summaryrefslogtreecommitdiff
path: root/target/linux/ramips/base-files
Commit message (Collapse)AuthorAgeFilesLines
* ramips: add support for Tenda 3G150BJohn Crispin2015-01-225-1/+7
| | | | | | | | | | | | | | | Add suport for Tenda 3G150B: - cpu: Ralink RT5350F - flash: 4MB - ram: 32MB - 1x USB 2.0 - 1x RJ45 - one reset button - battery powered (BP-4L, 3.7V 1450mAh) Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 44073
* ralink: add support for firewrtJohn Crispin2015-01-203-0/+5
| | | | | | | | this is a mt7621 based board Signed-off-by: wengbj <linux.c@foxmail.com> SVN-Revision: 44055
* ramips: add preliminary support for DIR-860L B1Felix Fietkau2015-01-174-2/+8
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44016
* ramips: add support for Intenso Memory 2 Move USB 3.0John Crispin2015-01-175-0/+16
| | | | | | | | | | | | | | | | | | | This adds support for a rt5350-based "portable nas" solution from Intenso. The board comes with 32M RAM and 8M Flash, the built-in HDD is connected/accessible via a usb3.0<->sata bridge VLI VL701. The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0 socket (for charging the battery, or accessing the hdd directly). Wireless connectivity is provided by the rt5350 SoC [i.e.: 802.11n 1x1 2.4 GHz with a pcb antenna.] Serial, leds, wifi, ethernet and usb are tested and as far as I can tell: they are working fine (tm). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> SVN-Revision: 44001
* ralink: add support for Kingston MLWG2John Crispin2015-01-175-0/+14
| | | | | | | | | | | | | | This patch adds support for the Kingston Mobilelite Wireless G2 (MLWG2) http://wiki.openwrt.org/toh/kingston/mlwg2 https://github.com/gmacario/kingston-mlwg2-hack/wiki/Testing-OpenWrt-on-MLWG2 Tested-by: Gianpaolo Macario <gmacario@gmail.com> Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 43990
* ramips: fix default led configuration for rt-n14uJohn Crispin2015-01-171-2/+2
| | | | | | | | use new helper function to generate default led configuration Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com> SVN-Revision: 43984
* ramips: add preliminary Archer C20i supportFelix Fietkau2015-01-092-0/+10
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43898
* ramips: Fix HooToo HT-TM02 support.John Crispin2015-01-084-13/+11
| | | | | | | | | | | | | - Fix LED definitions. - Add mode-switch slider definition (at GPIO 14). - Remove unneeded VLAN now that the ethernet driver is fixed and TCP packets get passed correctly now. (This router only has one port.) - Fix LAN port MAC address, which is defined in the factory partition as WLAN MAC address + 1. - Fix board name, as the company name is HooToo and not HOOTOO. - Remove unnecessary packages from the profile. (The end-user is supposed to use mechanisms such as the ImageBuilder in order to add his own set of packages to his own images... while the precompiled images should just contain the core set of packages needed to run the base functions of a wireless router.) Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 43883
* ramips: update BR-6475ND dtsJohn Crispin2015-01-081-1/+1
| | | | | | | | Update firmware location for 2.4GHz radio on the Edimax BR-6475nD. Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org> SVN-Revision: 43881
* ramips: base-files: Whitespace fixes.John Crispin2015-01-082-6/+6
| | | | | | Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 43880
* ramips: fix WSR-{600,1166} namesFelix Fietkau2015-01-031-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43817
* ramips: fix wsr-1166 sysupgrade supportFelix Fietkau2015-01-031-1/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43816
* add "preinit_regular" diag.sh set_state argumentJohn Crispin2014-12-151-0/+3
| | | | | | | | | | | | This new argument is used right after starting regular preinit (which happens if failsafe wasn't triggered). The main purpose of "preinit" argument is to indicate that failsafe can be triggered, however we were missing a way to inform user that we don't wait for a trigger anymore. With this change it's clear when failsafe mode can be triggered. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43715
* ramips:Add support for Aigale Ai-BR100John Crispin2014-12-135-0/+12
| | | | | | | | | Aigale Ai-BR100 is a router with mt7620a soc. There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led. Signed-off-by: 郭传鈜 <gch981213@gmail.com> SVN-Revision: 43681
* ralink: fix lenovo y1 wan port mappingJohn Crispin2014-12-121-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43667
* ramips: fix default config breakage on whr-1166dFelix Fietkau2014-11-161-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43281
* ralink: add support for WSR-600/1166John Crispin2014-11-144-1/+16
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43244
* ralink: fix up dts for mt7621 eval boardJohn Crispin2014-11-122-0/+4
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43238
* ramips: enable sysupgrade for whr-600d, whr-1166dFelix Fietkau2014-11-081-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43213
* ralink: add support for mt7628John Crispin2014-11-063-2/+6
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43197
* add support for the Linksys E1700Imre Kaloz2014-11-054-0/+12
| | | | SVN-Revision: 43186
* ralink: fix wan port on whr-1166John Crispin2014-11-031-1/+6
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43171
* ramips: add support for Airlink101 AR670WJohn Crispin2014-11-035-3/+16
| | | | | | | | | | This is a RT2880-based board, 32MB RAM, 4MB flash. The bootloader is a hacked u-Boot that reads an LZMA image directly, so we skip generating the uImage header and enable the lzma mtdsplit parser. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43153
* ralink: load mt7530 driver on the 3 buffalo unitsJohn Crispin2014-10-301-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43119
* ralink: fix switch config on mt7530 evbJohn Crispin2014-10-292-0/+10
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43105
* ramips: add support for A5-V11 board (resubmit)John Crispin2014-10-294-0/+14
