summaryrefslogtreecommitdiff
path: root/target/linux/ramips/image
Commit message (Collapse)AuthorAgeFilesLines
* ramips: Add support for Phicomm K2 PSG1218Xuefu Lin2016-10-041-0/+7
| | | | | | | | | - CPU: MT7620A 580MHz - Flash: 8MB - RAM: 64MB - External PA+LNA on both WLAN2.4 and WLAN5 - 4x LAN ethernet and 1x WAN ethernet Signed-off-by: Xuefu Lin <xuefulin@gmail.com>
* ramips : add support for Newifi D1BangLang Huang2016-09-271-0/+8
| | | | Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
* ramips : add support for PandoraBox D1BangLang Huang2016-09-271-0/+8
| | | | Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
* ramips: Add support for ZBT-CPE102Cezary Jackiewicz2016-09-271-0/+7
| | | | | | | | | | - CPU: MT7620N 580MHz - Flash: 8MB - RAM: 64MB - build-in minipcie slot for modem 3G/4G - one ethernet port 10/100Mbps Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* ramips: fix DEVICE_PACKAGES of Ubiquiti EdgeRouter XMatthias Schiffer2016-09-261-1/+1
| | | | | | | kmod-rt2x00-lib and kmod-mac80211 need to be removed, as they depend on kmod-cfg80211. kmod-rt2800-pci should not be installed anyways. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ramips: fix wrong blocksizesMathias Kresin2016-09-152-2/+2
| | | | | | | | | | | | | | | | | | The D-Link DIR-860L B1 has a flash chip which doesn't support 4K sectors. Since the DIR-860L B1 was the only mt7621 board which had the 4k blocksize set, the 4K sector support is removed from the kernel config. I've checked the flash chips of all boards having set a 4K blocksize again. This time I searched harder to finding bootlogs instead of relying on wikis articles and/or the device tree source file. The Planex MZK-DP150N has an en25q32b instead of the mentioned one in the dts. Albeit the en25q32b supports 4K sectors, 4K support is not enabled in the driver. Change the blocksize for this board back to 64K. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Mathias Kresin <dev@kresin.me>
* image: add KERNEL_SIZE to the default device varsMathias Kresin2016-09-131-1/+1
| | | | | This reverts commit ec37a565878fd79d4127cbb843c17ce3b8dc97c0 and fixes the underlying issue.
* build: drop UBI EOF marker from images by defaultFelix Fietkau2016-09-121-0/+1
| | | | | | | | Only add them where they are actually required. Should help with compatibility issues with stock U-Boot images that access UBI Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: set blocksize for remaining rt3883 devicesMathias Kresin2016-09-081-0/+4
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: remove old build code seama recipeMathias Kresin2016-09-031-32/+0
| | | | | | | Now that all seama images are using the new build code this seama recipe used with the old build code can be dropped. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: switch DIR-610 A1 to new image build codeMathias Kresin2016-09-081-3/+17
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: switch some rt3883 devices to new build codeMathias Kresin2016-09-031-25/+52
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: move seama build recipe to MakefileMathias Kresin2016-09-033-18/+9
| | | | | | | The identical build step is defined twice. Move it to the parent Makefile to use only one version. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: switch DIR-615 H1 to new image build codeMathias Kresin2016-09-021-11/+8
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add build recipe for senao headerMathias Kresin2016-08-171-0/+5
| | | | | | | Add it to the Makefile to allow a board which will be supported soon to use the recipe as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: set blocksize for 4MB devicesMathias Kresin2016-09-035-4/+39
| | | | | | | | | | | | | | | | | | | | | | | | Set the blocksize for devices having only 4MB of flash for ramips devices already using the new image build code. Informations about the used flash chip are gathered from the OpenWrt wiki, wikidevi, forums, OEM bootlogs or the compatible property in the device tree source file. The en25q32b from the AirLive Air3GII does not have 4k support in the kernel. For the following boards no information about the used flash chip could be found and a 64k blocksize is assumed: - Ralink V11ST-FE - Ralink AP-RT3052-V22RW-2X2 - MediaTek MT7628 EVB - MediaTek MT7621 EVB - UPVEL UR-326N4G - Buffalo WZR-AGL300NH Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: don't set the same max image size twiceMathias Kresin2016-09-043-50/+0
| | | | | | The ralink_default_fw_size_8M is already set for the default device. Signed-off-by: Mathias Kresin <dev@kresin.me>
* image: specify max image size in Kilobyte/MegabyteMathias Kresin2016-09-044-41/+22
| | | | | | Use the k and m unit suffix to be consistent with the blocksize. Signed-off-by: Mathias Kresin <dev@kresin.me>
* image: use k as unit suffix for blocksizeMathias Kresin2016-09-041-2/+2
| | | | | | | Use k as unit suffix for kilobyte to have a the same unit regardless of the used filesystem. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use lower case names for TEW-69xGR imagesMathias Kresin2016-09-091-4/+4
| | | | | | | Use lower case variant of the device name for to images to be consistent with all other images names. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix wrong TARGET_DEVICESMathias Kresin2016-09-081-1/+1
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix wrong device titleMathias Kresin2016-09-081-1/+1
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for Mercury MAC1200R v2Daniel Golle2016-09-091-0/+7
