summaryrefslogtreecommitdiff
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* mvebu: set WRT1900AC WAN interface MAC addressImre Kaloz2015-02-231-1/+2
| | | | | | | | | Toggles the LA bit on the WAN interface. Signed-off-by: Claudio Leite <leitec@staticky.com> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 44508
* ipq806x: delete config-3.14 fileJohn Crispin2015-02-221-360/+0
| | | | | | | | | ipq806x target has been upgraded to 3.14. There is no need to maintain this file anymore. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 44505
* ipq806x: fix "reboot" commandJohn Crispin2015-02-223-0/+175
| | | | | | | | | | | | | | | | | | | The watchdog driver already registers a restart notifier, we just have to enable it in the config and in the DT to fix the "reboot" command. This is done by integratin the following patch-set: https://lkml.org/lkml/2015/2/20/610 I'm copy-pasting the description below: qcom-wdt is currently assuming the presence of a dedicated node in DT to gets its configuration. However, on msm architecture, the watchdog is usually part of the timer block. So this patch-set is changing the driver and slightly enhancing the timer DT bindings to provide the relevant clocks and interrupts. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 44504
* ipq806x: enable watchdog kernel optionJohn Crispin2015-02-221-1/+2
| | | | | | | | | | Some bootloaders seem to trigger the watchdog during the boot process, therefore the lack of watchdog driver trigger a reboot a few seconds after boot. So we'll enable it here to avoid it. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 44503
* kernel: Fix USB gadget modules for v3.18John Crispin2015-02-221-0/+1
| | | | | | | | Updated patch that fixes whitespace and supports kernel v3.3 too. Signed-off-by: Owen Kirby <osk@exegin.com> SVN-Revision: 44502
* mpc85xx: add mpic timer clock frequency to avoid boot log warningJohn Crispin2015-02-221-0/+48
| | | | | | | | | | | | | | | | | MPIC timers are enabled in the config, however a devicetree clock setting is missing causing the following error: /soc@ffe00000/timer@41100: cannot get timer frequency. /soc@ffe00000/timer@42100: cannot get timer frequency. This patch adds the missing clock and avoids the error. It's a functional copy of this code do_fixup_by_compat_u32(blob, "fsl,mpic", "clock-frequency", get_bus_freq(0), 1); in arch/powerpc/cpu/mpc85xx/fdt.c in the u-boot code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44501
* ramips: rt288x: add missing symbolJohn Crispin2015-02-221-0/+1
| | | | | | | | | Defaulting to disabled, based on the value of the (old?) CONFIG_RALINK_USBPHY Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 44500
* ramips: nexx wt3020: fix status ledJohn Crispin2015-02-221-1/+1
| | | | | | | | | | | For Nexx WT3020 board_name is wt3020, not nexx-wt3020 root@OpenWrt:~# . /lib/ramips.sh; echo $(ramips_board_name) wt3020 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 44499
* bcm53xx: add one more NVRAM possible size (0x180000)Rafał Miłecki2015-02-202-2/+2
| | | | | | | | | Size 0x160000 was added to support Buffalo WZR-600DHP2, however Netgear devices (R6250, R8000) require 0x180000. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44497
* mpc85xx: set v3.18 as defaultJohn Crispin2015-02-191-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44496
* ralink: bump to v3.18John Crispin2015-02-192-1/+101
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44495
* ramips: fix the mt7628 dts fileJohn Crispin2015-02-192-10/+11
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44494
* at91: Add dts for Exegin Q5x boards.John Crispin2015-02-193-0/+207
| | | | | | Signed-off-by: Owen Kirby <osk@exegin.com> SVN-Revision: 44492
* at91: USB gadget subsystem cleanup and driver fix.John Crispin2015-02-195-11/+103
| | | | | | Signed-off-by: Owen Kirby <osk@exegin.com> SVN-Revision: 44491
* at91: Enable power and reset controller drivers.John Crispin2015-02-191-0/+8
| | | | | | Signed-off-by: Owen Kirby <osk@exegin.com> SVN-Revision: 44490
* at91: bump to v3.18John Crispin2015-02-188-1/+7
| | | | | | Signed-off-by: Your Name <blogic@openwrt.org> SVN-Revision: 44489
* au1000: fix 3.18 and set it as defaultJohn Crispin2015-02-182-1/+12
| | | | | | | | Thanks to Bruno Randolf for testing and Manuel Lauss for providing a fix. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44487
* ar71xx: fix 82_patch_ath10kJo-Philipp Wich2015-02-171-1/+7
| | | | | | | | | | | | The firware md5sum check never worked due to missing dollar signs. Also suppress `md5sum: can't open '/lib/firmware/ath10k/QCA988X/hw2.0/firmware-3.bin'` error on any board not using ath10k. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44486
* mpc85xx: add v3.18 supportJohn Crispin2015-02-179-0/+1207
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44485
* ar71xx: make v3.18 defaultJohn Crispin2015-02-171-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44482
* kernel: re-enable the firmware loaderJohn Crispin2015-02-172-4/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44481
* ramips: Buffalo WZR-AGL300NH target supportJohn Crispin2015-02-165-0/+148
| | | | | | | | | | | | | I got work with this patch. Ethernet switch (includes VLAN), WiFi connected via PCIe, LEDs, buttons. In mtd partion map of DTS file, I renamed Linux firmware regions (kernel + root squashfs) to “firmware”because it allows kernel to split kernel and roots and rootfsdata. signed-off-by: ngc@ff.iij4u.or.jp —— —— SVN-Revision: 44470
* ramips: enables rt288x PCIeJohn Crispin2015-02-163-3/+3
| | | | | | | | | | | To choose whether bulid or not RT288x PCIe bus driver, CONFIG_SOC_RT2880 is wrong. Here is its fix, and enables PCIe bus driver for some targets which have 2nd WiFi chipset via PCIe bus. signed-off-by: ngc@ff.iij4u.or.jp ———— ———— SVN-Revision: 44469
* oxnas: fix itb generationJohn Crispin2015-02-161-2/+2
