summaryrefslogtreecommitdiff
path: root/target/linux/ramips
Commit message (Collapse)AuthorAgeFilesLines
* ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GRGabor Juhos2012-10-192-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33864
* ramips: add profile and build image for the TEW-691GR boardGabor Juhos2012-10-182-0/+15
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33852
* ramips: add user-space support for TEW-691GRGabor Juhos2012-10-185-0/+12
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33851
* ramips: rt3883: add initial support for the TRENDnet TEW-691GR boardGabor Juhos2012-10-185-1/+111
| | | | | | | | No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33850
* ramips: add profile and build image for the TEW-692GR boardGabor Juhos2012-10-182-0/+34
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33849
* ramips: add user-space support for the TEW-692GR boardGabor Juhos2012-10-185-0/+20
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33847
* ramips: rt3883: add initial support for TRENDnet TEW-692GR boardGabor Juhos2012-10-185-0/+159
| | | | | | | | No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33846
* ramips: add profile and build image for the DIR-645 boardGabor Juhos2012-10-182-0/+61
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33845
* ramips: add user space support for the DIR-645Gabor Juhos2012-10-186-0/+50
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33844
* ramips: rt3883: add inital support for the DIR-645 boardGabor Juhos2012-10-185-1/+162
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33843
* ramips: use get_magic_long in sysupgrade image checkGabor Juhos2012-10-181-2/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33842
* ramips: add image for ALL0256N-8MGabor Juhos2012-10-041-0/+1
| | | | | | | | | | | | The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB. In order to expose the whole amount of flash, add another image which contains the corresponding GENERIC_8M mtdparts. [juhosg: change suffix from '8m' to '8M'] Patch by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33614
* ramips: add memory detection code for RT5350Gabor Juhos2012-09-272-1/+44
| | | | SVN-Revision: 33571
* ramips: allow to use custom code for memory size detectionGabor Juhos2012-09-272-6/+13
| | | | SVN-Revision: 33570
* make uci-defaults switch detection work on rt5350John Crispin2012-09-251-1/+1
| | | | SVN-Revision: 33549
* add ethernet support for rt5350John Crispin2012-09-252-18/+106
| | | | SVN-Revision: 33548
* make ramips ethernet use a register mapping tableJohn Crispin2012-09-251-29/+79
| | | | SVN-Revision: 33547
* unbreak port mapping detectionJohn Crispin2012-09-251-0/+1
| | | | SVN-Revision: 33536
* D-Link DAP-1350; Avoid bricking esw configJohn Crispin2012-09-151-1/+1
| | | | | | | | | | | | | | | | | | | | | This is a patch to connect eth0.1 (lan) to the only ethernet connector available. D-Link DAP-1350 goes bricked with AA 12.09-beta. This is because the current esw configuration for the board connects eth0.2 (wan) to the *ONE and ONLY* ethernet connector available, preventing initial access to the board through 192.168.1.1 on eth0.1 after flashing, effectively bricking the board. There are things that should be done to make this board really useful, but for AA 12.09, this one liner is indispensable. Signed of by Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 33411
* ramips/rt3883: fix a typo in the ASUS profileJohn Crispin2012-09-151-1/+1
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33410
* ramips/rt305x: add initial support for Rt5350 SoCGabor Juhos2012-09-125-2/+41
| | | | | | | | | | | | | Somehow detecting the RAM size in common/setup.c doesn't work here, it always detects 64M and then crashes on devices with less RAM. Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how it could be, for now I use the mem=32M kernel parameter to get stuff working. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33381
* ramips: Add missing andmask to ramips_esw register read for recv_good value.Gabor Juhos2012-09-051-1/+3
| | | | | | | | | | | | | Add missing andmask to ramips_esw register read for recv_good value. Without the mask, recv_bad leaks into the recv_good packet count. Didn't notice the bug before since you don't usually get bad packets, so I only saw it when I was playing with overlength packets earlier... Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33322
* ramips: Use doubletagging to disable ramips_esw vlan by default, it seems ↵Gabor Juhos2012-09-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | more reliable. Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. Daniel Golle found an issue where sometimes (possibly only for RT3352) the default vlan disable method (clearing en_vlan, untag, doubletag and putting all ports into vlan 0) doesn't work and the packets get sent out vlan-tagged with vlan 0. Instead switch to using the doubletagging method (allow doubletagged packets, put all ports into vlan 0 with untag enabled) by default. Unless someone figures out a way to really globally disable vlan for this switch, this seems like the best (most reliable) option. I did some tests regarding maximum packet size and did not see any difference between the two methods, both allow for slightly bigger packets than the ramips_main.c ethernet driver (ping stops going through above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until "ping -s 1490", or about 1532 bytes). Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33321
* ramips: add rssileds to package set in profile for devices which got them.Gabor Juhos2012-09-051-1/+1
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33316
* ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002Gabor Juhos2012-08-291-1/+1
| | | | SVN-Revision: 33307
* ramips: make built-in switch transparent for ALL0256N and ALL5002Gabor Juhos2012-08-293-3/+6
| | | | | | | | This allows them to transparently communicate with an external VLAN switch. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33305
* ramips: Power down phy on disabled switch portsGabor Juhos2012-08-291-5/+67
| | | | | | | | | | | | | | Power down phy on disabled switch ports. Haven't measured this myself yet, but according to this http://www.8devices.com/community/viewtopic.php?f=6&t=156 it can save about 300mW of power. [juhosg: fix checkpatch warning] Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33304
* ramips: Add support for 8devices Carambola dev board.Gabor Juhos2012-08-2911-0/+62
