summaryrefslogtreecommitdiff
path: root/target/linux/ramips
Commit message (Expand)AuthorAgeFilesLines
...
* clean up handling of some kernel symbolsImre Kaloz2010-02-112-2/+0
* re-sort all target and subtarget config filesImre Kaloz2010-02-112-11/+11
* ramips: nuke 2.6.30 supportGabor Juhos2010-01-3110-756/+0
* ramips: enable RTL8366SR driver for the RT288x devicesGabor Juhos2010-01-311-0/+3
* ramips_eth: cleanup mac_address changingGabor Juhos2010-01-311-19/+12
* ramips_eth: update register offsetsGabor Juhos2010-01-311-8/+8
* ramips_eth: pass sys_clk via platform_dataGabor Juhos2010-01-313-2/+5
* ramips_eth: add helper functions to {ed,dis}able interruptsGabor Juhos2010-01-311-6/+21
* ramips_eth: remove unnecessary typecastsGabor Juhos2010-01-311-2/+2
* ramips_eth: simplify tx_next computationGabor Juhos2010-01-311-5/+2
* ramips_eth: simplify tx descriptor initializationGabor Juhos2010-01-311-3/+2
* ramips_eth: pass 'raeth_priv' struct directly to dma specific functionsGabor Juhos2010-01-311-39/+35
* ramips: switch to 2.6.32Gabor Juhos2010-01-311-1/+1
* ramips_eth: convert to use netdev_opsGabor Juhos2010-01-311-6/+12
* ramips_eth: fix invalid register writesGabor Juhos2010-01-301-4/+5
* ramips_eth: move memset call out from the loopGabor Juhos2010-01-301-1/+1
* ramips_eth: header file cleanupGabor Juhos2010-01-301-144/+146
* ramips_eth: coding style cleanupGabor Juhos2010-01-301-54/+66
* ramips: register gpio buttons on the Fonera 2.0N boardGabor Juhos2010-01-302-0/+27
* ramips: register gpio buttons on the WHR-G300N boardGabor Juhos2010-01-302-1/+45
* ramips: register gpio buttons on the V22RW-2x2 boardGabor Juhos2010-01-302-1/+26
* ramips: register gpio buttons on the DIR-300 revB boardGabor Juhos2010-01-304-3/+28
* ramips: fix wrong base addresses for the RT288xGabor Juhos2010-01-301-4/+5
* ramips: include 'linux/leds.h' from 'dev-gpio-leds.h'Gabor Juhos2010-01-307-8/+2
* ramips: rename dev_gpio_leds.h to dev-gpio-leds.hGabor Juhos2010-01-307-6/+6
* ramips: cleanup WZR-AGL300NH board support fileGabor Juhos2010-01-301-33/+9
* ramips: register gpio-buttons on the RT-N15 boardGabor Juhos2010-01-304-2/+28
* ramips: add common gpio-buttons deviceGabor Juhos2010-01-308-1/+97
* ramips: register rtl8366s device on the RT-N15 boardGabor Juhos2010-01-302-2/+24
* ramips: sanitize return value of ramips_gpio_getGabor Juhos2010-01-301-1/+1
* ramips: update mips multi-machine stuffGabor Juhos2010-01-3011-59/+285
* ramips: add preliminary support for 2.6.32Gabor Juhos2010-01-269-0/+626
* ramips: refresh patchesGabor Juhos2010-01-262-11/+7
* ramips: sync kernel configGabor Juhos2010-01-261-6/+5
* add initial support for the WZR-AGL300NH - patch by Joonas Lahtinen <joonas.l...Jo-Philipp Wich2010-01-246-6/+126
* update to 2.6.30, refresh patchesFlorian Fainelli2009-12-041-1/+1
* some more Kconfig symbol move..Imre Kaloz2009-11-112-4/+0
* another round of kernel config cleanupsImre Kaloz2009-11-112-6/+0
* sort all target config filesImre Kaloz2009-11-112-11/+11
* ramips: register ethernet device on the WHR-G300N and V22RW-2x2 boardsGabor Juhos2009-10-302-2/+2
* missing header file changes, and fix mtu valueJohn Crispin2009-10-302-1/+2
* fixes rx path for eth, spinlock it, increases buffer size, board now survives...John Crispin2009-10-291-28/+23
* hopefully fixes dma issues seen on ethernet driver when under high loadJohn Crispin2009-10-291-2/+7
* ramips: move 'arch/mips/include/asm/mach-ralink/eth.h' to 'drivers/net/ramips...Gabor Juhos2009-10-262-1/+1
* ramips: use definitions from rt305x_regs, and nuke the duplicated onesGabor Juhos2009-10-262-5/+2
* ramips: move ramips_eth_platform_data into a separate fileGabor Juhos2009-10-264-8/+32
* ramips: request_irq prior to dma allocation, and handle the case if it failsGabor Juhos2009-10-261-2/+10
* ramips: add error handling to ramips_alloc_dmaGabor Juhos2009-10-261-7/+29
* ramips: free allocated skbs in ramips_cleanup_dmaGabor Juhos2009-10-261-0/+5
* ramips: add ramips_setup_dma helper to the ethernet driverGabor Juhos2009-10-261-6/+15