summaryrefslogtreecommitdiff
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ar8216: introduce fixup_phys callback in ar8xxx_chipFelix Fietkau2014-11-191-2/+13
| | | | | | | | | Move phy fixup code from the chip-specific hw_init functions into a fixup_phys callback. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43330
* ar8216: after a switch reset poll until BCMR_RESET is clearedFelix Fietkau2014-11-191-3/+29
| | | | | | | | | | | | Currently there is a fixed 1000ms wait time after the switch was reset. Most if not all switches need much less time to perform a reset. Therefore replace the fixed wait time with polling for BMCR_RESET to be cleared. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43329
* ar8216: introduce global constant for number of PHYsFelix Fietkau2014-11-192-4/+5
| | | | | | | | | | All supported switches have 5 PHYs. Currently partially 5 is hardcoded and partially switch-specific constants exist. Replace them with a global constant. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43328
* brcm47xx: mtd: bcm47xxpart: lower minimal blocksize to 4Ki (from 64Ki)Rafał Miłecki2014-11-192-0/+86
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 43322
* ixp4xx: Don't overwrite memory in wg302v1_fixup()John Crispin2014-11-191-12/+12
| | | | | | | | | | | | | | | | wg302v1_fixup() looks for the ATAG_CMDLINE atag, it doesn't find it and so it takes the last atag in the list and overwrites non allocated memory. The side effects are corrupted vital data and a kernel that doesn't boot. More details here https://dev.openwrt.org/ticket/18356 The fix appends the fixup to the command line and updates the atag only when it finds it. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> SVN-Revision: 43320
* gemini: add basic nas4220 board supportJohn Crispin2014-11-196-2/+76
| | | | | | | | | | | | Few notes: - redboot partitions are unusable - redboot declares only 16M of RAM, hence the mem arg in cmdline and separate kernel config - boots fine but only ethernet works for now - split wiliboard and raidsonic boards into different subtargets Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 43319
* mpc85xx: add 3.14 kernel support for mpc85xx platformJohn Crispin2014-11-199-0/+1236
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds 3.14 kernel support for the mpc85xx platform. Works fine here with a TL-WDR4900 which seems to be the only supported device using this platform. There might be differences depending on HW version, therefore I'd ask others to test too. Changes to 3.10 missing config options added to 3.14 config file patch 001: rebased patch 100: rebased patch 110: rebased patch 120: rebased patch 130: rebased patch 140: minor adjustment patch 200: removed, change went upstream patch 210: rebased patch 220: removed, change went upstream patch 750: new, fixes an issue with ethernet port autoneg being disabled due to changes in kernel phy handling Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43308
* ar71xx: Added support for D-link DHP-1565 rev. A1John Crispin2014-11-1911-0/+234
| | | | | | Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl> SVN-Revision: 43307
* ar71xx: fix switch configuration in Ubiquiti UAP ProJohn Crispin2014-11-191-2/+3
| | | | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 43306
* ralink: various fixes to the wm8960 setup codeJohn Crispin2014-11-191-127/+221
| | | | | | | | | still no sound but the codec is properly detected now, powers up and i can hear noise on the speakers. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43305
* ralink: make the dmaengine driver compile under 3.14John Crispin2014-11-191-35/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43304
* ralink: fix tx vlan offload and hardware statusJohn Crispin2014-11-192-27/+40
| | | | | | | | | | | | | hardware status and tx vlan offload support on all targets except rt5350. so i modify the IS_ENABLE condition only for mt7621. support mt7621 hardware status reference by SDK. but i don't have mt7621. if not work just set mt7621 FE_REG_FE_COUNTER_BASE to 0 to let software count. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43303
* ralink: support netconsoleJohn Crispin2014-11-191-0/+15
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43302
* ralink: improve tx vlan offloadJohn Crispin2014-11-192-0/+55
| | | | | | | | | | | hardware tx vlan offload only support max 16 vids now use add/delete vlan interface to update vlan id table when duplicate vlan id index detect. disable hardware tx vlan offload support. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 43301
* ralink: merge the mt7620a/n subtargetsJohn Crispin2014-11-1912-239/+44
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43300
* ralink: set ralink_soc on mt7621John Crispin2014-11-171-12/+24
| | | | | | | | sdhci failed to init because of this Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43293
* ralink: fix pcie resetJohn Crispin2014-11-172-11/+21
| | | | | | | | | some old mt7620a uboots dont reset the pcie core properly. work around this issue in the kernel driver. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43292
* kernel: add the ubifs EOF marker support to 3.14 kernelJohn Crispin2014-11-171-0/+51
