summaryrefslogtreecommitdiff
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: Make code formatting consistent on ath79/machtypes.hJohn Crispin2016-02-121-10/+10
| | | | | | Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com> SVN-Revision: 48706
* ar71xx: Added support for TL-WA801NDv3John Crispin2016-02-128-3/+160
| | | | | | Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com> SVN-Revision: 48705
* ar71xx: WNR2000v3: exclude USB modules from imageJohn Crispin2016-02-121-0/+1
| | | | | | | | | Netgear WNR2000v3 has no USB port yet default system image includes USB kernel modules. This patch fixes that. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 48701
* use "-gt" instead of ">" with [ in /lib/functions/lantiq_dsl.shJohn Crispin2016-02-121-2/+2
| | | | | | | | | Avoids inadvertent file creation when executing `/etc/init.d/dsl_control status`. Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> SVN-Revision: 48700
* ramips: Add support for Netgear EX2700John Crispin2016-02-128-1/+177
| | | | | | | | | | | | | | | | This patch adds support for the Netgear EX2700 and builds an approriate sysupgrade image. What's missing is the option to build a factory image flashable via the router's stock web interface, but this approach is hindered by the fact that u-boot operforms an additional integrity check, which expects a uImage header in the last 64 bytes of the "kernel" partition, which the bootloader expects to be 960k, a size exceeded by the standard OpenWrt kernel. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> SVN-Revision: 48698
* zynq: add new targetJohn Crispin2016-02-1210-0/+1101
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Xilinx ZC702 Dev board Zynq target is using 4.4 kernel and mainline 2016.1 u-boot. Patch is tested with Xilinx ZC702 Dev board with SD boot mode. known issues: - no QSPI driver in 4.4 kernel: no QSPI flash support - USB is not working in 4.4 kernel Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> create mode 100644 package/boot/uboot-zynq/Makefile create mode 100644 target/linux/zynq/Makefile create mode 100644 target/linux/zynq/base-files.mk create mode 100755 target/linux/zynq/base-files/etc/board.d/02_network create mode 100644 target/linux/zynq/base-files/etc/config/network create mode 100644 target/linux/zynq/base-files/etc/inittab create mode 100644 target/linux/zynq/config-4.4 create mode 100644 target/linux/zynq/image/Makefile create mode 100755 target/linux/zynq/image/mkits.sh create mode 100644 target/linux/zynq/patches-4.4/0001-arm-dts-zynq-zc702.dts-Set-default-rdinit-to-sbin-in.patch create mode 100644 target/linux/zynq/profiles/zc702.mk SVN-Revision: 48697
* ag71xx: fix build error with debugfs codeFelix Fietkau2016-02-111-5/+7
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48695
* ag71xx: increase rx ring size to improve performanceFelix Fietkau2016-02-111-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48694
* ag71xx: store ring size order instead of ring size to avoid div/modFelix Fietkau2016-02-113-41/+58
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48693
* ag71xx: increase tx ring size to improve performanceFelix Fietkau2016-02-111-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48692
* ag71xx: optimize icache footprint of the receive poll functionFelix Fietkau2016-02-111-3/+10
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48691
* kernel: fix uninitialized variable in bridge multicast-to-unicast patch on 4.3Felix Fietkau2016-02-111-2/+5
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48690
* mvebu: fix WRT1900AC v1 LED driver moduleJo-Philipp Wich2016-02-091-1/+1
| | | | | | | | | | | | | Update OpenWRT build tree to reflect changes in TLC-591xx LED family driver. In kernels < 4.0 the driver was present in form of a patch for the TLC-59116 chip, and was upstreamed later in kernels > 4.0 to support the entire chip family. Signed-off-by: Sebastian Careba <nitroshift@yahoo.com> [jow: fix Kconfig symbol name] Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 48684
* x86: preserve partition table on sysupgradeJo-Philipp Wich2016-02-092-2/+51
| | | | | | | | | | | | | | With this patch sysupgrade will write directly to the partitions instead of to the main disk. The UUID is copied from the image to the MBR as well. This prevents the mbr from being completely overwritten and losing the partition table. The -p option has been added to maintain the original behavior and overwite the entire disk with the new image. Tests have been added to ensure that the image partitions match up with the active partitions. Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net> SVN-Revision: 48682