| | | | | | | | | | | | Add support for 8devices Carambola dev board. The Carambola is a small RT3050-based development board with two ethernet ports, on-board chip antenna, usb and plenty of accessible gpio ports, sold by 8devices. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33303
* ramips: Rename POC registersGabor Juhos2012-08-291-31/+31
| | | | | | | | | | | | | | | | | | Rename POC registers. The current code uses POC1-POC3. The datasheet uses: POC1: Port Control 0 POC1: Port Control 1 POC2: Port Control 2 So the first POC1 is a typo that should have been POC0, rename the registers to POC0-POC2 accordingly. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33302
* ramips: Minor ramips_esw.c cleanupGabor Juhos2012-08-294-62/+18
| | | | | | | | | | | | Stop handling VLAN setup in the kernel. Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for WL-351 and add some extra comments. Also removes the en_vlan per-port flag that isn't very useful really, it now is only controlled by the global enable_vlan flag. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33301
* ramips: Add switch setup to uci network defaultsGabor Juhos2012-08-291-1/+26
| | | | | | | | | | | | | | Add switch setup to uci network defaults. The 'lan' attribute is used to decide into which vlan to put the port. Currently 'disable' is never set, but the intention is to use this for devices like the 8devices Carambola, which only has two ports hooked up to the SoC. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33300
* ramips: Add swconfig support to ramips_esw.cGabor Juhos2012-08-292-35/+755
| | | | | | | | | | | | | | | | | | | Add swconfig support to ramips_esw.c This patch adds swconfig support for ramips_esw: Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external rtl8366rb on internal port 5). I've made sure that in the enable_vlan=0 case it behaves like a dumb switch, so external switches should work fine with vlans and verified this on the WL-351. The current state shown by swconfig is always read directly from HW registers, new settings only show after 'swconfig dev rt305x set apply'. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33299
* ramips: ramips_esw.c indentation cleanupGabor Juhos2012-08-291-11/+11
| | | | | | | | | | Minor indentation cleanup. Prepare for the main swconfig patch by cleaning up indentation a bit. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33298
* ramips: fix board parameter for the NBG-419N (#12061)Gabor Juhos2012-08-221-1/+1
| | | | SVN-Revision: 33229
* ramips: add profile for Allnet devicesGabor Juhos2012-08-221-0/+41
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33225
* ramips: add RSSI leds for uci-defaults for ALL0256NGabor Juhos2012-08-221-0/+4
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33220
* ramips: add board alias for the ALL0239-3GGabor Juhos2012-08-1710-2/+36
| | | | | | | | | | | | | | Generate image for the ALL0239-3G which can be flashed through the chipset-vendor SDK based firmware's web-interface and bootloader. The bootloader seems to ignore uImage checksum errors, but does complain about them once the 0xDEADC0DE was replaced by an actual JFFS2 page. I'm working on implementing fixtrx for uImage in the mtd package to solve this. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33206
* ramips: add support for D-Link DIR-615 H1Gabor Juhos2012-08-1713-4/+152
| | | | | | | | | | | | rt2x00 still needs some patching as the radio doesn't come to life. Installation via webflash. [juhosg: fix whitespace issues, remove rt305x_register_usb from machine setup because the board has no USB port] Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi> SVN-Revision: 33205
* ramips: rename rt3352 usb platform devicesGabor Juhos2012-08-121-2/+2
| | | | | | | | | In order to get OHCI/EHCI working on the Rt3352, the platform device must be named so rt3883-?hci will recognize it. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33145
* ramips: watchdog: use maximum possible timeout by defaultGabor Juhos2012-08-121-6/+6
| | | | | | | | | | | | | As the userspace has no means to determine the maximum possible timeout, use that as the default and let the userspace lower it when necessary. As the result the usual OpenWrt install (with busybox's watchdog trying to set the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at 384MHz instead of the current 20s default. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33144
* ramips: provide means to specify custom "image name" for uImages, use for ↵Gabor Juhos2012-08-121-4/+5
| | | | | | | | | | | DIR-620 D-Link's DIR-620 allows to flash a uImage directly from its web-interface but for that the image name should be set to DIR_620. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33143
* ramips: add D-Link DIR-620 A1 supportGabor Juhos2012-08-1210-6/+81
| | | | | | | | | | | | Full functionality runtime tested, installation via OEM web-interface requires a follow-up patch. Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing bits (including the antiparallel wps led). Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33142
* move rt305x-dwc driver to target specific modules.mkFlorian Fainelli2012-07-251-0/+26
| | | | SVN-Revision: 32864
* DWC otg usb: compilation fixes and trivial bugfix in slave modeJohn Crispin2012-07-245-5/+45
| | | | | | Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru> SVN-Revision: 32823
* D-Link DAP-1350 initial supportJohn Crispin2012-07-2411-0/+136
| | | | | | | | | The initial support for the D-Link DAP-1350. USB related functionality is not tested. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 32821
* initial LED configuration for Fonera 2.0nJohn Crispin2012-07-241-1/+2
| | | | | | | | Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips) Signed-off-by: Malte Forkel <malte.forkel@berlin.de> SVN-Revision: 32819
* add ALL5002 userspace supportJohn Crispin2012-07-245-1/+9
| | | | | | | | detect EEPROM, MAC addresses and support sysupgrade for the ALL5002 Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32816
* enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.John Crispin2012-07-243-2/+4
| | | | | | | | Hope that this works, didn't have a chance to actually test it... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32815
* add image build for ALL5002John Crispin2012-07-241-0/+14
| | | | | | | | add image build for ALL5002 Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32814
* add support for Allnet ALL5002 to kernelJohn Crispin2012-07-245-0/+71
| | | | | | | | support ALL5002 in ramips/rt305x branch of the kernel. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32813