summaryrefslogtreecommitdiff
path: root/target/linux/ramips
Commit message (Expand)AuthorAgeFilesLines
* ramips: use CONFIG_MTD_SPLIT_UIMAGE_FW instead of CONFIG_MTD_UIMAGE_SPLITFelix Fietkau2015-01-026-6/+6
* ramips: fix image format for WSR-1166Felix Fietkau2015-01-022-1/+20
* ramips: disable ethernet checksum offloads for mt7621, they are brokenFelix Fietkau2015-01-021-1/+10
* ramips: use netif_receive_skb instead of napi_gro_receive when rx csum offloa...Felix Fietkau2015-01-021-1/+4
* ramips: rework and fix m25p80 chunked-io supportFelix Fietkau2015-01-023-94/+120
* ramips: split mt7621 spi into a separate driver, increase maximum transfer sizeFelix Fietkau2015-01-029-453/+456
* honor the bootloader's bootargsImre Kaloz2015-01-021-0/+40
* ralink: remove partitoon map from mt7621.dtsiJohn Crispin2014-12-151-31/+0
* add "preinit_regular" diag.sh set_state argumentJohn Crispin2014-12-151-0/+3
* ramips: update mtd patches to apply after changes from r43700Rafał Miłecki2014-12-152-10/+8
* ralink: drop old pinmux nodes from dts filesJohn Crispin2014-12-144-27/+0
* ramips:Add support for Aigale Ai-BR100John Crispin2014-12-138-0/+137
* ralink: fix lenovo y1 wan port mappingJohn Crispin2014-12-121-2/+2
* ralink: make uartf functional on AWM002John Crispin2014-12-121-1/+1
* ralink: mt7621 was missing a symbol that made the CC builder failJohn Crispin2014-12-111-0/+1
* kernel: refresh patchesFelix Fietkau2014-12-0820-320/+217
* ramips: generate factory images for Nexx devicesJohn Crispin2014-12-074-49/+91
* ralink: mt7621 is a 1004KcJohn Crispin2014-12-032-5/+8
* ralink: fix pci reset patchJohn Crispin2014-11-241-3/+11
* ralink: add proper reset of pci coreJohn Crispin2014-11-241-0/+29
* ralink: various fixes to the wm8960 setup codeJohn Crispin2014-11-191-127/+221
* ralink: make the dmaengine driver compile under 3.14John Crispin2014-11-191-35/+0
* ralink: fix tx vlan offload and hardware statusJohn Crispin2014-11-192-27/+40
* ralink: support netconsoleJohn Crispin2014-11-191-0/+15
* ralink: improve tx vlan offloadJohn Crispin2014-11-192-0/+55
* ralink: merge the mt7620a/n subtargetsJohn Crispin2014-11-1912-239/+44
* ralink: set ralink_soc on mt7621John Crispin2014-11-171-12/+24
* ralink: fix pcie resetJohn Crispin2014-11-172-11/+21
* ramips: disable 2.4 ghz on 802.11ac wifi on WHR-1166DFelix Fietkau2014-11-161-0/+1
* ramips: use mediatek,mtd-eeprom instead of ralink for mt76Felix Fietkau2014-11-161-1/+1
* ramips: fix default config breakage on whr-1166dFelix Fietkau2014-11-161-1/+1
* ralink: few updates tot he sdhci probe codeJohn Crispin2014-11-156-59/+76
* ralink: make the sdhci module build againJohn Crispin2014-11-142-17/+20
* ralink: dont define pm_poweroffJohn Crispin2014-11-142-0/+15
* ralink: fix bank detection in mt7621 gpio driverJohn Crispin2014-11-141-12/+21
* ralink: enable the proper drivers in the mt7621 configJohn Crispin2014-11-141-23/+3
* ralink: fix broken pinmux function naming inside mt7621.cJohn Crispin2014-11-141-30/+50
* ralink: update sdhci driverJohn Crispin2014-11-141-936/+2332
* ralink: update pcie driver to load ranges from dtsJohn Crispin2014-11-144-30/+114
* ralink: add a new global ralink_soc variableJohn Crispin2014-11-141-0/+230
* ralink: update ethernet driver to use new ralink_soc variableJohn Crispin2014-11-142-42/+7
* ralink: fix the 10mbit bug on mt7621John Crispin2014-11-141-1/+1
* ralink: improve mt7530 supportJohn Crispin2014-11-141-2/+16
* ralink: add support for WSR-600/1166John Crispin2014-11-147-1/+317
* ralink: mt7621 has a different base addr for PVIDJohn Crispin2014-11-141-1/+19
* ralink: drop some unused code from pci-mt7620aJohn Crispin2014-11-141-18/+8
* ralink: fix up dts for mt7621 eval boardJohn Crispin2014-11-124-26/+9
* ralink: add support for mt7621 ethernetJohn Crispin2014-11-1210-6109/+342
* ralink: more mt7530 fixesJohn Crispin2014-11-111-2/+2
* ralink: fix mdio polling of external phys if only 1 phy existsJohn Crispin2014-11-111-0/+3
generated by cgit v1.1 at 2024-12-04 22:32:32 +0000