* ramips: fix build error on oversized images by putting the dir-860l-b1 size ↵Felix Fietkau2016-02-081-2/+2
| | | | | | | | check at the end of the chain Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48681
* generic: add missing kconfig symbolJo-Philipp Wich2016-02-082-0/+2
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 48675
* x86: remove unrelated config overrideJo-Philipp Wich2016-02-081-1/+0
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 48668
* brcm2708: add missing symbolsJohn Crispin2016-02-084-0/+12
| | | | | | | | | | | | enable CONFIG_PWM enable the RASPI PWM stuff fix buildbot w. 4.1 compile tested only Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 48667
* ramips: HLK-RM04 - Enable GPIO14 for WPS buttonJohn Crispin2016-02-084-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The top half of UARTF on the HLK-RM04 is used for GPIO. mode 1 mode 2 RIN GPIO14 DSR_N GPIO13 DCD_N GPIO12 DTR_N GPIO11 RXD GPIO10 CTS_N GPIO09 TXD GPIO08 RTS_N GPIO07 This patch applies 3'b101 mode to UARTF: GPIO14 GPIO13 GPIO12 GPIO11 RXD CTS_N TXD RTS_N Because the base rt5350.dtsi file forces 3'b000 mode, remove the pin setting from this file and apply it directly to the files that inherit from it (WIZFI630A.dts and WT1520.dtsi). This change makes the rt5350.dtsi file consistent with the mt7620a.dtsi file. Signed-off-by: John Clark <inindev@gmail.com> SVN-Revision: 48665
* rampis: HLK-RM04 - Setup I2C as GPIOJohn Crispin2016-02-081-1/+20
| | | | | | | | | | | | | | | | | | | The I2C function of the RT5350 SoC on the HLK-RM04 is used for GPIO1 and GPIO2. Take note that the I2C_SD pin is GPIO1 on the RT5350 and is exposed on the HLK-RM04 as GPIO0 Likewise the I2C_SCLK pin is GPIO2 on the RT5350 and is exposed on the HLK-RM04 as GPIO1 group mode 1 mode 2 hlk-rm04 pin & export i2c i2c_sd gpio1 (pin 8, hlk-rm04:gpio0) i2c i2c_sclk gpio2 (pin 9, hlk-rm04:gpio1) reference: http://www.hlktech.net/product_detail.php?ProId=39 http://cdn.sparkfun.com/datasheets/Wireless/WiFi/RT5350.pdf Signed-off-by: John Clark <inindev@gmail.com> SVN-Revision: 48664
* ramips: HLK-RM04 - Fix push button functionsJohn Crispin2016-02-081-3/+7
| | | | | | | | | The RESET button of the HLK-RM04 is connected to GPIO0, linux function 0x198 The WPS button of the HLK-RM04 is connected to GPIO14, linux function 0x211 Signed-off-by: John Clark <inindev@gmail.com> SVN-Revision: 48663
* ramips: HLK-RM04 - Remove power LED configJohn Crispin2016-02-081-9/+0
| | | | | | | | | The power LED on the HLK-RM04 is hard wired to the power bus and is not under GPIO control, remove the bogus config for it. (Note that GPIO0 is actually connected to the RESET button.) Signed-off-by: John Clark <inindev@gmail.com> SVN-Revision: 48662
* lantiq: VGV7510KW22/VGV7519 update spi pinmux groupJohn Crispin2016-02-082-2/+2
| | | | | | | | | | | | | With the backport of the kernel 4.5 pinctrl-xway patches (3551609d & 826bca29) the pinmux group "spi" was splitted into "spi_di", "spi_do" & "spi_clk". But the no longer existing group "spi" is still used by some device tree source files. This fixes the detection of the wireless chipset of the VGV7510KW22. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48658
* lantiq: BTHOMEHUBV5A - explicit select the flash deviceJohn Crispin2016-02-081-1/+1
| | | | | | | | | | | | | The stock u-boot doesn't disable unused flash banks. Therefore, the nand driver tries to initialize a not connected NOR flash and the device hangs on boot. Workaround the issue by selecting the second flash bank (NAND). Signed-off-by: Mathias Kresin <openwrt@kresin.me> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48657
* lantiq: fix wrong parameter order in xway_nand driverJohn Crispin2016-02-081-1/+1
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48656
* ar71xx: register only the built-in switch MDIO bus, hook up eth0 to it, ↵Felix Fietkau2016-02-071-1/+2
| | | | | | | | should hopefully fix regression reported in #21520 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48652
* ar71xx: fix MDIO bus probe on QCA956xFelix Fietkau2016-02-071-1/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48651
