summaryrefslogtreecommitdiff
path: root/target/linux/ramips/base-files
Commit message (Collapse)AuthorAgeFilesLines
* ramips: rt288x: add support for the Belkin F5D8235-4 v1 boardGabor Juhos2011-12-284-0/+9
| | | | | | Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29617
* ramips: rt305x: add support for the ALFA Networks W502U (R36) boardGabor Juhos2011-12-287-2/+21
| | | | SVN-Revision: 29615
* ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N boardGabor Juhos2011-12-275-0/+17
| | | | SVN-Revision: 29612
* ramips: initial support for Sitecom WL-351 v1 002Gabor Juhos2011-12-234-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 29604
* ramips: add support for the Senao/EnGenius ESR-9753 boardGabor Juhos2011-12-236-1/+26
| | | | | | Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29603
* ramips: add support for Omnima MiniEMBWiFi boardGabor Juhos2011-12-145-1/+10
| | | | | | | | | This patch adds support for the Omnima MiniEMBWiFi Ralink RT3050F based board. Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk> SVN-Revision: 29533
* ramips: fix mac addresses on the DIR-300/600 boardsGabor Juhos2011-12-062-0/+13
| | | | SVN-Revision: 29471
* ramips: set mac addresses for the NBG-419NGabor Juhos2011-12-052-1/+7
| | | | | | Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net> SVN-Revision: 29454
* ramips: set preinit interface mac on the hw550-3g boardGabor Juhos2011-12-051-0/+4
| | | | | | Based on a patch by Daniel Golle <dgolle@allnet.de> SVN-Revision: 29453
* ramips: use ramips_get_mac_* functions in the preinit scriptGabor Juhos2011-12-051-18/+4
| | | | SVN-Revision: 29452
* ramips: move ramips_get_mac_* functions to lib/ramips.shGabor Juhos2011-12-052-33/+37
| | | | SVN-Revision: 29451
* ramips: add ramips_ prefix to get_mac_{binary,nvram} functionsGabor Juhos2011-12-051-6/+6
| | | | SVN-Revision: 29450
* ramips: fix network configuration setupGabor Juhos2011-12-051-3/+3
| | | | SVN-Revision: 29448
* ramips: enable sysupgrade on the RT-N15 boardGabor Juhos2011-12-011-0/+1
| | | | SVN-Revision: 29393
* ramips: wrap long line in platform upgrade scriptGabor Juhos2011-12-011-1/+12
| | | | SVN-Revision: 29392
* ramips: setup default network configuration for RT-N15Gabor Juhos2011-12-011-1/+9
| | | | | | Based on a patch by Roman Yeryomin <roman@advem.lv> SVN-Revision: 29390
* ramips: remove default network configuration, and generate that from ↵Gabor Juhos2011-12-011-1/+8
| | | | | | uci-defaults SVN-Revision: 29387
* ramips: use /lib/functions/uci-defaults.shGabor Juhos2011-12-011-26/+12
| | | | SVN-Revision: 29386
* ramips: simplify uci-defaults/network scriptGabor Juhos2011-12-011-50/+13
| | | | SVN-Revision: 29383
* ramips: setup mac and network interfaces from separate functionsGabor Juhos2011-12-011-8/+30
| | | | SVN-Revision: 29382
* ramips: Sparklan wcr-150gn board fixesGabor Juhos2011-12-011-1/+1
| | | | | | | | | | | | * Fix partition sizes. * Add buttons and leds. * Register usb. * Remove unnecessary stuff from image Makefile * Fix rt2x00 eeprom extract. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29380
* ramips: setup bc2 mac addresses from the generic network scriptGabor Juhos2011-12-012-36/+1
| | | | SVN-Revision: 29377
* ramips: combine network setup for all boards in one fileGabor Juhos2011-12-012-39/+116
| | | | | | | | | | | | | Inspired by the patch from Roman Yeryomin. Thanks, Roman! This removes unnecessary duplication and simplifies network setup for new boards. It would be a one line change most likely. [juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards in order to avoid regression] Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 29376
* ramips: Support for NexAira BC2Gabor Juhos2011-10-246-2/+45
| | | | | | | | | The preconfiguration of the USB LED has benn move to the /etc/uci-defaults/leds script. [juhosg] Signed-off-by: Adam Porter <porter.adam at gmail.com> SVN-Revision: 28571
* ramips: combine led setup for all boards in one fileGabor Juhos2011-10-245-85/+34
| | | | | | | | | This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 28569
* ramips: rt305x: add support for the ZyXEL NBG-419N boardGabor Juhos2011-08-224-1/+8
| | | | SVN-Revision: 28078