| | | | | | | | | | | Without this patch the UBIFS driver is unable to attach to the mtd storage and mount the root FS. Fixes a kernel panic with Netgear WNDR4300/3700v4 devices. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> SVN-Revision: 43287
* ramips: disable 2.4 ghz on 802.11ac wifi on WHR-1166DFelix Fietkau2014-11-161-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43283
* ramips: use mediatek,mtd-eeprom instead of ralink for mt76Felix Fietkau2014-11-161-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43282
* ramips: fix default config breakage on whr-1166dFelix Fietkau2014-11-161-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43281
* ralink: few updates tot he sdhci probe codeJohn Crispin2014-11-156-59/+76
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43275
* ralink: make the sdhci module build againJohn Crispin2014-11-142-17/+20
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43274
* ar8216: fix "unused variable" compiler warningJohn Crispin2014-11-141-1/+1
| | | | | | | | | | Most likely a copy & paste error when deriving ar8327_sw_set_ports from ar8xxx_sw_set_ports. Remove unused variable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 43273
* lantiq: Concatenate multiple flash chips for lantiq-flashJohn Crispin2014-11-141-0/+215
| | | | | | | Signed-off-by: Maikel Bloemendal <openwrt@maikelenyvonne.nl> Tested-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 43272
* ar71xx: Fix the sys LEDs on the EasyLink M150 and miniJohn Crispin2014-11-143-3/+3
| | | | | | | | Sets the system LED on the EasyLink M150 and mini to lower-case "easylink" Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 43271
* ar71xx: adjust MR900 profile for the OpenMesh MR900v2 boardJohn Crispin2014-11-141-2/+2
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43270
* ar71xx: add sysupgrade support for OpenMesh MR900v2John Crispin2014-11-142-0/+3
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43267
* ar71xx: add user-space support for OpenMesh MR900v2John Crispin2014-11-144-2/+8
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43266
* ar71xx: add kernel support for the OpenMesh MR900v2John Crispin2014-11-143-0/+21
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43265
* ar71xx: create profile and build image for the OpenMesh MR900 boardJohn Crispin2014-11-142-1/+13
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43264
* ar71xx: enable sysupgrade for the OpenMesh MR900John Crispin2014-11-142-1/+8
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43261
* ar71xx: add user-space support for the OpenMesh MR900 boardJohn Crispin2014-11-144-0/+13
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43259
* ar71xx: add kernel support for the OpenMesh MR900 boardJohn Crispin2014-11-145-0/+238
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43258
* lantiq: vgv7519 - set some defaults for ledsJohn Crispin2014-11-141-0/+7
| | | | | | Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 43256
* lantiq: set default led configuration from /sys entry later, after per board ↵John Crispin2014-11-141-5/+5
| | | | | | | | settings Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 43255
* ralink: dont define pm_poweroffJohn Crispin2014-11-142-0/+15
| | | | | | | | this makes gpio-poweroff work Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43254
* ralink: fix bank detection in mt7621 gpio driverJohn Crispin2014-11-141-12/+21
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43253
* ralink: enable the proper drivers in the mt7621 configJohn Crispin2014-11-141-23/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43252
* ralink: fix broken pinmux function naming inside mt7621.cJohn Crispin2014-11-141-30/+50
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43251
* ralink: update sdhci driverJohn Crispin2014-11-141-936/+2332
| | | | | | | | the new driver handles newer SoCs Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43250
* ralink: update pcie driver to load ranges from dtsJohn Crispin2014-11-144-30/+114
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43249
* ralink: add a new global ralink_soc variableJohn Crispin2014-11-141-0/+230
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43248
* ralink: update ethernet driver to use new ralink_soc variableJohn Crispin2014-11-142-42/+7
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43247
* ralink: fix the 10mbit bug on mt7621John Crispin2014-11-141-1/+1
| | | | | | | | a missing "val =" caused the AN bit in the phy0 reg to be flushed. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43246
* ralink: improve mt7530 supportJohn Crispin2014-11-141-2/+16
| | | | | | | | the SDK does a bit of extra init that we did not do yet when using an external mt7530. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43245
* ralink: add support for WSR-600/1166John Crispin2014-11-147-1/+317
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43244
* ralink: mt7621 has a different base addr for PVIDJohn Crispin2014-11-141-1/+19
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43243
* ralink: drop some unused code from pci-mt7620aJohn Crispin2014-11-141-18/+8
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43242
* ralink: fix up dts for mt7621 eval boardJohn Crispin2014-11-124-26/+9
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43238
generated by cgit v1.1 at 2024-12-27 15:00:59 +0000