| | | | | | | | | | | | | | | - according to imx6 Makefile and u-Boot documentation is itb and probably should not be changed - this fixes build error if CONFIG_TARGET_ROOTFS_INCLUDE_FIT is set (missing .itb file) - use DTS_DIR (like in imx6 Makefile) only compile tested Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> Acked-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 44468
* bcm53xx: include kmod-brcmfmac in default profileRafał Miłecki2015-02-161-2/+2
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44467
* bcm53xx: sprom: extract for PCI hostRafał Miłecki2015-02-161-0/+31
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44464
* bcm53xx: sprom: prepare to support other hosttype-sRafał Miłecki2015-02-161-1/+8
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44463
* mvebu: refresh 3.18 patchesImre Kaloz2015-02-167-57/+11
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 44462
* ar71xx: fix mv88e6063 compile for 3.14John Crispin2015-02-151-1/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44459
* ar71xx: fix a compile bug in 902-unaligned_access_hacks.patchJohn Crispin2015-02-151-151/+78
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44458
* ar71xx: add v3.18 supportJohn Crispin2015-02-1586-1/+9381
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44456
* mvebu: fix WRT1900AC ubinized imagesImre Kaloz2015-02-141-3/+4
| | | | | | | | | | The current pxa3xx_nand driver doesn't support sub-page writing, so the VID header offset must be specified explicitly. Signed-off-by: Claudio Leite <leitec@staticky.com> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 44455
* ralink: fix the config filesJohn Crispin2015-02-1412-0/+1098
| | | | | | | | oops, accidently moved instead of copied them Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44454
* ar71xx: ZyXEL NBG6716 rfkill switch fixJohn Crispin2015-02-141-2/+2
| | | | | | | | ZyXEL NBG6716 "rfkill" is a switch, not a button. Signed-off-by: Marcin Mikolajczak <gr4ffy at gmail.com> SVN-Revision: 44453
* lantiq: disable buffered writes on Intel command set flashJohn Crispin2015-02-142-0/+22
| | | | | | | | | | | | Some Lantiq SoCs are not able to use buffered writes properly with Intel command set flash due to the way NOR addresses on EBU are manipulated. This patch disables buffered writes on those devices. The only device affected at the moment is ARV4510PW, others use AMD/Fujitsu command set. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 44451
* lantiq: Fix flash for targets with NO_XIPJohn Crispin2015-02-142-2/+2
| | | | | | | | | For targets with NO_XIP ltq_mtd->map[i].phys equals -1 and devm_ioremap fails. Fix this by using pdev->resource[i].start instead. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 44450
* brcm2708: add kmod-hwmon-bcm2835 support and more missing symbolsJohn Crispin2015-02-142-0/+18
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44449
* brcm2708: force uart as the default console for procd and remove nonexistent ↵John Crispin2015-02-142-2/+1
| | | | | | | | | | console procd gets last console from cmdline, so swapping tty1 (framebuffer) and ttyAMA0 (uart) is enough to force procd output via uart Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44448
* brcm2708: add board detection and LED supportJohn Crispin2015-02-145-2/+81
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44447
* generic: ocf: irq compat stuff is not needed anymoreNicolas Thill2015-02-141-0/+2
| | | | | | Signed-off-by: Nicolas Thill <nico@openwrt.org> SVN-Revision: 44444
* generic: upgrade to 3.18.7Imre Kaloz2015-02-146-63/+18
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 44442
* ixp4xx: fix gpio_line_set() logic, fixes #18986John Crispin2015-02-131-5/+13
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44439
* brcm2708: fix spidevJohn Crispin2015-02-131-0/+36
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44434
* brcm2708: refresh patchesJohn Crispin2015-02-13114-2950/+645
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44433
* brcm2708: add missing config symbols and fix kernel modules for Raspberry Pi ↵John Crispin2015-02-135-2/+8
| | | | | | | | 2 by removing local version Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44432
* brcm2708: add subtarget copyright and use better board namesJohn Crispin2015-02-132-2/+12
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 44431
* ar7: switch to v3.18John Crispin2015-02-131-1/+1
| | | | | | | | Thank you Dimitri for testing this. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44430
* generic: improve kexec support of MIPS.John Crispin2015-02-133-0/+655
| | | | | | | | | | | | | - Allow --command-line parameters of kexec-tools be parsed and used by the kernel. - For malta machine, mark kernel code and kernel data segments as "System RAM" instead of "reserved" in /proc/iomem, otherwise kexec-tools will complain that program segments in ELF kernel file are invalid. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 44429
* lantiq: fix DGN3500 root deviceJohn Crispin2015-02-131-1/+1
| | | | | | Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 44428
* ar71xx: Add profile and build image for TP-Link MR12U v1John Crispin2015-02-132-0/+11
| | | | | | | | | | | | | | | | | This patch adds corrected profile and build image for the TL-MR12U board. Unfortunately i cannot test the factory image since i can't find anywhere the original chinese firmware but the generated openwrt-ar71xx-generic-tl-mr12u-v1-squashfs-sysupgrade.bin worked just fine over a modified mr3040 factory image i managed to modify to initially flash the mr12u from the original firmware. Proper kernel support probably should be added since cat /proc/cpuinfo shows MR13U. Signed-off-by: Daniel Petre <daniel.petre@gmail.com> SVN-Revision: 44427
generated by cgit v1.1 at 2024-11-17 22:11:39 +0000