* ar71xx: fold patch 622-MIPS-ath79-add-support-for-QCA956x-ethernet.patch ↵Felix Fietkau2016-02-073-343/+56
| | | | | | | | into files/ Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48650
* mpc85xx: fix TL-WDR4900 mac address assignment to match original firmwareFelix Fietkau2016-02-072-1/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48645
* bcm53xx: add Netgear R8500 GPIOsRafał Miłecki2016-02-052-2/+78
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48633
* kernel: add missing config symbol (#21797)Felix Fietkau2016-02-051-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48632
* sunxi: update orangepi-plus profile to reflect the real uboot packageZoltan Herpai2016-02-031-1/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 48626
* bcm53xx: start working on Netgear R8500Rafał Miłecki2016-02-035-0/+84
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48625
* b53: support setting port linkRafał Miłecki2016-02-031-0/+31
| | | | | | | | | When dealing with Broadcom hardware we can simply use swconfig's generic helper, we just need to do some validation of requested state. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48623
* b53: provide PHY access to swconfigRafał Miłecki2016-02-033-0/+48
| | | | | | | | | Thanks to this change swconfig can access port PHYs e.g. when setting port link state with a generic helper. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48622
* swconfig: add (PHY) generic helper setting port linkRafał Miłecki2016-02-032-0/+42
| | | | | | | | | | It's quite common for switches to have PHY per port so adding a generic helper setting link state will help many drivers. It just needs an API to access PHYs which this patch also adds. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48621
* sunxi: bump to 4.4Zoltan Herpai2016-02-031-1/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 48620
* sunxi: add support for Orange Pi Plus (H3)Zoltan Herpai2016-02-023-2/+24
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 48618
* ramips: add IMAGE_SIZE to DEVICE_VARS, it is used by build templatesFelix Fietkau2016-02-011-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48611
* bcm53xx: fix bcma-hcd compilation in kernel 4.4Rafał Miłecki2016-02-011-1/+1
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48607
* bcm53xx: build D-Link DIR-885L imageRafał Miłecki2016-02-011-1/+32
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48606
* bcm53xx: change brcmnand behavior for ECC strength 1Rafał Miłecki2016-02-011-0/+26
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48605
* bcm53xx: fix NAND parameters on DIR-885LRafał Miłecki2016-02-011-0/+39
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48604
* bcm53xx: add brcmnand patch reading flash parametersRafał Miłecki2016-02-011-0/+53
| | | | | | | | It's useful for adding support for new hardware. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48603
* bcm53xx: include (build) Seama mtdsplit parserRafał Miłecki2016-02-011-0/+2
| | | | | | | | It's needed for devices using Seama like D-Link DIR-885L. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48602
* kernel: mtdsplit: support Seama entity with UBIRafał Miłecki2016-02-012-3/+8
| | | | | | | | | | Some D-Link routers (e.g. DIR-885L) have NAND and use Seama format. It means OpenWrt will want to have UBI in Sseama entity and should be able to detect it. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48600
* kernel: mtdsplit: detect UBI partition when looking for rootfsRafał Miłecki2016-02-012-0/+7
| | | | | | | | | This allows mtdsplit parsers work with UBI which is very popular on NAND flases. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48599
* kernel: mtdsplit: modify rootfs helpers to provide partition typeRafał Miłecki2016-02-019-26/+42
| | | | | | | | | | Our mtdsplit parsers may want to create partition with name choice based on partition file system (e.g. SquashFS vs. JFFS2). This patch allows passing extra argument pointing to variable that will be set properly. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48598
* ar71xx/image: use SOURCE_DATE_EPOCH for mksquashfs-lzmaFelix Fietkau2016-01-311-2/+5
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 48589
* cns3xxx: enable CONFIG_PROC_STRIPPED to improve network performanceFelix Fietkau2016-01-311-2/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48581
generated by cgit v1.1 at 2024-12-30 20:40:00 +0000