01-081-1/+1
| | | | | | | | | | | | | - Fix LED definitions. - Add mode-switch slider definition (at GPIO 14). - Remove unneeded VLAN now that the ethernet driver is fixed and TCP packets get passed correctly now. (This router only has one port.) - Fix LAN port MAC address, which is defined in the factory partition as WLAN MAC address + 1. - Fix board name, as the company name is HooToo and not HOOTOO. - Remove unnecessary packages from the profile. (The end-user is supposed to use mechanisms such as the ImageBuilder in order to add his own set of packages to his own images... while the precompiled images should just contain the core set of packages needed to run the base functions of a wireless router.) Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 43883
* ramips: fix WSR-{600,1166} namesFelix Fietkau2015-01-031-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43817
* ramips: fix wsr-1166 sysupgrade supportFelix Fietkau2015-01-031-1/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43816
* ramips:Add support for Aigale Ai-BR100John Crispin2014-12-132-0/+4
| | | | | | | | | Aigale Ai-BR100 is a router with mt7620a soc. There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led. Signed-off-by: 郭传鈜 <gch981213@gmail.com> SVN-Revision: 43681
* ralink: add support for WSR-600/1166John Crispin2014-11-142-0/+8
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43244
* ralink: fix up dts for mt7621 eval boardJohn Crispin2014-11-121-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43238
* ramips: enable sysupgrade for whr-600d, whr-1166dFelix Fietkau2014-11-081-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43213
* ralink: add support for mt7628John Crispin2014-11-062-2/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43197
* add support for the Linksys E1700Imre Kaloz2014-11-052-0/+4
| | | | SVN-Revision: 43186
* ramips: add support for Airlink101 AR670WJohn Crispin2014-11-032-0/+10
| | | | | | | | | | This is a RT2880-based board, 32MB RAM, 4MB flash. The bootloader is a hacked u-Boot that reads an LZMA image directly, so we skip generating the uImage header and enable the lzma mtdsplit parser. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43153
* ralink: fix switch config on mt7530 evbJohn Crispin2014-10-291-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43105
* ramips: add support for A5-V11 board (resubmit)John Crispin2014-10-292-0/+4
| | | | | | | | | | (Reposted due to an issue with the patchwork server during original submission) Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key) Signed-off-by: Gareth Bryan <gareth@mx9.org> SVN-Revision: 43102
* ramips: add support for Nexx WT3020 devicesJohn Crispin2014-10-202-0/+4
| | | | SVN-Revision: 42983
* ramips: sort boards in upgrade/platform.sh alphabeticallyJohn Crispin2014-10-201-18/+18
| | | | SVN-Revision: 42982
* scripts: fix wrong usage of '==' operatorJohn Crispin2014-10-141-1/+1
| | | | | | | | | | | | | | [base-files] shell-scripting: fix wrong usage of '==' operator normally the '==' is used for invoking a regex parser and is a bashism. all of the fixes just want to compare a string. the used busybox-ash will silently "ignore" this mistake, but make it portable/clean at least. this patch does not change the behavior/logic of the scripts. Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 42911
* ramips: add support for Nexx WT1520John Crispin2014-10-102-0/+4
| | | | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 42867
* ramips: Support for RAMIPS based Tripmate HT-TM02 boardJohn Crispin2014-10-062-0/+4
| | | | | | | | | | | | Provides support for the Tripmate HT-TM02 personal router including LEDs and reset button. “Mode” switch is not supported. New profile includes full set of packages required to enable LEDs, USB, and LUCI. Patches were applied against trunk snapshot r42649. Functionality has been tested in AP, basic wifi client, wifi router, and routed client modes - all good. Signed-off-by: Ron Curry <wingspinner@gmail.com> SVN-Revision: 42785
* ramips: Add support for Omnima MiniPlugJohn Crispin2014-08-182-0/+4
| | | | | | | | This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk> SVN-Revision: 42200
* ramips: add a workaround to fix failsafe on RT5350John Crispin2014-08-181-1/+18
| | | | | | | | | Due to TCP connections not working when VLAN is disabled, this is needed to get failsafe functional. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 42179
* ramips:support Lenovo AC1200 Wireless routerJohn Crispin2014-08-032-1/+9
| | | | | | | | | Lenovo AC1200 series has two types, Y1 and Y1S. Y1S has 256MB DDR2, Y1 only has 128MB and Y1 have no Giga Port. Signed-off-by: Lintel <lintel.huang@gmail.com> SVN-Revision: 41961
* ramips: Add support for VoCoreJohn Crispin2014-08-012-0/+4
| | | | | | | | | This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock. All GPIOs are exported, except spi/i2c. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 41939
* ramips: add support for easyacc wizard8800John Crispin2014-08-011-0/+3
| | | | | | Signed-off-by: Sebastian Wendel <s.wendel@sourceindex.de> SVN-Revision: 41936
* ramips: add support for Kingston MLW221John Crispin2014-07-262-0/+4
| | | | | | | | | | This patch adds support for the Kingston Mobilelite Wireless (MLW-221) http://wiki.openwrt.org/toh/kingston/mlw221 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 41841
* ramips: ethernet mac cleanupJohn Crispin2014-07-261-109/+0
| | | | | | | | | Compile tested all subtargets and profiles. Unfortunately I don't own any board affected by these changes, so no run tests. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41839
* ramips: fix sysupgrade for asiarf awm003John Crispin2014-07-262-0/+4
| | | | | | | | | Since the earlier r41797 change, the board_name for awm003 has been miscalculated, and sysupgrade has been broken. This seems to fix it. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41837
* ramips: soc wmac eeprom cleanupJohn Crispin2014-07-171-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Move eeprom extraction from scripts to dts files. Additionally there are few other changes like: - whitespace fixes - add partition labels where needed - BR6524N board doesn't exist (lost in translation?) - fix Edimax 3g-6200nl model - add wmac eeprom to dts for Asus RT-N14U board Compile tested all subtargets and their profiles. Run tested on: - Asus RT-N15 - Asus RT-N14U - Buffalo WHR-600D - Argus ATP52B - Sparklan WCR-150GN Few problems noted: - many boards didn't have wmac eeprom information defined at all - several boards don't have any patitions defined (see FIXME comments in dts) Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41680
* ramips: basic support for Planex MZK-750DHPJohn Crispin2014-07-141-0/+3
| | | | | | | | some gpios are still missing. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41654
* ramips: add support for WR8305RT boardJohn Crispin2014-07-123-1/+6
| | | | | | | Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41584
* ramips: add support for Zbtlink WA05 routerJohn Crispin2014-07-102-1/+5
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41579
generated by cgit v1.1 at 2025-01-09 21:45:17 +0000