| | | | | | | | | | (Reposted due to an issue with the patchwork server during original submission) Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key) Signed-off-by: Gareth Bryan <gareth@mx9.org> SVN-Revision: 43102
* ramips: add support for Nexx WT3020 devicesJohn Crispin2014-10-205-0/+11
| | | | SVN-Revision: 42983
* ramips: sort boards in upgrade/platform.sh alphabeticallyJohn Crispin2014-10-201-18/+18
| | | | SVN-Revision: 42982
* scripts: fix wrong usage of '==' operatorJohn Crispin2014-10-142-2/+2
| | | | | | | | | | | | | | [base-files] shell-scripting: fix wrong usage of '==' operator normally the '==' is used for invoking a regex parser and is a bashism. all of the fixes just want to compare a string. the used busybox-ash will silently "ignore" this mistake, but make it portable/clean at least. this patch does not change the behavior/logic of the scripts. Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 42911
* ramips: add support for Nexx WT1520John Crispin2014-10-105-1/+12
| | | | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 42867
* ramips: D-Link DIR-810L: make led naming consistent with other boardsJohn Crispin2014-10-061-1/+1
| | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 42789
* ramips: Support for RAMIPS based Tripmate HT-TM02 boardJohn Crispin2014-10-065-0/+18
| | | | | | | | | | | | Provides support for the Tripmate HT-TM02 personal router including LEDs and reset button. “Mode” switch is not supported. New profile includes full set of packages required to enable LEDs, USB, and LUCI. Patches were applied against trunk snapshot r42649. Functionality has been tested in AP, basic wifi client, wifi router, and routed client modes - all good. Signed-off-by: Ron Curry <wingspinner@gmail.com> SVN-Revision: 42785
* ramips: D-Link DIR-810L. Add support for SoC 2.4 GHz wireless and fix leds ↵John Crispin2014-09-191-1/+1
| | | | | | naming SVN-Revision: 42619
* ramips: add omni plug ledsJohn Crispin2014-08-181-0/+4
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42201
* ramips: Add support for Omnima MiniPlugJohn Crispin2014-08-182-0/+4
| | | | | | | | This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk> SVN-Revision: 42200
* ramips: fix switch config for Edimax 3G-6200nJohn Crispin2014-08-181-1/+1
| | | | | | | | Switch in Edimax 3G-6200n also require full switch reset, not only vlan definitions. Tested on Edimax 3G-6200n. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42194
* ramips: Hame: change LED name mpr-x -> hameJohn Crispin2014-08-182-4/+4
| | | | | | Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42190
* ramips: make use of the new board detection layerJohn Crispin2014-08-182-13/+11
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42186
* ramips: add a workaround to fix failsafe on RT5350John Crispin2014-08-181-1/+18
| | | | | | | | | Due to TCP connections not working when VLAN is disabled, this is needed to get failsafe functional. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 42179
* ramips:support Lenovo AC1200 Wireless routerJohn Crispin2014-08-035-2/+29
| | | | | | | | | Lenovo AC1200 series has two types, Y1 and Y1S. Y1S has 256MB DDR2, Y1 only has 128MB and Y1 have no Giga Port. Signed-off-by: Lintel <lintel.huang@gmail.com> SVN-Revision: 41961
* ramips: Add support for VoCoreJohn Crispin2014-08-015-0/+17
| | | | | | | | | This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock. All GPIOs are exported, except spi/i2c. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 41939
* ramips: add support for easyacc wizard8800John Crispin2014-08-012-0/+4
| | | | | | Signed-off-by: Sebastian Wendel <s.wendel@sourceindex.de> SVN-Revision: 41936
* ramips: Fix LEDs on the Kingston MLW221John Crispin2014-08-012-1/+2
| | | | | | | | | | LED Fix up for the Kingston Mobilelite Wireless (MLW-221) http://wiki.openwrt.org/toh/kingston/mlw221 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 41933
* ramips: add support for Kingston MLW221John Crispin2014-07-265-0/+14
| | | | | | | | | | This patch adds support for the Kingston Mobilelite Wireless (MLW-221) http://wiki.openwrt.org/toh/kingston/mlw221 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 41841
* ramips: ethernet mac cleanupJohn Crispin2014-07-262-123/+22
| | | | | | | | | Compile tested all subtargets and profiles. Unfortunately I don't own any board affected by these changes, so no run tests. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41839
* ramips: fix vlan configuration for asiarf avm003John Crispin2014-07-261-0/+1
| | | | | | | | | The earlier r41797 change was missing this part, to enable the right vlan configuration. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41838
* ramips: fix sysupgrade for asiarf awm003John Crispin2014-07-262-0/+4
| | | | | | | | | Since the earlier r41797 change, the board_name for awm003 has been miscalculated, and sysupgrade has been broken. This seems to fix it. Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41837
* ramips: fix missing inclusion of system.sh for mtd_get_mac_binary and friends.John Crispin2014-07-231-0/+1
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 41810
* ramips: soc wmac eeprom cleanupJohn Crispin2014-07-172-108/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Move eeprom extraction from scripts to dts files. Additionally there are few other changes like: - whitespace fixes - add partition labels where needed - BR6524N board doesn't exist (lost in translation?) - fix Edimax 3g-6200nl model - add wmac eeprom to dts for Asus RT-N14U board Compile tested all subtargets and their profiles. Run tested on: - Asus RT-N15 - Asus RT-N14U - Buffalo WHR-600D - Argus ATP52B - Sparklan WCR-150GN Few problems noted: - many boards didn't have wmac eeprom information defined at all - several boards don't have any patitions defined (see FIXME comments in dts) Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41680
* ramips: basic support for Planex MZK-750DHPJohn Crispin2014-07-143-1/+6
| | | | | | | | some gpios are still missing. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41654
generated by cgit v1.1 at 2024-11-06 11:16:36 +0000