summaryrefslogtreecommitdiff
path: root/target/linux
Commit message (Expand)AuthorAgeFilesLines
* generate images for the Infineon EASY 5120-RT boardsGabor Juhos2008-03-281-0/+5
* Fix the xt_physdev compilation (#3218)Florian Fainelli2008-03-272-2/+2
* Revert [10668] this was also accidentalFlorian Fainelli2008-03-271-33/+1
* Revert [10668] was accidentalFlorian Fainelli2008-03-272-5/+2
* Create a dummy sit package for 2.4 kernelsqFlorian Fainelli2008-03-273-3/+37
* Generate a binary lzma-loaderFlorian Fainelli2008-03-262-3/+10
* ixp4xx/apex: Fixed another patch nameRod Whitby2008-03-261-0/+0
* ixp4xx/apex: Add support for fatslugs, and fix the patch namesRod Whitby2008-03-263-0/+28
* The following patch enables txpower setting for hostap driver and restores tx...Travis Kemen2008-03-251-0/+160
* ixp4xx: Updated to 2.6.24.2 - tested on nas100d, fsg3 and nslu2Rod Whitby2008-03-251-1/+1
* apex: Create both 8MB and 16MB apex binariesRod Whitby2008-03-255-7/+362
* ixp4xx/harddisk/config-default: Enable ext2 and disable ext3 extensionsRod Whitby2008-03-251-4/+1
* Fix b44 phyaddr by applying the PHY-address mask. Closes #3712 - Adapted from...Andy Boyett2008-03-231-0/+15
* refresh patchesGabor Juhos2008-03-2219-114/+114
* Enable the default-on led triggerRod Whitby2008-03-222-0/+24
* generic-2.6/config-2.6.24: Added missing config entries to allow compilation ...Rod Whitby2008-03-221-0/+9
* add missing kernel config optionFelix Fietkau2008-03-211-0/+1
* ar7: fixed cpmac, now it doesn't fails to register the phy. Signed-off-by: be...Matteo Croce2008-03-211-0/+49
* linux-2.6: Add a driver to run an MMC or SD card over a GPIO based SPI interf...Michael Büsch2008-03-213-35/+7670
* ixp4xx: Updated patches to include all upstream-merged ixp4xx patchesRod Whitby2008-03-2115-417/+5268
* ixp4xx: Update npe driver patchRod Whitby2008-03-201-1274/+1336
* ixp4xx: Update config-default to 2.6.24Rod Whitby2008-03-201-0/+1
* ixp4xx/patches-2.6.24: Refreshed fsg patch and other affected patchesRod Whitby2008-03-205-324/+314
* cpmac: fixed phy seems to be broken, hack cpmac to always report link upMatteo Croce2008-03-191-0/+27
* bcm47xx: Fix warning arch/mips/bcm947xx/irq.c: In function 'pcibios_map_irq':...Michael Büsch2008-03-191-1/+1
* GPIODEV: Fix open-count race condition.Michael Büsch2008-03-191-7/+14
* bcm47xx: Register a GPIODEV platform device to allow GPIO access via /dev/gpioMichael Büsch2008-03-191-0/+17
* This Patch adds PPS (Pulse per Second) Support to Openwrt 2.6.23 (its depreca...Felix Fietkau2008-03-191-0/+2215
* fix switch support on the Compex WP18/NP18AImre Kaloz2008-03-171-0/+41
* fix image generation on x86Imre Kaloz2008-03-171-1/+1
* bcm47xx: Fix GPIO data direction output bit assignmentMichael Büsch2008-03-151-1/+2
* fix serial patchMatteo Croce2008-03-131-24/+11
* at91: added new sim enable code as well as detection code to differentiate be...Hamish Guthrie2008-03-132-0/+262
* Update cleanups of ssb-gigeMichael Büsch2008-03-131-37/+41
* Removed binary file added in errorHamish Guthrie2008-03-131-0/+0
* Add back support for 2.6.21 kernels - add some required directories.Hamish Guthrie2008-03-133-1/+300
* cpmac: patch to reimplement rx ring with EOQ markers to avoid reset storms (c...Matteo Croce2008-03-111-0/+178
* Add AG241 code pattern (fixes #1089)Matteo Croce2008-03-111-0/+2
* fix apex compile on osx, suppress some build warningsFelix Fietkau2008-03-101-0/+2
* Upgrade x86 to 2.6.24Florian Fainelli2008-03-093-1/+899
* Fix bzImage copy with 2.6.24 kernelsFlorian Fainelli2008-03-091-1/+1
* add new led trigger for network traffic, fixes #2776John Crispin2008-03-073-0/+463
* disable partitions for unallocated redboot flash memory - it caused a null po...Felix Fietkau2008-03-075-2/+3
* Add PCnet32 ethernet support (#3195)Florian Fainelli2008-03-072-0/+4
* 2.6.24: add missing symbol CONFIG_USB_SERIAL_CH431Gabor Juhos2008-03-061-0/+1
* fix cpmac in a more elegant way, thanks Anton VorontsovMatteo Croce2008-03-051-25/+96
* fixed_phy seems to be broken, this simple workaround fixes itMatteo Croce2008-03-051-0/+27
* SSB-GigE: Fix IRQ routing. This makes the device work. Yay! :)Michael Büsch2008-02-281-5/+22
* Fix the roboswitch code for the WRT350NMichael Büsch2008-02-271-18/+89
* Adding rootdelay and quiet parameter (again)Jens Muecke2008-02-251-1/+1
generated by cgit v1.1 at 2024-11-25 00:28:26 +0000