summaryrefslogtreecommitdiff
path: root/target/linux/ramips/rt305x
Commit message (Collapse)AuthorAgeFilesLines
* ralink: fix the config filesJohn Crispin2015-02-142-0/+170
| | | | | | | | oops, accidently moved instead of copied them Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44454
* ralink: add 3.18 supportJohn Crispin2015-02-091-12/+16
| | | | | | | | keep default as 3.14, mt7621 gic need to be ported to 3.18 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44349
* ramips: add support for Tenda 3G150BJohn Crispin2015-01-221-0/+13
| | | | | | | | | | | | | | | Add suport for Tenda 3G150B: - cpu: Ralink RT5350F - flash: 4MB - ram: 32MB - 1x USB 2.0 - 1x RJ45 - one reset button - battery powered (BP-4L, 3.7V 1450mAh) Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 44073
* ramips: improve and fix Memory 2 Move supportJohn Crispin2015-01-222-2/+2
| | | | | | | | | | | | | | | | | This patch is a follow up for my previous patch: "ramips: add support for Intenso Memory 2 Move USB 3.0". It fixes a couple of errors in the DTS (one of which broke the gpio-buttons). The kmod-leds-gpio dependency has been dropped as it is already part of the ramips target. Furthermore the ramdisk/uImage image is generated by default for the rt3050 subtarget. This image is needed to flash OpenWrt for the first time onto the device via TFTP. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> SVN-Revision: 44072
* ramips: add support for Intenso Memory 2 Move USB 3.0John Crispin2015-01-171-0/+20
| | | | | | | | | | | | | | | | | | | This adds support for a rt5350-based "portable nas" solution from Intenso. The board comes with 32M RAM and 8M Flash, the built-in HDD is connected/accessible via a usb3.0<->sata bridge VLI VL701. The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0 socket (for charging the battery, or accessing the hdd directly). Wireless connectivity is provided by the rt5350 SoC [i.e.: 802.11n 1x1 2.4 GHz with a pcb antenna.] Serial, leds, wifi, ethernet and usb are tested and as far as I can tell: they are working fine (tm). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> SVN-Revision: 44001
* ramips: Fix HooToo HT-TM02 support.John Crispin2015-01-081-14/+4
| | | | | | | | | | | | | - Fix LED definitions. - Add mode-switch slider definition (at GPIO 14). - Remove unneeded VLAN now that the ethernet driver is fixed and TCP packets get passed correctly now. (This router only has one port.) - Fix LAN port MAC address, which is defined in the factory partition as WLAN MAC address + 1. - Fix board name, as the company name is HooToo and not HOOTOO. - Remove unnecessary packages from the profile. (The end-user is supposed to use mechanisms such as the ImageBuilder in order to add his own set of packages to his own images... while the precompiled images should just contain the core set of packages needed to run the base functions of a wireless router.) Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 43883
* all targets: remove all =m kernel config symbolsFelix Fietkau2015-01-051-4/+0
| | | | | | | | | | | | modules build during the kernel compile phase are ignored anyway, all modules should be built using KernelPackage in package/kernel/linux/modules/* selecting the appropriate config symbols there rather than in target/linux/*/config-* Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43842
* ramips: use CONFIG_MTD_SPLIT_UIMAGE_FW instead of CONFIG_MTD_UIMAGE_SPLITFelix Fietkau2015-01-021-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43813
* ramips: split mt7621 spi into a separate driver, increase maximum transfer sizeFelix Fietkau2015-01-021-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43807
* ralink: DCS-930: enable soundLuka Perkov2014-11-111-0/+1
| | | | | | | | Camera has microphone; in order to use it by default enable sound support. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 43232
* ramips: add support for A5-V11 board (resubmit)John Crispin2014-10-291-0/+18
| | | | | | | | | | (Reposted due to an issue with the patchwork server during original submission) Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key) Signed-off-by: Gareth Bryan <gareth@mx9.org> SVN-Revision: 43102
* ramips: add support for Nexx WT1520John Crispin2014-10-101-0/+17
| | | | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 42867
* ramips: Support for RAMIPS based Tripmate HT-TM02 boardJohn Crispin2014-10-061-0/+28
| | | | | | | | | | | | Provides support for the Tripmate HT-TM02 personal router including LEDs and reset button. “Mode” switch is not supported. New profile includes full set of packages required to enable LEDs, USB, and LUCI. Patches were applied against trunk snapshot r42649. Functionality has been tested in AP, basic wifi client, wifi router, and routed client modes - all good. Signed-off-by: Ron Curry <wingspinner@gmail.com> SVN-Revision: 42785
* ralink: drop 3.10 supportJohn Crispin2014-09-121-169/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42481
* ralink: dwc_otg->dwc2John Crispin2014-09-0815-19/+19
| | | | | | | | | | the old dwc_otg driver is starting to fall apart and fails on newer 3g modems and some storage devices. switch to the upstream dwc2 driver which is no longer in staging/. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42446
* ramips: enable second SPI for VoCoreJohn Crispin2014-08-251-1/+2
| | | | | | | | This patch enables the second SPI as spidev and also fixes some typos. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 42277
* ralink: clean up HAME profiles, remove unnecessary packages.John Crispin2014-08-181-4/+2
| | | | | | Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 42192
* ralink: add 3.14 supportJohn Crispin2014-08-071-0/+171
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42040
* ramips: add profile for easyacc wizard8800John Crispin2014-08-031-0/+21
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41986
* ramips: Add support for VoCoreJohn Crispin2014-08-011-0/+19
