summaryrefslogtreecommitdiff
path: root/target/linux/ramips/files
Commit message (Expand)AuthorAgeFilesLines
* ramips: initial support for Sitecom WL-351 v1 002Gabor Juhos2011-12-237-4/+187
* ramips: add support for the Senao/EnGenius ESR-9753 boardGabor Juhos2011-12-235-0/+142
* ramips: define firmware partition for Omnima MiniEMBWiFiGabor Juhos2011-12-231-0/+4
* ramips: add support for Omnima MiniEMBWiFi boardGabor Juhos2011-12-144-0/+118
* ramips: fix argus board rootfs sizeGabor Juhos2011-12-041-1/+1
* ramips: fix Asus RT-N15 board supportGabor Juhos2011-12-011-3/+3
* ramips: Sparklan wcr-150gn board fixesGabor Juhos2011-12-011-2/+52
* ramips: Support for NexAira BC2Gabor Juhos2011-10-244-0/+119
* ramips: fix switch-port assignment for HW550-3GGabor Juhos2011-10-241-1/+1
* ramips: rt305x: add support for the ZyXEL NBG-419N boardGabor Juhos2011-08-224-0/+118
* ramips: rt305x: remove unused defines from mach-nw718.cGabor Juhos2011-08-221-3/+0
* ramips: sort Makefile entriesGabor Juhos2011-08-221-1/+1
* ramips: sort RAMIPS_MACH_* definesGabor Juhos2011-08-221-4/+4
* ramips: remove 'default [yn]' keywords from machine Kconfig entriesGabor Juhos2011-08-192-16/+2
* ramips: rt305x: support for wr512-3gn-like routersGabor Juhos2011-08-194-0/+161
* ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routersGabor Juhos2011-08-192-0/+2
* ramips: rt305x: make config and factory partitions read-only on the ATP-52BGabor Juhos2011-08-151-0/+2
* ramips: rt305x: add dwc_otg driverGabor Juhos2011-08-1520-0/+24343
* ramips: rt305x: register the dwc_otg device on the relevant boardsGabor Juhos2011-08-155-0/+5
* ramips: rt305x: add dwc_otg platform deviceGabor Juhos2011-08-152-0/+27
* ramips: add support for Argus ATP-52BGabor Juhos2011-08-154-0/+122
* ramips: allow to specify port layout for the switch of the RT305x/RT3350Gabor Juhos2011-08-1513-13/+62
* ramips: rt305x: add support for the Netcore NW718 boardGabor Juhos2011-07-284-0/+151
* ramips: rt305x: add support for the Asus RT-G32 B1 boardGabor Juhos2011-07-284-0/+122
* ramips: rt305x: introduce rt305x_register_spi helperGabor Juhos2011-07-282-0/+24
* ramips: add SPI controller driverGabor Juhos2011-07-282-0/+559
* ramips: rt305x: add support for the DIR-600 B1,B2 boardsGabor Juhos2011-07-282-0/+8
* ramips: rt305x: change machine id for DIR-300Gabor Juhos2011-07-282-2/+2
* ramips: rt305x: rename LEDs on the DIR-300-B1Gabor Juhos2011-07-281-3/+3
* ramips: rt305x: sort Kconfig/Makefile entriesGabor Juhos2011-07-282-19/+19
* rtl8366: unify rtl8366s and rtl8366rb platform dataFelix Fietkau2011-07-242-4/+4
* ramips: merge 2.6.39 patchesGabor Juhos2011-07-031-10/+11
* ramips: specify eeprom file name on RT305XGabor Juhos2011-07-031-1/+4
* ramips: specify eeprom file name on RT288XGabor Juhos2011-07-031-1/+4
* ramips: use lowercase partiion names on the WCR150GN boardGabor Juhos2011-07-031-4/+4
* ramips: update partition map for DIR-300-B1Gabor Juhos2011-07-031-4/+4
* ramips: consistently use 'firmware' name for sysupgrade partitionsGabor Juhos2011-07-036-6/+6
* ramips: fix a section mismatch warningGabor Juhos2011-07-031-1/+1
* ramips: remove unused include from the common GPIO codeGabor Juhos2011-07-031-1/+0
* ramips: update HW550-3G mtd partitionsGabor Juhos2011-07-031-8/+4
* ramips: set cp0_perfcount_irq for RT305XGabor Juhos2011-07-031-0/+5
* ramips: initial board support for MOFI3500-3GNGabor Juhos2011-04-044-0/+149
* ramips: UPF_FIXED_TYPE must be set for the serial portsGabor Juhos2011-03-271-1/+1
* ramips: define GPIO chips separately for each SoCsGabor Juhos2011-03-277-84/+152
* ramips: move GPIO definitions into a separate header fileGabor Juhos2011-03-275-63/+52
* ramips: setup GPIO chip functions on the flyGabor Juhos2011-03-271-12/+5
* ramips: use separate register base for GPIO chipsGabor Juhos2011-03-271-8/+16
* ramips: fix dir-300 mtd layoutGabor Juhos2011-03-271-1/+1
* ramips: enable MDIO on the HW550-3G boardGabor Juhos2011-03-271-1/+5
* ramips: add sysupgrade and status LED support for HW550-3GGabor Juhos2011-03-271-10/+10