| | | | | | | | MT7628AN + MT7612E, 8MB SPI flash, 64MB DDR RAM reset button GPIO is still missing (anyone?) bootloader password is 'slp' Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: fix legacy initramfs imagesFelix Fietkau2016-09-031-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix build of TRENDnet TEW-69xGR imagesMathias Kresin2016-08-201-16/+20
| | | | | | | The image generation for TEW-691GR and TEW-692GR was broken since 79d02229 due to the move of the UMedia recipe to another Makefile. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: move umedia build step to MakefileMathias Kresin2016-08-202-4/+4
| | | | | | Some rt3883 based boards need this one as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix legacy image buildFelix Fietkau2016-08-111-4/+7
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: Add support for Thunder TimecloudChuanhong Guo2016-08-101-0/+7
| | | | | | | Thunder Timecloud is a small NAS with MT7621A. It has 1 USB port and an SD Card slot. There is no wireless cards. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: Add support for TEW-714TRUJimmy Zhong2016-08-101-0/+6
| | | | Signed-off-by: Jimmy Zhong <mb300sd@mb300sd.net>
* ramips: updated remaining profiles to the new image building codeJohn Crispin2016-08-034-392/+1001
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* image: add a helper variable for getting kernel/rootfs from within image ↵Felix Fietkau2016-07-311-2/+2
| | | | | | Build/* templates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: rename sysupgrade-nand to sysupgrade-tarJo-Philipp Wich2016-07-291-1/+1
| | | | | | | Now that the "sysupgrade-nand" step is used by non-NAND targets as well, rename it to "sysupgrade-tar" to make it more generic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: Add support for D-Link DCH-M225Michael Lee2016-07-111-0/+28
| | | | | | | | D-Link DCH-M225 is based on Mediatek MT7620 with 64MB ram, 8MB flash, 3.5mm audio out support. but no ethernet and usb ports. so you must default enable wifi. Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: Add support for the NixCore X1 ModuleL. D. Pinney2016-07-111-0/+13
| | | | | | | | | The NixCore X1 is a Ralink/MediaTek rt5350 WiFi Module. http://nixcores.com/ Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: Drew Gaylo <drew@nixcores.com>
* ramips: fix build error in ubnt-erx initramfs factory imageFelix Fietkau2016-07-062-4/+5
| | | | | | | Build initramfs kernel image, but skip factory image if initramfs size is too big. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix up switch settings for Sitecom WL-351 v1 002John Crispin2016-07-031-1/+0
| | | | | | | | | Pinmux for rgmii needs to be set to rgmii, not gpio. Hide the ESW switch on boot (using new rgmii esw devicetree attribute). Also add a Sitecom-specific profile, since the image needs to include the rtl8366 kernel driver. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
* ramips: add suport for ZBT APE522IIRoger Pueyo Centelles2016-06-221-0/+8
| | | | | | | | | The ZBT APE522II is a dual-radio outdoor CPE based on the MT7620a SoC. It has 64 MB RAM, 8 MB flash, 2 Fast Ethernet ports via internal switch (one with 802.3af 48V PoE support), a 802.11b/g/n SoC 2.4 GHz radio and an 802.11a/n/ac MT7612E-based 5 GHz radio. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ramips/image: Add Archer C50 to mt7620 MakefileHenryk Heisig2016-06-131-0/+9
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips: add support for DuZun DM06Michael Lee2016-06-131-0/+8
| | | | | | | | DuZun DM06 is a develop board based on mt7628 64M RAM, 8M SPI Flash, 1 WAN, 1 LAN. wm8960 codec with line out, line in and speaker output. Signed-off-by: Michael Lee <igvtee@gmail.com>
* ramips: fix Netgear EX2700 imagesJoseph C. Lehner2016-06-051-3/+3
| | | | | | | Calling `cat foo bar | dd ... conv=sync` *may* add extraneous padding. Avoid this. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* ramips: rebrand Netgear EX2700 fakeroot uImageJoseph C. Lehner2016-06-051-0/+0
| | | | | | Change image name: "OpenWrt fakeroot" -> "LEDE fakeroot" Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* ramips: add Widora-NEO board supportYuan Chenmang2016-06-011-0/+8
| | | | | | | | | The Widora board is similar to the Linkit 7688 but features a larger flash capacity. Signed-off-by: Yuan Chenmang <771992497@qq.com> [Jo-Philipp Wich: Reword commit message, cleanup initial PR] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix Netgear EX2700 imagesJoseph C. Lehner2016-05-301-2/+3
| | | | | | | | The previous image creation code would have failed if the unpadded kernel uImage size was less than 64 bytes from the next erase block boundary. Fix that. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* ramips: fix Netgear EX2700 imagesJoseph C. Lehner2016-05-271-8/+4
| | | | | | | | The bootloader on this device expects the kernel partition to end on a 64k boundary. The last 64 byte of the kernel partition must contain a valid uImage header (the fakeroot partition). Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* ramips: fix 8M WT3020 image creationJohn Crispin2016-05-161-1/+1
| | | | | | fix image size for 8M version : 4M -> 8M Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
* ramips: fix ArcherC20i image creation - 3rd tryJohn Crispin2016-05-151-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix Archer C20i image buildFelix Fietkau2016-05-151-2/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: fix ArcherC20i image creationJohn Crispin2016-05-141-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix indentation of Build/* template commandsFelix Fietkau2016-05-122-12/+12
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: convert mt7620 to new image building codeJohn Crispin2016-05-121-160/+381
| | | | Signed-off-by: John Crispin <john@phrozen.org>
generated by cgit v1.1 at 2024-11-08 06:14:35 +0000