| | | | | | | | | This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock. All GPIOs are exported, except spi/i2c. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 41939
* ramips: add a profile for AWM003John Crispin2014-07-221-1/+12
| | | | | | | | same as AWM002 but with 64mb RAM Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41797
* target/linux/*: more dead package cleanupsJohn Crispin2014-07-101-1/+1
| | | | | | | | found 2 more Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41574
* target/linux/*: more dead package cleanupsJohn Crispin2014-07-104-5/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41571
* ralink: wpa does not exist, use wpad-mini insteadJohn Crispin2014-07-101-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41561
* ralink: add Wansview NCS601W IP CameraJohn Crispin2014-07-021-0/+18
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41453
* ramips: cleanup some rt305x profilesJohn Crispin2014-06-193-21/+14
| | | | | | | | | | move both asus boards to asus.mk rename HW5503G profile to HW550-3G to match name in image/Makefile (fixes #16599) Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 41271
* ramips: restore AWM002-EVB profile in asiarf.mkJohn Crispin2014-06-161-2/+13
| | | | | | | | | | | | In a recent revision (r41177) John Crispin removed the profile for the AsiaRF AWM002 eval board while adding another AsiaRF board. This patch restores AWM002 and also corrects a misspelling and an apparently errant reference to an Allnet ALL0239-3G device. Signed-off-by: Galen Seitz <galens@seitzassoc.com> Signed-off-by: Russell Senior <russell@personaltelco.net> SVN-Revision: 41215
* ramips: add asiarf awapn2403 supportJohn Crispin2014-06-131-8/+6
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41177
* ramips: fix rt2x00 handling of default packages for subtargetsFelix Fietkau2014-06-111-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41145
* ramips: add missing profile for DIR-615-DJohn Crispin2014-06-021-0/+13
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 40911
* ralink: Enable Asus RT-N10+ in menuconfig targetsJohn Crispin2014-06-021-0/+17
| | | | | | | This patch adds "Asus RT-N10+" as a target option in menuconfig. The device has been supported for a while but is currently missing a profile (.mk). Signed-off-by: Randolph Kuntz <8D961920@galaxymail.org> SVN-Revision: 40903
* ramips: Add support for the 7Links PX-4885 wireless router.John Crispin2014-04-221-0/+20
| | | | | | | | | | | | | The 7Links PX-4885 is a small battery-powered wireless router. It is based on a RT5350F WiSoC and features one ethernet port and one USB port. It is a Hame MPR-A1 clone, except it has different GPIOs, a different battery and more RAM (32 MB). This patch adds a profile for this board, the corresponding device tree file and the adequate base-files changes (incl. sysupgrade). Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org> SVN-Revision: 40554
* ralink: add HLK-RM04 supportJohn Crispin2014-01-121-0/+17
| | | | | | | | https://github.com/JiapengLi/OpenWrt-HiLink-HLK-RM04 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39237
* ralink: add mt7621 supportJohn Crispin2013-12-131-0/+1
| | | | | | | | there are still various missing pieces for full support. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 39040
* ralink: fix asiarf image generationJohn Crispin2013-10-071-3/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38324
* ralink: make cevt systick selectable via kconfigJohn Crispin2013-10-071-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38319
* build: unify mips target cflagsFelix Fietkau2013-09-261-1/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38210
* ramips: sync 3.10 configsGabor Juhos2013-09-251-1/+3
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38181
* ralink: add support for dalink dcs930l ipcamJohn Crispin2013-09-191-0/+12
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38053
* ralink: add pinctrl driverJohn Crispin2013-09-171-2/+6
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38026
* kernel/3.10: add new Kconfig option for firmware partition splitGabor Juhos2013-09-151-0/+1
| | | | | | | | | | | | | | Add a new kernel config option for generic firmware partition split support and change the uImage split support to depend on the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to MTD_SPLIT_FIRMWARE_NAME to make it more generic. The patch is in preparation for multiple firmware format support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38002
* ramips: DIR-610-A1 SupportJohn Crispin2013-08-141-0/+10
| | | | | | | | http://patchwork.openwrt.org/patch/3933/ Signed-off-by: Flavio Silveira <fggs@terra.com.br> SVN-Revision: 37785
* ramips: update v3.10 patchesJohn Crispin2013-08-142-159/+1
| | | | | | | | Sync the patches with those sent upstream for v3.12. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37778
* ramips: add Poray IP2202 supportJohn Crispin2013-08-011-0/+12
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37640
* ramips: add Poray X8 supportJohn Crispin2013-08-011-0/+10
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37639
* ramips: add Poray X5/X6 SupportJohn Crispin2013-08-011-0/+10
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37638
* ramips: add Poray M4 4M/8M supportJohn Crispin2013-08-011-0/+10
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37637
* ramips: add Poray M3 supportJohn Crispin2013-08-011-0/+10
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37636
* ramips: add basics for Poray devicesJohn Crispin2013-08-011-0/+7
| | | | | | | | | | | | | | | | This commit adds the basic elements to support Poray brand routers. It contains a tool to do the encryption/obfuscation that is used in Poray routers. Support for Poray devices was worked on by: Felix Kaechele <heffer@fedoraproject.org> Luis Soltero <lsoltero@globalmarinenet.com> Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37635
* ramips: add MPR-A1 supportJohn Crispin2013-07-271-0/+12
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37568
generated by cgit v1.1 at 2024-11-06 01:26:08 +0000