summaryrefslogtreecommitdiff
path: root/target/linux/ramips
Commit message (Expand)AuthorAgeFilesLines
* ramips: gpio-mt7621 was not handling irqs above 31 properlyJohn Crispin2015-10-201-1/+1
* ramips: add alsa supportJohn Crispin2015-10-195-1/+8554
* ramips: add a baurate hackJohn Crispin2015-10-191-0/+12
* ramips: add LinkIt Smart7688 supportJohn Crispin2015-10-198-0/+311
* ramips: fix /target/linux/ramips/dts/HC5XXX.dtsiJohn Crispin2015-10-071-2/+0
* ramips: enable mt76 by default for the mt7620 subtarget (for devices with mt7...Felix Fietkau2015-10-062-3/+2
* ramips: improve read performance of the m25p80 chunked io patchFelix Fietkau2015-10-051-7/+58
* ramips: improve systick timerJohn Crispin2015-10-051-6/+145
* ramips: fix use remove_irq to release irqaction resourceJohn Crispin2015-10-051-1/+1
* ramips: add support for 16MB VoCoreJohn Crispin2015-10-054-35/+93
* ramips: fix size-cells for spi nodesJohn Crispin2015-10-056-6/+6
* ramips: Ralink RT3883 RGMII pinmux fix.John Crispin2015-10-051-2/+2
* ramips: Enable rx of 1536 bytes ethernet frames on MT7621John Crispin2015-10-051-4/+4
* ramips: Fix too small rx bufferJohn Crispin2015-10-051-4/+12
* ramips: Fix setting of rx buffer lengthJohn Crispin2015-10-052-2/+3
* ramips: Allow to receive vlan over untag ports on MT7530John Crispin2015-10-051-3/+33
* ramips: Add build files for HiWiFi HC5x61 modelsJohn Crispin2015-10-052-0/+53
* ramips: Add DTS files for HiWiFi HC5x61 modelsJohn Crispin2015-10-054-0/+299
* ramips: Add base-files for HiWiFi HC5x61 modelsJohn Crispin2015-10-055-10/+45
* ralink: add irq to mt7628 gpio nodeJohn Crispin2015-10-011-0/+3
* ralink: the mmc driver can now handle CD lines that are active lowJohn Crispin2015-10-011-4/+14
* ralink: speed selection was broken in spi-mt7621John Crispin2015-10-011-4/+5
* ramips: Fix pinmux functions for MT7621John Crispin2015-09-162-16/+16
* ramips: add mt7621/3/8 support to the I2C driverJohn Crispin2015-09-161-9/+34
* ramips: fix reported vendor nameJohn Crispin2015-09-161-0/+22
* ramips: add proper mt7688 detectionJohn Crispin2015-09-162-2/+116
* ramips: add speed and mode settings to spi-mt7621John Crispin2015-09-161-13/+178
* ramips: add get_direction() callback and irq support to gpio-mt7621John Crispin2015-09-161-12/+188
* ramips: more m7628 pinmux fixesJohn Crispin2015-09-161-0/+131
* ramips: add mt7628 pwm driverJohn Crispin2015-09-161-0/+204
* ramips: make pinctrl work on newer socsJohn Crispin2015-09-161-20/+27
* ramips: make the mt7628 spi driver work for both cs linesJohn Crispin2015-09-161-8/+7
* ramips: make the early_printk code detect which uart is usedJohn Crispin2015-09-161-2/+27
* ramips: Added WIZnet WizFi630A Platform based on Ralink RT5350John Crispin2015-09-147-1/+217
* ramips: add support for Planex DB-WRT01John Crispin2015-09-147-0/+111
* ramips: fix chunked-io support for big flash chips (#20504)Felix Fietkau2015-09-141-3/+6
* ramips: enable external amplifier for Xiaomi MiWiFi MiniFelix Fietkau2015-09-121-0/+5
* ramips: Enable RTC support for PBR-M1Felix Fietkau2015-09-111-0/+1
* kernel: update 3.18 to 3.18.21Jonas Gorski2015-09-028-14/+14
* ramips: fix devicetree corruption with some boot loaders if the caches are no...Felix Fietkau2015-09-021-0/+18
* ramips: disable the openwrt commandline hackJonas Gorski2015-08-306-6/+0
* ramips: move patches aroundJohn Crispin2015-08-171-0/+0
* ramips: base-files: optimize etc/diag.sh and etc/board.d/01_leds scriptsJohn Crispin2015-08-172-424/+235
* ramips: use consistent naming scheme for LEDsJohn Crispin2015-08-1780-612/+694
* ramips: reorder the sysupgrade scriptJohn Crispin2015-08-171-13/+13
* ramips: reorder patchesJohn Crispin2015-08-1711-5/+3
* ramips: Fix MT7621 pinmux bits for uart3, uart2, mdioJohn Crispin2015-08-171-9/+26
* ramips: Fix amount of MT7621 pins controlled by spi groupJohn Crispin2015-08-171-1/+1
* ramips: Fix uart2/uart3 pinmux order on MT7621John Crispin2015-08-171-4/+4
* ramips: remove unnecessary LED declaration for WT1520 in diag.shJohn Crispin2015-08-171-3/+0