* ramips: fix wireless firmware extraction for wr512-3gnGabor Juhos2011-08-221-1/+1
| | | | | | Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> SVN-Revision: 28073
* ramips: rt305x: support for wr512-3gn-like routersGabor Juhos2011-08-192-1/+5
| | | | | | Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> SVN-Revision: 28052
* ramips: fix wireless on Belkin F5D8235 v2Gabor Juhos2011-08-191-2/+5
| | | | | | | | Fix wireless firmware extract from flash for Belkin F5D8235 v2. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 28050
* ramips: use maccalc instead of hexdump + sedGabor Juhos2011-08-151-2/+3
| | | | SVN-Revision: 28007
* ramips: rt305x: fix mac addresses on the Netcore NW718 boardGabor Juhos2011-08-152-0/+57
| | | | SVN-Revision: 28006
* ramips: add uci-defaults scripts to preconfigure USB LEDsGabor Juhos2011-08-154-0/+96
| | | | SVN-Revision: 28000
* ramips: load the input drivers during preinitGabor Juhos2011-08-151-0/+12
| | | | SVN-Revision: 27992
* ramips: add support for Argus ATP-52BGabor Juhos2011-08-152-0/+4
| | | | | | | | [The ESW related changes has been removed - juhosg] Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 27991
* ramips: rt305x: add support for the Netcore NW718 boardGabor Juhos2011-07-284-1/+8
| | | | SVN-Revision: 27813
* ramips: rt305x: add support for the Asus RT-G32 B1 boardGabor Juhos2011-07-283-1/+8
| | | | | | Based on a patch by: Sergiy <piratfm@gmail.com> SVN-Revision: 27812
* ramips: rt305x: add support for the DIR-600 B1,B2 boardsGabor Juhos2011-07-284-3/+11
| | | | SVN-Revision: 27808
* ramips: rt305x: change machine id for DIR-300Gabor Juhos2011-07-281-1/+1
| | | | SVN-Revision: 27807
* ramips: rt305x: rename LEDs on the DIR-300-B1Gabor Juhos2011-07-281-1/+1
| | | | SVN-Revision: 27806
* ramips: rt305x: fix uci-defaults/network script for the RT3350 based boardsGabor Juhos2011-07-281-2/+2
| | | | | | | | | | | This change corrects expected CPU name of Ralink RT3050, which describes itself as RT3350 (this name is ripped off chip and elevated to user space via /proc/cpuinfo.) This patch fixes wired network on DIR-300 rev B and DIR-600 rev B Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org> SVN-Revision: 27804
* ramips: add diag support for RT-N15 and PWH2004Gabor Juhos2011-07-061-6/+12
| | | | | | Also sort the board names alphabetically. SVN-Revision: 27478
* ramips: use the 'router' LED for diagnostic on the WHR-G300N boardGabor Juhos2011-07-061-1/+1
| | | | SVN-Revision: 27477
* ramips: add hotplug script to extract eeprom for the rt2x00 driverGabor Juhos2011-07-031-0/+55
| | | | SVN-Revision: 27393
* ramips: add all supported boards to lib/ramips.shGabor Juhos2011-07-031-5/+20
| | | | SVN-Revision: 27389
* ramips: disable watchdog on sysupgradeGabor Juhos2011-07-031-0/+10
| | | | SVN-Revision: 27380
* ramips: initial board support for MOFI3500-3GNGabor Juhos2011-04-043-1/+7
| | | | | | | | | | This patch adds initial board support for the MoFi Network MOFI3500-3GN (Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This router is basically the NA version of the HW550-3G. Signed-off-by: Layne Edwards <ledwards76@gmail.com> SVN-Revision: 26466
* ramips: add sysupgrade and status LED support for HW550-3GGabor Juhos2011-03-272-2/+5
| | | | | | | | | This patch adds sysupgrade and status LED support for the Aztech HW550-3G. Some LED GPIOs were changed for clarity. Signed-off-by: Layne Edwards <ledwards76@gmail.com> SVN-Revision: 26320
* ramips: initial board support for Aztech HW550-3GGabor Juhos2011-03-131-0/+3
| | | | | | | | | | | This patch adds initial support for the Aztech HW550-3G (Ralink RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet. Wireless appears to work fine. USB does not work yet (as with other Ralink boards). Signed-off-by: Layne Edwards <ledwards76@gmail.com> SVN-Revision: 26123
* base-files: use shutdown instead of stop when the system goes down (patch by ↵Felix Fietkau2010-12-131-1/+1
| | | | | | tripolar) SVN-Revision: 24540
* ramips: Added preinit scriptlet to set vars based on cpuinfo during ↵Daniel Dickinson2010-05-301-0/+7
| | | | | | preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ramips.sh was sourced SVN-Revision: 21635
generated by cgit v1.1 at 2024-12-02 16:06:20 +0000