summaryrefslogtreecommitdiff
path: root/target/linux
Commit message (Expand)AuthorAgeFilesLines
* ralink: rt3883: disable the 2GHz band on the RT-N56UGabor Juhos2012-02-181-0/+1
* ramips: rt3883: make rt3883_wlan_data visibleGabor Juhos2012-02-182-4/+4
* generic: add disable_[25]ghz to struct rt2x00_platform_dataGabor Juhos2012-02-181-0/+3
* ar71xx: fix image signature for UBNT-XM boardsGabor Juhos2012-02-181-5/+5
* generic/2.6.37: fix 'set but unused' build errors on MIPSGabor Juhos2012-02-171-0/+44
* ramips: extract eeprom for the built-in wlan module on the RT-N56UGabor Juhos2012-02-161-1/+3
* ramips: rt3883: change eeprom file nameGabor Juhos2012-02-161-1/+1
* Disable by default padding of imagesVasilis Tsiligiannis2012-02-161-1/+0
* Allow gzipping of squashfs images with padded jffs2 partitionVasilis Tsiligiannis2012-02-161-0/+3
* GZip only ext4 and padded imagesVasilis Tsiligiannis2012-02-162-4/+7
* Make gzipping of images configurable via menuconfigVasilis Tsiligiannis2012-02-162-5/+23
* ar71xx: remove duplicated define from the D-Link profileGabor Juhos2012-02-161-3/+0
* ramips: select HW_HAS_PCI on per-board basisGabor Juhos2012-02-163-2/+2
* ramips: rt3883: remove a stray character from rt3883.hGabor Juhos2012-02-161-1/+0
* ramips: rt288x: don't register the PCI controller on each boardGabor Juhos2012-02-163-3/+8
* ramips: raeth: separate ring allocation and setupGabor Juhos2012-02-161-44/+90
* generic: add SND_PPC symbolGabor Juhos2012-02-163-0/+3
* Add Ubiquiti UniFi Profile; It's an AP without USB so don't include USB drive...Daniel Dickinson2012-02-161-0/+11
* d-link: Add DIR-601 Profile Definition; It needs different factory images tha...Daniel Dickinson2012-02-162-0/+19
* Fix partitions for Cameo-based boards; kernel 3.2 is biggerDaniel Dickinson2012-02-161-4/+4
* image: For Cameo-based board fix adding mtd layout to kernel commandline)Daniel Dickinson2012-02-161-1/+1
* linux 3.2: missing generic symbolsJo-Philipp Wich2012-02-151-0/+2
* ramips: rt288x: fix PCI resource conflictGabor Juhos2012-02-151-0/+8
* correct PCI IO/Mem resource swappingFlorian Fainelli2012-02-151-4/+4
* add Ralink V11ST-FE board supportFlorian Fainelli2012-02-1511-0/+134
* ramips: raeth: add a helper function for skb allocationGabor Juhos2012-02-151-6/+16
* ramips: raeth: use netdev_alloc_skbGabor Juhos2012-02-151-2/+3
* ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor struct...Gabor Juhos2012-02-151-2/+2
* ramips: raeth: use 're' instead of 'priv' everywhereGabor Juhos2012-02-151-73/+73
* ramips: raeth: force link down in ramips_phy_stopGabor Juhos2012-02-151-7/+6
* ramips: raeth: serialize ramips_link_adjust callsGabor Juhos2012-02-151-0/+8
* ramips: raeth: add PHYLIB supportGabor Juhos2012-02-155-10/+229
* linux-atm: update solos-pci driver to upstreamJohn Crispin2012-02-143-0/+1044
* linux-atm: headroom/padding fixesJohn Crispin2012-02-143-0/+249
* generate uboot environment data in targetJohn Crispin2012-02-141-0/+32
* fix compile error in previous commitJohn Crispin2012-02-141-10/+10
* Support booting the Speedport W502V using BRN-BOOT.John Crispin2012-02-143-7/+158
* ramips: extract eeprom for the PCIe wlan module on the RT-N56UGabor Juhos2012-02-141-4/+12
* ramips: rt3883: enable PCI on the RT-N56U boardGabor Juhos2012-02-141-0/+16
* ramips: rt3883: add PCI supportGabor Juhos2012-02-148-1/+548
* ramips: rt3883: sync 2.6.39 configGabor Juhos2012-02-141-7/+3
* ramips: use SoC specific irq.hGabor Juhos2012-02-143-3/+36
* fixes irq locking in ethernet driverJohn Crispin2012-02-141-0/+71
* fixes gpio_export patchJohn Crispin2012-02-141-8/+8
* add annex selection support to ltq_dsl packageJohn Crispin2012-02-142-5/+27
* ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boardsGabor Juhos2012-02-132-0/+17
* ar71xx: add model detection for TL-WR842N/NDGabor Juhos2012-02-131-0/+3
* update to 3.2Florian Fainelli2012-02-131-1/+1
* fix titan gpio register sizeFlorian Fainelli2012-02-131-0/+33
* ramips: rt3883: update package list in the default profileGabor Juhos2012-02-131-1/+1